[PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527
Rob Herring
robh at kernel.org
Tue Nov 12 07:38:05 PST 2024
On Mon, Nov 11, 2024 at 12:57:48AM +0000, Andre Przywara wrote:
> The A523 contains a pin controller similar to previous SoCs, although
> using 10 GPIO banks (PortB-PortK), all of them being IRQ capable.
> This introduces a new style of binding, where the pinmux values for each
> pin group is stored in the new "allwinner,pinmux" property in the DT
> node, instead of requiring every driver to store a mapping between the
> function names and the required pinmux.
>
> Add the new name to the list of compatible strings, and required it to
> have 10 interrupts described. Also add the new pinmux property.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 23 +++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index 4502405703145..6fc18e92e1e94 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -56,6 +56,8 @@ properties:
> - allwinner,sun50i-h6-r-pinctrl
> - allwinner,sun50i-h616-pinctrl
> - allwinner,sun50i-h616-r-pinctrl
> + - allwinner,sun55i-a523-pinctrl
> + - allwinner,sun55i-a523-r-pinctrl
> - allwinner,suniv-f1c100s-pinctrl
> - nextthing,gr8-pinctrl
>
> @@ -64,7 +66,7 @@ properties:
>
> interrupts:
> minItems: 1
> - maxItems: 8
> + maxItems: 10
> description:
> One interrupt per external interrupt bank supported on the
> controller, sorted by bank number ascending order.
> @@ -119,13 +121,17 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/uint32
> enum: [10, 20, 30, 40]
>
> + allwinner,pinmux:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: pinmux selector for each pin
Please add some constraints and/or description about what goes in the
array.
> +
> required:
> - pins
> - function
>
> additionalProperties: false
>
> - "^vcc-p[a-ilm]-supply$":
> + "^vcc-p[a-klm]-supply$":
> description:
> Power supplies for pin banks.
>
> @@ -156,6 +162,17 @@ allOf:
> - interrupts
> - interrupt-controller
>
> + - if:
> + properties:
> + compatible:
> + enum:
> + - allwinner,sun55i-a523-pinctrl
> +
> + then:
> + properties:
> + interrupts:
> + minItems: 10
> +
> - if:
> properties:
> compatible:
> @@ -166,6 +183,7 @@ allOf:
> properties:
> interrupts:
> minItems: 8
> + maxItems: 8
>
> - if:
> properties:
> @@ -244,6 +262,7 @@ allOf:
> - allwinner,sun8i-v3s-pinctrl
> - allwinner,sun9i-a80-r-pinctrl
> - allwinner,sun50i-h6-r-pinctrl
> + - allwinner,sun55i-a523-r-pinctrl
>
> then:
> properties:
> --
> 2.46.2
>
More information about the linux-arm-kernel
mailing list