[PATCH v2 2/2] arm64: dts: mediatek: Set mediatek,mac-wol on DWMAC node for all boards

[AngeloGioacchino Del Regno]

Il 14/11/24 20:22, Nícolas F. R. A. Prado ha scritto:
> On Thu, Nov 14, 2024 at 10:26:34AM +0100, AngeloGioacchino Del Regno wrote:
>> Il 09/11/24 16:16, Nícolas F. R. A. Prado ha scritto:
>>> Due to the mediatek,mac-wol property previously being handled backwards
>>> by the dwmac-mediatek driver, its use in the DTs seems to have been
>>> inconsistent.
>>>
>>> Now that the driver has been fixed, correct this description. All the
>>> currently upstream boards support MAC WOL, so add the mediatek,mac-wol
>>> property to the missing ones.
>>>
>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
>>> ---
>>>    arch/arm64/boot/dts/mediatek/mt2712-evb.dts                   | 1 +
>>>    arch/arm64/boot/dts/mediatek/mt8195-demo.dts                  | 1 +
>>>    arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts | 1 +
>>>    3 files changed, 3 insertions(+)
>>>
>>
>> ..snip..
>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>>> index 31d424b8fc7cedef65489392eb279b7fd2194a4a..c12684e8c449b2d7b3b3a79086925bfe5ae0d8f8 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
>>> @@ -109,6 +109,7 @@ &eth {
>>>    	pinctrl-names = "default", "sleep";
>>>    	pinctrl-0 = <&eth_default_pins>;
>>>    	pinctrl-1 = <&eth_sleep_pins>;
>>> +	mediatek,mac-wol;
>>
>> The demo board has the same WoL capability as the EVK, so you can avoid adding the
>> mac-wol property here.
> 
> Not sure I follow... If we omit the property here it will use PHY WOL instead,
> while the genio 1200 EVK has the property, so it will be using MAC WOL, so
> they're already the same and omitting will make them behave differently...
> 
> Let me recap to make sure we're all on the same page:
> 
> This was the WOL configuration for each board before this series:
> MAC mt2712-evb.dts
> MAC mt8195-demo.dts
> PHY mt8395-genio-1200-evk.dts
> MAC mt8395-kontron-3-5-sbc-i1200.dts
> PHY mt8395-radxa-nio-12l.dts
> PHY mt8390-genio-700-evk.dts
> 
> After patch 1, they all get inverted:
> PHY mt2712-evb.dts
> PHY mt8195-demo.dts
> MAC mt8395-genio-1200-evk.dts
> PHY mt8395-kontron-3-5-sbc-i1200.dts
> MAC mt8395-radxa-nio-12l.dts
> MAC mt8390-genio-700-evk.dts
> 
> And after patch 2, the remaining PHY ones are set to MAC:
> MAC mt2712-evb.dts
> MAC mt8195-demo.dts
> MAC mt8395-genio-1200-evk.dts
> MAC mt8395-kontron-3-5-sbc-i1200.dts
> MAC mt8395-radxa-nio-12l.dts
> MAC mt8390-genio-700-evk.dts
> 
> The only board I have in hands and am able to test is mt8390-genio-700-evk.dts,
> which requires MAC WOL to work. For the others, your feedback on v1 was that
> they should all be set to MAC WOL. Except for mt2712, which you were not sure
> about, but it was already set to MAC WOL so we're keeping the same behavior.
> 
> That's how we got to adding mediatek,mac-wol to mt8195-demo.dts,
> mt8395-kontron-3-5-sbc-i1200.dts and mt2712-evb.dts. Let me know if there has
> been some misunderstanding.
> 

No, it's me getting confused about the current status - and I'm sorry about that.

So just ignore me saying "we can avoid adding" - we can't.
This commit is definitely needed.

Cheers,
Angelo

> Thanks,
> Nícolas
> 
>>
>>>    	status = "okay";
>>>    	mdio {
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
>>> index e2e75b8ff91880711c82f783c7ccbef4128b7ab4..4985b65925a9ed10ad44a6e58b9657a9dd48751f 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
>>> @@ -271,6 +271,7 @@ &eth {
>>>    	pinctrl-names = "default", "sleep";
>>>    	pinctrl-0 = <&eth_default_pins>;
>>>    	pinctrl-1 = <&eth_sleep_pins>;
>>> +	mediatek,mac-wol;
>>
>> I'm mostly sure that Kontron's i1200 works the same as the EVK in regards to WoL.
>>
>> Michael, I recall you worked on this board - can you please confirm?
>>
>> Thanks,
>> Angelo
>>