[PATCH v5 1/5] dt-bindings: pinctrl: modify gpio-cells property

[Neil Armstrong]

Hi,

On 12/11/2024 11:26, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
> 
> Extend the value range of #gpio-cells property, including [2, 3],
> to compatible with Amlogic A4 SoC and later chips's pinctrl module.
> The early GPIO parameter number is 2, and the later GPIO parameter
> number is 3.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
> ---
>   .../devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml       | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> index e707c222a07f..6b53577dea59 100644
> --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
> @@ -36,7 +36,7 @@ $defs:
>         gpio-controller: true
>   
>         "#gpio-cells":
> -        const: 2
> +        enum: [2, 3]
>   
>         gpio-ranges:
>           maxItems: 1
> 

This is not what I expected, this allows 3 cells for all Amlogic pinctrl,
which is wrong.

Instead, remove "#gpio-cells" definition from amlogic,meson-pinctrl-common.yaml
and add them in all amlogic,meson-pinctrl-XXX.yaml with const: 2, and then when you
introduce A4/A5, add a new amlogic,meson-pinctrl-a5.yaml with const: 3.

Neil