[PATCH v6 3/8] soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation

Tue May 28 08:52:24 PDT 2024

Hi Angelo,

On Tue, 2024-05-28 at 12:24 +0200, AngeloGioacchino Del Regno wrote:
> Il 26/05/24 01:08, Jason-JH.Lin ha scritto:
> > Add cmdq_pkt_logic_command to support math operation.
> > 
> > cmdq_pkt_logic_command can append logic command to the CMDQ packet,
> > ask GCE to execute a arithmetic calculate instruction,
> > such as add, subtract, multiply, AND, OR and NOT, etc.
> > 
> > Note that all arithmetic instructions are unsigned calculations.
> > If there are any overflows, GCE will sent the invalid IRQ to notify
> > CMDQ driver.
> > 
> > Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> > Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> > ---
> >   drivers/soc/mediatek/mtk-cmdq-helper.c | 36
> > ++++++++++++++++++++++
> >   include/linux/soc/mediatek/mtk-cmdq.h  | 42
> > ++++++++++++++++++++++++++
> >   2 files changed, 78 insertions(+)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 046522664dc1..42fae05f61a8 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -15,10 +15,19 @@
> >   /* dedicate the last GPR_R15 to assign the register address to be
> > poll */
> >   #define CMDQ_POLL_ADDR_GPR	(15)
> >   #define CMDQ_EOC_IRQ_EN		BIT(0)
> > +#define CMDQ_IMMEDIATE_VALUE	0
> >   #define CMDQ_REG_TYPE		1
> >   #define CMDQ_JUMP_RELATIVE	0
> >   #define CMDQ_JUMP_ABSOLUTE	1
> >   
> > +#define CMDQ_OPERAND_GET_IDX_VALUE(operand) \
> > +	({ \
> > +		struct cmdq_operand *op = operand; \
> > +		op->reg ? op->idx : op->value; \
> > +	})
> 
> I think this CMDQ_OPERAND_GET_IDX_VALUE would be better expressed as
> a (inline?)
> function instead...
> 

Yes, I can change them to static inline function to pass their type
directly.

> static inline u16 cmdq_operand_get_idx_value(struct cmdq_operand *op)
> {
> 	return op->reg ? op->idx : op->value;
> }
> 
> and maybe the same for the other definition too..
> 
> static inline u16 cmdq_operand_type(struct cmdq_operand *op)
> {
> 	return op->reg ? CMDQ_REG_TYPE : CMDQ_IMMEDIATE_VALUE;
> }
> 
> but definitely the first one is what I don't like much, the second
> one can pass.
> 

You mean '#define CMDQ_OPERAND_GET_IDX_VALUE()' is the first one or
'static inline u16 cmdq_operand_get_idx_value()' is the first one?

Regards,
Jason-JH.Lin

> Cheers,
> Angelo
> 
> > +#define CMDQ_OPERAND_TYPE(operand) \
> > +	((operand)->reg ? CMDQ_REG_TYPE : CMDQ_IMMEDIATE_VALUE)
> > +
> >   struct cmdq_instruction {
> >   	union {
> >   		u32 value;
> > @@ -461,6 +470,33 @@ int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt,
> > dma_addr_t addr, u32 value, u32 mas
> >   }
> >   EXPORT_SYMBOL(cmdq_pkt_poll_addr);
> >   
> > +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16
> > result_reg_idx,
> > +			   struct cmdq_operand *left_operand,
> > +			   enum cmdq_logic_op s_op,
> > +			   struct cmdq_operand *right_operand)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> > +	u32 left_idx_value;
> > +	u32 right_idx_value;
> > +
> > +	if (!left_operand || !right_operand || s_op >= CMDQ_LOGIC_MAX)
> > +		return -EINVAL;
> > +
> > +	left_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(left_operand);
> > +	right_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(right_operand);
> > +	inst.op = CMDQ_CODE_LOGIC;
> > +	inst.dst_t = CMDQ_REG_TYPE;
> > +	inst.src_t = CMDQ_OPERAND_TYPE(left_operand);
> > +	inst.arg_c_t = CMDQ_OPERAND_TYPE(right_operand);
> > +	inst.sop = s_op;
> > +	inst.reg_dst = result_reg_idx;
> > +	inst.src_reg = left_idx_value;
> > +	inst.arg_c = right_idx_value;
> > +
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_logic_command);
> > +
> >   int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
> >   {
> >   	struct cmdq_instruction inst = {};
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> > b/include/linux/soc/mediatek/mtk-cmdq.h
> > index d4a8e34505e6..5bee6f7fc400 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -25,6 +25,31 @@
> >   
> >   struct cmdq_pkt;
> >   
> > +enum cmdq_logic_op {
> > +	CMDQ_LOGIC_ASSIGN = 0,
> > +	CMDQ_LOGIC_ADD = 1,
> > +	CMDQ_LOGIC_SUBTRACT = 2,
> > +	CMDQ_LOGIC_MULTIPLY = 3,
> > +	CMDQ_LOGIC_XOR = 8,
> > +	CMDQ_LOGIC_NOT = 9,
> > +	CMDQ_LOGIC_OR = 10,
> > +	CMDQ_LOGIC_AND = 11,
> > +	CMDQ_LOGIC_LEFT_SHIFT = 12,
> > +	CMDQ_LOGIC_RIGHT_SHIFT = 13,
> > +	CMDQ_LOGIC_MAX,
> > +};
> > +
> > +struct cmdq_operand {
> > +	/* register type */
> > +	bool reg;
> > +	union {
> > +		/* index */
> > +		u16 idx;
> > +		/* value */
> > +		u16 value;
> > +	};
> > +};
> > +
> >   struct cmdq_client_reg {
> >   	u8 subsys;
> >   	u16 offset;
> > @@ -272,6 +297,23 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8
> > subsys,
> >   int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
> >   		       u16 offset, u32 value, u32 mask);
> >   
> > +/**
> > + * cmdq_pkt_logic_command() - Append logic command to the CMDQ
> > packet, ask GCE to
> > + *		          execute an instruction that store the result
> > of logic operation
> > + *		          with left and right operand into
> > result_reg_idx.
> > + * @pkt:		the CMDQ packet
> > + * @result_reg_idx:	SPR index that store operation result
> > of left_operand and right_operand
> > + * @left_operand:	left operand
> > + * @s_op:		the logic operator enum
> > + * @right_operand:	right operand
> > + *
> > + * Return: 0 for success; else the error code is returned
> > + */
> > +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16
> > result_reg_idx,
> > +			   struct cmdq_operand *left_operand,
> > +			   enum cmdq_logic_op s_op,
> > +			   struct cmdq_operand *right_operand);
> > +
> >   /**
> >    * cmdq_pkt_assign() - Append logic assign command to the CMDQ
> > packet, ask GCE
> >    *		       to execute an instruction that set a
> > constant value into
> 
> 
> 
> 