[PATCH v2 1/4] arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label

[Wadim Egorov]

Am 29.05.24 um 00:51 schrieb Nathan Morrisson:
> Label the spi nor as serial_flash. This allows us to disable the
> flash with an overlay common to all am6xx-phycore-som boards.
> 
> Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>

For all 3 patches,

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
> v2: No change
> 
>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> index 125e507966fb..ca0bbf21f7fe 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> @@ -296,7 +296,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>   
> -	flash at 0 {
> +	serial_flash: flash at 0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;