[PATCH v3 2/2] perf arm-spe: Add support for SPE Data Source packet on AmpereOne
Leo Yan
leo.yan at arm.com
Thu Nov 7 07:44:24 PST 2024
On Wed, Nov 06, 2024 at 07:37:40PM +0000, Ilkka Koskinen wrote:
> Warning: EXTERNAL SENDER, use caution when opening links or attachments.
>
>
> Decode SPE Data Source packets on AmpereOne. The field is IMPDEF.
>
> Signed-off-by: Ilkka Koskinen <ilkka at os.amperecomputing.com>
> ---
> .../util/arm-spe-decoder/arm-spe-decoder.h | 9 +++++
> tools/perf/util/arm-spe.c | 39 +++++++++++++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> index 358c611eeddb..4bcd627e859f 100644
> --- a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> +++ b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> @@ -67,6 +67,15 @@ enum arm_spe_common_data_source {
> ARM_SPE_COMMON_DS_DRAM = 0xe,
> };
>
> +enum arm_spe_ampereone_data_source {
> + ARM_SPE_AMPEREONE_LOCAL_CHIP_CACHE_OR_DEVICE = 0x0,
> + ARM_SPE_AMPEREONE_SLC = 0x3,
> + ARM_SPE_AMPEREONE_REMOTE_CHIP_CACHE = 0x5,
> + ARM_SPE_AMPEREONE_DDR = 0x7,
> + ARM_SPE_AMPEREONE_L1D = 0x8,
> + ARM_SPE_AMPEREONE_L2D = 0x9,
> +};
> +
> struct arm_spe_record {
> enum arm_spe_sample_type type;
> int err;
> diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
> index b222557cc27a..40847a3d18b0 100644
> --- a/tools/perf/util/arm-spe.c
> +++ b/tools/perf/util/arm-spe.c
> @@ -531,6 +531,44 @@ static void arm_spe__synth_data_source_common(const struct arm_spe_record *recor
> }
> }
>
> +/*
> + * Source is IMPDEF. Here we convert the source code used on AmpereOne cores
> + * to the common (Neoverse, Cortex) to avoid duplicating the decoding code.
> + */
> +static void arm_spe__synth_data_source_ampereone(const struct arm_spe_record *record,
> + union perf_mem_data_src *data_src)
> +{
> + struct arm_spe_record common_record;
> +
> + switch (record->source) {
> + case ARM_SPE_AMPEREONE_LOCAL_CHIP_CACHE_OR_DEVICE:
> + common_record.source = ARM_SPE_COMMON_DS_PEER_CORE;
> + break;
> + case ARM_SPE_AMPEREONE_SLC:
> + common_record.source = ARM_SPE_COMMON_DS_SYS_CACHE;
> + break;
> + case ARM_SPE_AMPEREONE_REMOTE_CHIP_CACHE:
> + common_record.source = ARM_SPE_COMMON_DS_REMOTE;
> + break;
> + case ARM_SPE_AMPEREONE_DDR:
> + common_record.source = ARM_SPE_COMMON_DS_DRAM;
> + break;
> + case ARM_SPE_AMPEREONE_L1D:
> + common_record.source = ARM_SPE_COMMON_DS_L1D;
> + break;
> + case ARM_SPE_AMPEREONE_L2D:
> + common_record.source = ARM_SPE_COMMON_DS_L2;
> + break;
> + default:
> + /* Assign a bogus value that's not used for common coding */
> + common_record.source = 0xffff;
For unsupported source value, just bail out and no need to calling
arm_spe__synth_data_source_common().
It is good to use pr_warning_once() to print out warning log to remind
users.
Thanks,
Leo
> + break;
> + }
> +
> + common_record.op = record->op;
> + arm_spe__synth_data_source_common(&common_record, data_src);
> +}
> +
> static const struct data_src data_sources[] = {
> DS(MIDR_ALL_VERSIONS(MIDR_CORTEX_A720), data_source_common),
> DS(MIDR_ALL_VERSIONS(MIDR_CORTEX_A725), data_source_common),
> @@ -541,6 +579,7 @@ static const struct data_src data_sources[] = {
> DS(MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2), data_source_common),
> DS(MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1), data_source_common),
> DS(MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2), data_source_common),
> + DS(MIDR_ALL_VERSIONS(MIDR_AMPERE1A), data_source_ampereone),
> {},
> };
>
> --
> 2.47.0
>
>
More information about the linux-arm-kernel
mailing list