[PATCH v2 2/2] ASoC: stm32: i2s: add stm32mp25 support
Olivier Moysan
olivier.moysan at foss.st.com
Thu Nov 7 06:47:12 PST 2024
Add STM32MP25 support for STM32 I2S.
On STM32MP25 the I2S driver does not manage I2S kernel clock rate
by choosing its parent clock, depending on audio stream rate.
The driver requests a rate change on I2S kernel clock instead.
It tries to set the higher possible rate, which is a multiple of
the audio stream rate and which gives an accuracy of at least 1000 ppm.
Signed-off-by: Olivier Moysan <olivier.moysan at foss.st.com>
---
sound/soc/stm/stm32_i2s.c | 211 ++++++++++++++++++++++++++++++++++----
1 file changed, 189 insertions(+), 22 deletions(-)
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index faa00103ee7f..19dc61008a75 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -200,10 +200,13 @@ enum i2s_datlen {
#define STM32_I2S_NAME_LEN 32
#define STM32_I2S_RATE_11K 11025
+#define STM32_I2S_MAX_SAMPLE_RATE_8K 192000
+#define STM32_I2S_MAX_SAMPLE_RATE_11K 176400
+#define STM32_I2S_CLK_RATE_TOLERANCE 1000 /* ppm */
/**
* struct stm32_i2s_data - private data of I2S
- * @regmap_conf: I2S register map configuration pointer
+ * @conf: I2S configuration pointer
* @regmap: I2S register map pointer
* @pdev: device data pointer
* @dai_drv: DAI driver pointer
@@ -224,11 +227,14 @@ enum i2s_datlen {
* @divider: prescaler division ratio
* @div: prescaler div field
* @odd: prescaler odd field
+ * @i2s_clk_flg: flag set while exclusivity on I2S kernel clock is active
* @refcount: keep count of opened streams on I2S
* @ms_flg: master mode flag.
+ * @set_i2s_clk_rate: set I2S kernel clock rate
+ * @put_i2s_clk_rate: put I2S kernel clock rate
*/
struct stm32_i2s_data {
- const struct regmap_config *regmap_conf;
+ const struct stm32_i2s_conf *conf;
struct regmap *regmap;
struct platform_device *pdev;
struct snd_soc_dai_driver *dai_drv;
@@ -249,8 +255,21 @@ struct stm32_i2s_data {
unsigned int divider;
unsigned int div;
bool odd;
+ bool i2s_clk_flg;
int refcount;
int ms_flg;
+ int (*set_i2s_clk_rate)(struct stm32_i2s_data *i2s, unsigned int rate);
+ void (*put_i2s_clk_rate)(struct stm32_i2s_data *i2s);
+};
+
+/**
+ * struct stm32_i2s_conf - I2S configuration
+ * @regmap_conf: regmap configuration pointer
+ * @get_i2s_clk_parent: get parent clock of I2S kernel clock
+ */
+struct stm32_i2s_conf {
+ const struct regmap_config *regmap_conf;
+ int (*get_i2s_clk_parent)(struct stm32_i2s_data *i2s);
};
struct stm32_i2smclk_data {
@@ -261,6 +280,8 @@ struct stm32_i2smclk_data {
#define to_mclk_data(_hw) container_of(_hw, struct stm32_i2smclk_data, hw)
+static int stm32_i2s_get_parent_clk(struct stm32_i2s_data *i2s);
+
static int stm32_i2s_calc_clk_div(struct stm32_i2s_data *i2s,
unsigned long input_rate,
unsigned long output_rate)
@@ -312,6 +333,33 @@ static int stm32_i2s_set_clk_div(struct stm32_i2s_data *i2s)
cgfr_mask, cgfr);
}
+static bool stm32_i2s_rate_accurate(struct stm32_i2s_data *i2s,
+ unsigned int max_rate, unsigned int rate)
+{
+ struct platform_device *pdev = i2s->pdev;
+ u64 delta, dividend;
+ int ratio;
+
+ if (!rate) {
+ dev_err(&pdev->dev, "Unexpected null rate\n");
+ return false;
+ }
+
+ ratio = DIV_ROUND_CLOSEST(max_rate, rate);
+ if (!ratio)
+ return false;
+
+ dividend = mul_u32_u32(1000000, abs(max_rate - (ratio * rate)));
+ delta = div_u64(dividend, max_rate);
+
+ if (delta <= STM32_I2S_CLK_RATE_TOLERANCE)
+ return true;
+
+ dev_dbg(&pdev->dev, "Rate [%u] not accurate\n", rate);
+
+ return false;
+}
+
static int stm32_i2s_set_parent_clock(struct stm32_i2s_data *i2s,
unsigned int rate)
{
@@ -332,6 +380,87 @@ static int stm32_i2s_set_parent_clock(struct stm32_i2s_data *i2s,
return ret;
}
+static void stm32_i2s_put_parent_rate(struct stm32_i2s_data *i2s)
+{
+ if (i2s->i2s_clk_flg) {
+ i2s->i2s_clk_flg = false;
+ clk_rate_exclusive_put(i2s->i2sclk);
+ }
+}
+
+static int stm32_i2s_set_parent_rate(struct stm32_i2s_data *i2s,
+ unsigned int rate)
+{
+ struct platform_device *pdev = i2s->pdev;
+ unsigned int i2s_clk_rate, i2s_clk_max_rate, i2s_curr_rate, i2s_new_rate;
+ int ret, div;
+
+ /*
+ * Set maximum expected kernel clock frequency
+ * - mclk on:
+ * f_i2s_ck = MCKDIV * mclk-fs * fs
+ * Here typical 256 ratio is assumed for mclk-fs
+ * - mclk off:
+ * f_i2s_ck = MCKDIV * FRL * fs
+ * Where FRL=[16,32], MCKDIV=[1..256]
+ * f_i2s_ck = i2s_clk_max_rate * 32 / 256
+ */
+ if (!(rate % STM32_I2S_RATE_11K))
+ i2s_clk_max_rate = STM32_I2S_MAX_SAMPLE_RATE_11K * 256;
+ else
+ i2s_clk_max_rate = STM32_I2S_MAX_SAMPLE_RATE_8K * 256;
+
+ if (!i2s->i2smclk)
+ i2s_clk_max_rate /= 8;
+
+ /* Request exclusivity, as the clock may be shared by I2S instances */
+ clk_rate_exclusive_get(i2s->i2sclk);
+ i2s->i2s_clk_flg = true;
+
+ /*
+ * Check current kernel clock rate. If it gives the expected accuracy
+ * return immediately.
+ */
+ i2s_curr_rate = clk_get_rate(i2s->i2sclk);
+ if (stm32_i2s_rate_accurate(i2s, i2s_clk_max_rate, i2s_curr_rate))
+ return 0;
+
+ /*
+ * Otherwise try to set the maximum rate and check the new actual rate.
+ * If the new rate does not give the expected accuracy, try to set
+ * lower rates for the kernel clock.
+ */
+ i2s_clk_rate = i2s_clk_max_rate;
+ div = 1;
+ do {
+ /* Check new rate accuracy. Return if ok */
+ i2s_new_rate = clk_round_rate(i2s->i2sclk, i2s_clk_rate);
+ if (stm32_i2s_rate_accurate(i2s, i2s_clk_rate, i2s_new_rate)) {
+ ret = clk_set_rate(i2s->i2sclk, i2s_clk_rate);
+ if (ret) {
+ dev_err(&pdev->dev, "Error %d setting i2s_clk_rate rate. %s",
+ ret, ret == -EBUSY ?
+ "Active stream rates may be in conflict\n" : "\n");
+ goto err;
+ }
+
+ return 0;
+ }
+
+ /* Try a lower frequency */
+ div++;
+ i2s_clk_rate = i2s_clk_max_rate / div;
+ } while (i2s_clk_rate > rate);
+
+ /* no accurate rate found */
+ dev_err(&pdev->dev, "Failed to find an accurate rate");
+
+err:
+ stm32_i2s_put_parent_rate(i2s);
+
+ return -EINVAL;
+}
+
static long stm32_i2smclk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
@@ -635,12 +764,16 @@ static int stm32_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
clk_rate_exclusive_put(i2s->i2smclk);
i2s->mclk_rate = 0;
}
+
+ if (i2s->put_i2s_clk_rate)
+ i2s->put_i2s_clk_rate(i2s);
+
return regmap_update_bits(i2s->regmap,
STM32_I2S_CGFR_REG,
I2S_CGFR_MCKOE, 0);
}
/* If master clock is used, set parent clock now */
- ret = stm32_i2s_set_parent_clock(i2s, freq);
+ ret = i2s->set_i2s_clk_rate(i2s, freq);
if (ret)
return ret;
ret = clk_set_rate_exclusive(i2s->i2smclk, freq);
@@ -667,10 +800,11 @@ static int stm32_i2s_configure_clock(struct snd_soc_dai *cpu_dai,
u32 cgfr;
int ret;
- if (!(rate % 11025))
- clk_set_parent(i2s->i2sclk, i2s->x11kclk);
- else
- clk_set_parent(i2s->i2sclk, i2s->x8kclk);
+ if (!i2s->mclk_rate) {
+ ret = i2s->set_i2s_clk_rate(i2s, rate);
+ if (ret)
+ return ret;
+ }
i2s_clock_rate = clk_get_rate(i2s->i2sclk);
/*
@@ -915,6 +1049,14 @@ static void stm32_i2s_shutdown(struct snd_pcm_substream *substream,
clk_disable_unprepare(i2s->i2sclk);
+ /*
+ * Release kernel clock if following conditions are fulfilled
+ * - Master clock is not used. Kernel clock won't be released trough sysclk
+ * - Put handler is defined. Involve that clock is managed exclusively
+ */
+ if (!i2s->i2smclk && i2s->put_i2s_clk_rate)
+ i2s->put_i2s_clk_rate(i2s);
+
spin_lock_irqsave(&i2s->irq_lock, flags);
i2s->substream = NULL;
spin_unlock_irqrestore(&i2s->irq_lock, flags);
@@ -1012,14 +1154,36 @@ static int stm32_i2s_dais_init(struct platform_device *pdev,
return 0;
}
+static const struct stm32_i2s_conf stm32_i2s_conf_h7 = {
+ .regmap_conf = &stm32_h7_i2s_regmap_conf,
+ .get_i2s_clk_parent = stm32_i2s_get_parent_clk,
+};
+
+static const struct stm32_i2s_conf stm32_i2s_conf_mp25 = {
+ .regmap_conf = &stm32_h7_i2s_regmap_conf
+};
+
static const struct of_device_id stm32_i2s_ids[] = {
- {
- .compatible = "st,stm32h7-i2s",
- .data = &stm32_h7_i2s_regmap_conf
- },
+ { .compatible = "st,stm32h7-i2s", .data = &stm32_i2s_conf_h7 },
+ { .compatible = "st,stm32mp25-i2s", .data = &stm32_i2s_conf_mp25 },
{},
};
+static int stm32_i2s_get_parent_clk(struct stm32_i2s_data *i2s)
+{
+ struct device *dev = &i2s->pdev->dev;
+
+ i2s->x8kclk = devm_clk_get(dev, "x8k");
+ if (IS_ERR(i2s->x8kclk))
+ return dev_err_probe(dev, PTR_ERR(i2s->x8kclk), "Cannot get x8k parent clock\n");
+
+ i2s->x11kclk = devm_clk_get(dev, "x11k");
+ if (IS_ERR(i2s->x11kclk))
+ return dev_err_probe(dev, PTR_ERR(i2s->x11kclk), "Cannot get x11k parent clock\n");
+
+ return 0;
+}
+
static int stm32_i2s_parse_dt(struct platform_device *pdev,
struct stm32_i2s_data *i2s)
{
@@ -1031,8 +1195,8 @@ static int stm32_i2s_parse_dt(struct platform_device *pdev,
if (!np)
return -ENODEV;
- i2s->regmap_conf = device_get_match_data(&pdev->dev);
- if (!i2s->regmap_conf)
+ i2s->conf = device_get_match_data(&pdev->dev);
+ if (!i2s->conf)
return -EINVAL;
i2s->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
@@ -1052,15 +1216,18 @@ static int stm32_i2s_parse_dt(struct platform_device *pdev,
return dev_err_probe(&pdev->dev, PTR_ERR(i2s->i2sclk),
"Could not get i2sclk\n");
- i2s->x8kclk = devm_clk_get(&pdev->dev, "x8k");
- if (IS_ERR(i2s->x8kclk))
- return dev_err_probe(&pdev->dev, PTR_ERR(i2s->x8kclk),
- "Could not get x8k parent clock\n");
+ if (i2s->conf->get_i2s_clk_parent) {
+ i2s->set_i2s_clk_rate = stm32_i2s_set_parent_clock;
+ } else {
+ i2s->set_i2s_clk_rate = stm32_i2s_set_parent_rate;
+ i2s->put_i2s_clk_rate = stm32_i2s_put_parent_rate;
+ }
- i2s->x11kclk = devm_clk_get(&pdev->dev, "x11k");
- if (IS_ERR(i2s->x11kclk))
- return dev_err_probe(&pdev->dev, PTR_ERR(i2s->x11kclk),
- "Could not get x11k parent clock\n");
+ if (i2s->conf->get_i2s_clk_parent) {
+ ret = i2s->conf->get_i2s_clk_parent(i2s);
+ if (ret)
+ return ret;
+ }
/* Register mclk provider if requested */
if (of_property_present(np, "#clock-cells")) {
@@ -1126,7 +1293,7 @@ static int stm32_i2s_probe(struct platform_device *pdev)
return ret;
i2s->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "pclk",
- i2s->base, i2s->regmap_conf);
+ i2s->base, i2s->conf->regmap_conf);
if (IS_ERR(i2s->regmap))
return dev_err_probe(&pdev->dev, PTR_ERR(i2s->regmap),
"Regmap init error\n");
--
2.25.1
More information about the linux-arm-kernel
mailing list