[PATCH 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings

[Bjorn Helgaas]

On Tue, Nov 12, 2024 at 05:19:21PM +0100, Christian Bruel wrote:
> Document the bindings for STM32MP25 PCIe Controller configured in
> root complex mode.
> Supports 4 legacy interrupts and MSI interrupts from the ARM
> GICv2m controller.
> 
> Allow tuning to change payload (default 128B) thanks to the
> st,max-payload-size entry.
> Can also limit the Maximum Read Request Size on downstream devices to the
> minimum possible value between 128B and 256B.
> 
> STM32 PCIE may be in a power domain which is the case for the STM32MP25
> based boards.
> Supports wake# from wake-gpios

> +  st,limit-mrrs:
> +    description: If present limit downstream MRRS to 256B
> +    type: boolean
> +
> +  st,max-payload-size:
> +    description: Maximum Payload size to use
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [128, 256]
> +    default: 128

MRRS and MPS are not specific to this device.  Not sure why you need
them, but if you do need them, I think they should be generic.