[PATCH 2/3] arm64: dts: freescale: Add i.MX91 dtsi support

[Pengfei Li]

On Thu, Nov 07, 2024 at 02:06:27PM +0100, Alexander Stein wrote:
> Am Donnerstag, 7. November 2024, 13:49:50 CET schrieb Alexander Stein:
> > > diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > > new file mode 100644
> > > index 000000000000..a9f4c1fe61cc
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > > @@ -0,0 +1,66 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright 2024 NXP
> > > + */
> > > +
> > > +#include "imx91-pinfunc.h"
> > > +#include "imx93.dtsi"
> > > +
> > > +&{/thermal-zones/cpu-thermal/cooling-maps/map0} {
> > > +	cooling-device =
> > > +		<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > > +};
> > > +
> > > +&clk {
> > > +	compatible = "fsl,imx91-ccm";
> > > +};
> > > +
> > > +&eqos {
> > > +	clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > > +			<&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > > +			<&clk IMX91_CLK_ENET_TIMER>,
> > > +			<&clk IMX91_CLK_ENET1_QOS_TSN>,
> > > +			<&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
> > > +	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > > +				<&clk IMX91_CLK_ENET1_QOS_TSN>;
> > > +	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > > +					<&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> > 
> > Is it just me or is the alignment of new lines not matching?
> > 
> > 
> > > +};
> > > +
> > > +&fec {
> > > +	clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > > +			<&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > > +			<&clk IMX91_CLK_ENET_TIMER>,
> > > +			<&clk IMX91_CLK_ENET2_REGULAR>,
> > > +			<&clk IMX93_CLK_DUMMY>;
> > > +	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > > +				<&clk IMX91_CLK_ENET2_REGULAR>;
> > > +	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > > +					<&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> > 
> > Here as well: Is it just me or is the alignment of new lines not matching?
> > 
> > > +	assigned-clock-rates = <100000000>, <250000000>;
> > > +};
> > > +
> > > +&i3c1 {
> > > +	clocks = <&clk IMX93_CLK_BUS_AON>,
> > > +			<&clk IMX93_CLK_I3C1_GATE>,
> > > +			<&clk IMX93_CLK_DUMMY>;
> > > +};
> > > +
> > > +&i3c2 {
> > > +	clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
> > > +			<&clk IMX93_CLK_I3C2_GATE>,
> > > +			<&clk IMX93_CLK_DUMMY>;
> > > +};
> > > +
> > > +&tmu {
> > > +	status = "disabled";
> > 
> > Why does the TMU needs to be disabled instead of deleted?
> > 
> > > +};
> > > +
> > > +/* i.MX91 only has one A core */
> > > +/delete-node/ &A55_1;
> > > +
> > > +/* i.MX91 not has cm33 */
> > > +/delete-node/ &cm33;
> > > +
> > > +/* i.MX91 not has power-domain at 44461800 */
> > > +/delete-node/ &mlmix;
> > > 
> > 
> > Shouldn't the following node also be removed?
> > * mipi_csi
> > * dsi
> > * lvds_bridge
> > * lcdif_to_dsi
> > * lcdif_to_ldb
> 
> Add mu1 and mu2 to that list.

Hi, i.MX91 also has mu1 and mu2. so there is no need to remove them here.

BR,
Pengfei Li