[PATCH v2 5/5] arm64: dts: sprd: sc9863a: reorder clocks, clock-names per bindings

[Stanislav Jakubek]

DT bindings expect the SC9863A clock-controller clocks/clock-names to be
in a specific order, reorder them.

Signed-off-by: Stanislav Jakubek <stano.jakubek at gmail.com>
---
Changes in V2:
- new patch

 arch/arm64/boot/dts/sprd/sc9863a.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
index 31172ac44adc..e97000e560e7 100644
--- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -163,18 +163,18 @@ gic: interrupt-controller at 14000000 {
 		ap_clk: clock-controller at 21500000 {
 			compatible = "sprd,sc9863a-ap-clk";
 			reg = <0 0x21500000 0 0x1000>;
-			clocks = <&ext_32k>, <&ext_26m>;
-			clock-names = "ext-32k", "ext-26m";
+			clocks = <&ext_26m>, <&ext_32k>;
+			clock-names = "ext-26m", "ext-32k";
 			#clock-cells = <1>;
 		};
 
 		aon_clk: clock-controller at 402d0000 {
 			compatible = "sprd,sc9863a-aon-clk";
 			reg = <0 0x402d0000 0 0x1000>;
-			clocks = <&ext_26m>, <&rco_100m>,
-				 <&ext_32k>, <&ext_4m>;
-			clock-names = "ext-26m", "rco-100m",
-				      "ext-32k", "ext-4m";
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
 			#clock-cells = <1>;
 		};
 
-- 
2.43.0