[PATCH 3/3] pinctrl: rockchip: add rk3308b SoC support

[Heiko Stübner]

Am Freitag, 17. Mai 2024, 08:58:32 CEST schrieb Luca Ceresoli:
> Hello Dmitry,
> 
> On Thu, 16 May 2024 17:06:46 +0500
> Dmitry Yashin <dmt.yashin at gmail.com> wrote:
> 
> > Hi Luca,
> > 
> > On 15.05.24 21:29, Luca Ceresoli wrote:
> > > I'm skeptical about this being bound to a new DT compatible. As far as I
> > > know the RK3308 and RK3308B are mostly equivalent, so it looks as the
> > > pinctrl implementation could be detected at runtime. This would let
> > > products to be built with either chip version and work on any without
> > > any DT change.  
> > 
> > 
> > Thanks for your feedback.
> > 
> > Indeed, these SoC's have a lot in common, but as I can see the rk3308b
> > has more blocks, like extra PWM's (rk3308 datasheet 1.5 [0] shows only
> > 1x PWM 4ch, when rk3308b and rk3308b-s have 3x PWM 4ch), 1-wire and
> > CAN controller (mentioned in the TRM, but dropped from rk3308b
> > datasheet for some reason).
> > 
> > So, in my view, it really makes sense to add rk3308b.dtsi, where extra
> > PWM's, pinctrl compatible and its pin functions can be moved. And if
> > its not worth it, then I will try to adapt the entire series to runtime
> > config based on cpuid like you suggested.
> 
> Having a rk3308b.dtsi would probably make sense, yes, as there are
> several differences as you described. However for the pinctrl it seems
> probably not necessary.
> 
> I've seen actual products being manufactured with two different RK3308
> variants in different lots of production, but with the same DT that has
> rockchip,rk3308-pinctrl in it. Those would need a _selective_ DT
> upgrade in order to benefit from your changes.
> 
> And even if a product had always used the B variant, it would need DT
> upgrade when upgrading to a kernel with your changes. Otherwise with
> patch 1/3 of this series the pictrl driver would lose many routes after
> upgrading the kernel (but not the DT): can this lead to
> previously-working devices to stop working? I think this is a
> fundamental question to reply.

If things can be runtime-detectable, they should be detected at runtime.
So yes, while we need to know that it is a rk3308-something before
via the dt, if we can distinguish between the rk3308 variants at runtime
we should definitly do so.

Heiko