[PATCH v6 4/6] arm64: dts: mediatek: mt8186: add default thermal zones

[AngeloGioacchino Del Regno]

Il 29/05/24 11:12, Julien Panis ha scritto:
> On 5/29/24 10:33, Chen-Yu Tsai wrote:
>> On Wed, May 29, 2024 at 4:17 PM AngeloGioacchino Del Regno
>> <angelogioacchino.delregno at collabora.com> wrote:
>>> Il 29/05/24 07:57, Julien Panis ha scritto:
>>>> From: Nicolas Pitre <npitre at baylibre.com>
>>>>
>>>> Inspired by the vendor kernel but adapted to the upstream thermal
>>>> driver version.
>>>>
>>>> Signed-off-by: Nicolas Pitre <npitre at baylibre.com>
>>>> Signed-off-by: Julien Panis <jpanis at baylibre.com>
>>> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> I'm getting some crazy readings which would cause the machine to
>> immediately shutdown during boot. Anyone else see this? Or maybe
>> my device has bad calibration data?
>>
>> gpu_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       +229.7 C
>>
>> nna_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       +229.7 C
>>
>> cpu_big0_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:         -7.2 C
>>
>> cpu_little2_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       +157.2 C
>>
>> cpu_little0_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       -277.1 C
>>
>> adsp_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       +229.7 C
>>
>> cpu_big1_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       +229.7 C
>>
>> cam_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:        +45.4 C
>>
>> cpu_little1_thermal-virtual-0
>> Adapter: Virtual device
>> temp1:       -241.8 C
> 
> It's likely that your device has bad calibration data indeed. We observed the same
> behavior on the mt8186 device we used (a Corsola) and finally realized that the
> golden temperature was 0 (device not properly calibrated).
> 
> To make a comparison, we run chromiumos v5.15 and dmesg output was:
> 'This sample is not calibrated, fake !!'
> Additional debugging revealed that the golden temp was actually 0. As a result,
> chromiumos v5.15 does not use the calibration data. It uses some default values
> instead. That's why you can observe good temperatures with chromiumos v5.15
> even with a device that is not calibrated.
> 
> This feature is not implemented in the driver upstream, so you need a device
> properly calibrated to get good temperatures with it. When we forced this
> driver using the default values used by chromiumos v5.15 instead of real calib
> data (temporarily, just for testing), the temperatures were good.
> 
> Please make sure your device is properly calibrated: 0 < golden temp < 62.
> 

Wait wait wait wait.

What's up with that calibration data stuff?

If there's any device that cannot use the calibration data, we need a way to
recognize whether the provided data (read from efuse, of course) is valid,
otherwise we're creating an important regression here.

"This device is unlucky" is not a good reason to have this kind of regression.

Since - as far as I understand - downstream can recognize that, upstream should
do the same.
I'd be okay with refusing to even probe this driver on such devices for the
moment being, as those are things that could be eventually handled on a second
part series, even though I would prefer a kind of on-the-fly calibration or
anyway something that would still make the unlucky ones to actually have good
readings *right now*.

Though, the fact that you assert that you observed this behavior on one of your
devices and *still decided to send that upstream* is, in my opinion, unacceptable.

Regards,
Angelo