[PATCH v4 0/3] ARM: dts: add Kobo Clara 2E

[Andreas Kemnade]

Add a basic device tree for the Kobo Clara 2E Ebook reader.
It is equipped with an i.MX6SLL SoC. EPDC PMIC drivers
are not ready for mainline yet.

Changes in V4:
- fix order of pinmux nodes
- remove some blank lines

Changes in V3:
- removed 30MegaOhm current sense resistor nonsense

Changes in V2:
- improved commit message about devices without binding

Andreas Kemnade (3):
  dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
  ARM: dts: imx: Add devicetree for Kobo Clara 2E
  ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E

 .../devicetree/bindings/arm/fsl.yaml          |   8 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   2 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-a.dts    |  23 +
 .../dts/nxp/imx/imx6sll-kobo-clara2e-b.dts    |  23 +
 .../nxp/imx/imx6sll-kobo-clara2e-common.dtsi  | 511 ++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig          |   2 +
 6 files changed, 569 insertions(+)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi

-- 
2.39.5