[PATCH v2 3/4] hwmon: tmp108: Add support for I3C device

[Jonathan Cameron]

On Fri, 08 Nov 2024 17:26:57 -0500
Frank Li <Frank.Li at nxp.com> wrote:

> Add support for I3C device in the tmp108 driver to handle the P3T1085
> sensor. Register the I3C device driver to enable I3C functionality for the
> sensor.
> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>  drivers/hwmon/tmp108.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c
> index bfbea6349a95f..83d6847cb542c 100644
> --- a/drivers/hwmon/tmp108.c
> +++ b/drivers/hwmon/tmp108.c
> @@ -13,6 +13,8 @@
>  #include <linux/mutex.h>
>  #include <linux/of.h>
>  #include <linux/i2c.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>

Seems odd you need master.h in a device driver.
I'll guess that's because you should be using i3cdev_to_device()
and not looking in the i3c_device structure at all.


>  #include <linux/init.h>
>  #include <linux/jiffies.h>
>  #include <linux/regmap.h>
> @@ -442,6 +444,35 @@ static struct i2c_driver tmp108_driver = {
>  
>  module_i2c_driver(tmp108_driver);
>  
> +#ifdef CONFIG_REGMAP_I3C
> +static const struct i3c_device_id p3t1085_i3c_ids[] = {
> +	I3C_DEVICE(0x011b, 0x1529, NULL),
> +	{},

Trivial, but no trailing comma needed here as nothing can come after
this terminator entry.  That is also consistent with existing similar
tables in this driver.

> +};
> +MODULE_DEVICE_TABLE(i3c, p3t1085_i3c_ids);
> +
> +static int p3t1085_i3c_probe(struct i3c_device *i3cdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_i3c(i3cdev, &tmp108_regmap_config);
> +	if (IS_ERR(regmap))
> +		return dev_err_probe(&i3cdev->dev, PTR_ERR(regmap),
> +				     "Failed to register i3c regmap\n");
> +
> +	return tmp108_common_probe(&i3cdev->dev, regmap, "p3t1085_i3c");
> +}
> +
> +static struct i3c_driver p3t1085_driver = {
> +	.driver = {
> +		.name = "p3t1085_i3c",
> +	},
> +	.probe = p3t1085_i3c_probe,
> +	.id_table = p3t1085_i3c_ids,
> +};
> +module_i3c_driver(p3t1085_driver);
> +#endif
> +
>  MODULE_AUTHOR("John Muir <john at jmuir.com>");
>  MODULE_DESCRIPTION("Texas Instruments TMP108 temperature sensor driver");
>  MODULE_LICENSE("GPL");
>