[PATCH] clk: sunxi-ng: a100: enable MMC clock reparenting

[Cody Eksal]

While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.

[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest

Fixes: fb038ce4db55 ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable at vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd at epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
index bbaa82978716..a59e420b195d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
@@ -436,7 +436,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 					  0, 4,		/* M */
@@ -444,7 +444,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
 					  0, 4,		/* M */
@@ -452,7 +452,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
 static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
-- 
2.47.0