[PATCH 1/3] media: i2c: imx290: Limit analogue gain according to module
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Nov 14 16:00:17 PST 2024
Hi Dave,
Thank you for the patch.
On Thu, Nov 14, 2024 at 04:01:13PM +0000, Dave Stevenson wrote:
> The imx327 only supports up to 29.4dB of analogue gain, vs
> the imx290 going up to 30dB. Both are in 0.3dB steps.
>
> As we now have model specific config, fix this mismatch,
> and delete the comment referencing it.
>
> Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> drivers/media/i2c/imx290.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index ee698c99001d..da654deb444a 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -176,6 +176,7 @@ struct imx290_model_info {
> enum imx290_colour_variant colour_variant;
> const struct cci_reg_sequence *init_regs;
> size_t init_regs_num;
> + unsigned int max_analog_gain;
> const char *name;
> };
>
> @@ -876,14 +877,10 @@ static int imx290_ctrl_init(struct imx290 *imx290)
> * up to 72.0dB (240) add further digital gain. Limit the range to
> * analog gain only, support for digital gain can be added separately
> * if needed.
> - *
> - * The IMX327 and IMX462 are largely compatible with the IMX290, but
> - * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital
> - * gain. When support for those sensors gets added to the driver, the
> - * gain control should be adjusted accordingly.
> */
> v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> - V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
> + V4L2_CID_ANALOGUE_GAIN, 0,
> + imx290->model->max_analog_gain, 1, 0);
>
> /*
> * Correct range will be determined through imx290_ctrl_update setting
> @@ -1441,18 +1438,21 @@ static const struct imx290_model_info imx290_models[] = {
> .colour_variant = IMX290_VARIANT_COLOUR,
> .init_regs = imx290_global_init_settings_290,
> .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
> + .max_analog_gain = 100,
> .name = "imx290",
> },
> [IMX290_MODEL_IMX290LLR] = {
> .colour_variant = IMX290_VARIANT_MONO,
> .init_regs = imx290_global_init_settings_290,
> .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
> + .max_analog_gain = 100,
> .name = "imx290",
> },
> [IMX290_MODEL_IMX327LQR] = {
> .colour_variant = IMX290_VARIANT_COLOUR,
> .init_regs = imx290_global_init_settings_327,
> .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_327),
> + .max_analog_gain = 98,
> .name = "imx327",
> },
> };
>
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list