[PATCH v2 13/15] iio: light: apds9306: simplifies if branch in apds9306_write_event_config

[Julien Stephan]

Le sam. 2 nov. 2024 à 14:21, Subhajit Ghosh
<subhajit.ghosh at tweaklogic.com> a écrit :
>
> On 2/11/24 03:11, Jonathan Cameron wrote:
> > On Thu, 31 Oct 2024 16:27:08 +0100
> > Julien Stephan <jstephan at baylibre.com> wrote:
> >
> >> Simplifies the regmap_wite if branch in apds9306_write_event_config.
> > Applied.
> >>
> >> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> >> ---
> >>   drivers/iio/light/apds9306.c | 5 +----
> >>   1 file changed, 1 insertion(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/iio/light/apds9306.c b/drivers/iio/light/apds9306.c
> >> index 8adc74040db2bddf93fbb773e3519abcc726b9a6..9c08e7c3ad0c17519689a630d42fe9b90438dfe8 100644
> >> --- a/drivers/iio/light/apds9306.c
> >> +++ b/drivers/iio/light/apds9306.c
> >> @@ -1125,10 +1125,7 @@ static int apds9306_write_event_config(struct iio_dev *indio_dev,
> >>              }
> >>      }
> >>      case IIO_EV_TYPE_THRESH_ADAPTIVE:
> >> -            if (state)
> >> -                    return regmap_field_write(rf->int_thresh_var_en, 1);
> >> -            else
> >> -                    return regmap_field_write(rf->int_thresh_var_en, 0);
> >> +            return regmap_field_write(rf->int_thresh_var_en, state);
> >>      default:
> >>              return -EINVAL;
> >>      }
> >>
> >
> Hi Julien,
> Sorry for the delay.
> "int_thresh_var_en" corresponds to APDS9306_INT_CFG_REG bit 3 (Datasheet: INT_CFG, Address: 0x19) which
> is a single bit value only. If user does "echo 4 > /sys/bus/iio/devices/iio:device0/events/thresh_adaptive_either_en",
> which trickles down to the "state" variable, do we really want to write any other value except "0" or "1"?
> Correct me if I am wrong here.

Hi Subhajit,
In drivers/iio/industrialio-event.c, iio_ev_state_store is actually
using kstrtobool to check user input, then gives the converted boolean
value to write_event_config.
So state is a boolean. By the way the purpose of this series is to
clean up code and use a bool instead of int for the state parameter.

So new code is equivalent to what was there before.
Cheers
Julien


> Regards,
> Subhajit Ghosh