[PATCH v15 16/29] drm/tests: Add HDMI connector bpc and format tests
Maxime Ripard
mripard at kernel.org
Mon May 27 06:58:05 PDT 2024
The previous patch added the bpc and format an HDMI connector needs to
be set up with for a given connector state.
Let's add a few tests to make sure it works as expected.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Maxime Ripard <mripard at kernel.org>
---
drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 509 +++++++++++++++++++++
drivers/gpu/drm/tests/drm_kunit_edid.h | 160 +++++++
2 files changed, 669 insertions(+)
diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
index a49a544d7b49..968204781928 100644
--- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
@@ -15,10 +15,11 @@
#include <drm/drm_managed.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_hdmi_helper.h>
#include <drm/display/drm_hdmi_state_helper.h>
#include "../drm_crtc_internal.h"
#include <kunit/test.h>
@@ -370,10 +371,60 @@ static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
}
+/*
+ * Test that if we have an HDMI connector but a !HDMI display, we always
+ * output RGB with 8 bpc.
+ */
+static void drm_test_check_output_bpc_dvi(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_dvi_1080p,
+ ARRAY_SIZE(test_edid_dvi_1080p));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_FALSE(test, info->is_hdmi);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
/*
* Test that when doing a commit which would use RGB 8bpc, the TMDS
* clock rate stored in the connector state is equal to the mode clock
*/
static void drm_test_check_tmds_char_rate_rgb_8bpc(struct kunit *test)
@@ -562,14 +613,472 @@ static void drm_test_check_hdmi_funcs_reject_rate(struct kunit *test)
ret = drm_atomic_check_only(state);
KUNIT_EXPECT_LT(test, ret, 0);
}
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting RGB only
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in RGB/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in RGB/10bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to 1.25 times the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_bpc_fallback(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate, preferred->clock * 1250);
+}
+
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting both RGB and YUV422 and up to
+ * 12 bpc
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in RGB/12bpc but lower than the display supports in
+ * RGB/10bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in YUV422/12bpc.
+ *
+ * Then we will prefer to keep the RGB format with a lower bpc over
+ * picking YUV422.
+ */
+static void drm_test_check_max_tmds_rate_format_fallback(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver and screen supports RGB and YUV formats, and we
+ * try to set the VIC 1 mode, we end up with 8bpc RGB even if we could
+ * have had a higher bpc.
+ */
+static void drm_test_check_output_bpc_format_vic_1(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *mode;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ drm = &priv->drm;
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ mode = drm_display_mode_from_cea_vic(drm, 1);
+ KUNIT_ASSERT_NOT_NULL(test, mode);
+
+ /*
+ * NOTE: We can't use drm_hdmi_compute_mode_clock()
+ * here because we're trying to get the rate of an invalid
+ * configuration.
+ *
+ * Thus, we have to calculate the rate by hand.
+ */
+ rate = mode->clock * 1500;
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports only RGB but the screen also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_driver_rgb_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that YUV422 would be the preferred option
+ * here: we're always favouring higher bpc, we can't have RGB
+ * because the TMDS character rate exceeds the maximum supported
+ * by the display, and YUV422 works for that display.
+ *
+ * But since the driver only supports RGB, we should fallback to
+ * a lower bpc with RGB.
+ */
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a screen supports only RGB but the driver also supports
+ * YUV formats, we only end up with an RGB format.
+ */
+static void drm_test_check_output_bpc_format_display_rgb_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_200mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that YUV422 would be the preferred option
+ * here: we're always favouring higher bpc, we can't have RGB
+ * because the TMDS character rate exceeds the maximum supported
+ * by the display, and YUV422 works for that display.
+ *
+ * But since the display only supports RGB, we should fallback to
+ * a lower bpc with RGB.
+ */
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_YUV422);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_LT(test, conn_state->hdmi.output_bpc, 12);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a display supports higher bpc but the driver only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_driver_8bpc_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB),
+ 8);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_yuv_dc_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that we have headroom on the TMDS character
+ * clock to actually use 12bpc.
+ */
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
+/*
+ * Test that if a driver supports higher bpc but the display only
+ * supports 8 bpc, we only end up with 8 bpc even if we could have had a
+ * higher bpc.
+ */
+static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx *ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_atomic_helper_connector_hdmi_init(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV422) |
+ BIT(HDMI_COLORSPACE_YUV444),
+ 12);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ conn = &priv->connector;
+ ret = set_connector_edid(test, conn,
+ test_edid_hdmi_1080p_rgb_max_340mhz,
+ ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_340mhz));
+ KUNIT_ASSERT_EQ(test, ret, 0);
+
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+
+ ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+ /*
+ * We're making sure that we have headroom on the TMDS character
+ * clock to actually use 12bpc.
+ */
+ rate = drm_hdmi_compute_mode_clock(preferred, 12, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
+}
+
static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+ KUNIT_CASE(drm_test_check_output_bpc_dvi),
+ KUNIT_CASE(drm_test_check_output_bpc_format_vic_1),
+ KUNIT_CASE(drm_test_check_output_bpc_format_display_8bpc_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_display_rgb_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_driver_8bpc_only),
+ KUNIT_CASE(drm_test_check_output_bpc_format_driver_rgb_only),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_8bpc),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_10bpc),
KUNIT_CASE(drm_test_check_tmds_char_rate_rgb_12bpc),
/*
* TODO: We should have tests to check that a change in the
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
index ed051d356d5e..cda410440aca 100644
--- a/drivers/gpu/drm/tests/drm_kunit_edid.h
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -1,8 +1,66 @@
#ifndef DRM_KUNIT_EDID_H_
#define DRM_KUNIT_EDID_H_
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 0a 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * RGB color display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II: none
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Checksum: 0xab
+ */
+static const unsigned char test_edid_dvi_1080p[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x1e, 0x46, 0x0f, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xab
+};
+
/*
* edid-decode (hex):
*
* 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
* 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
@@ -101,10 +159,112 @@ static const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0xd0
};
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
+ *
+ * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
+ * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ * EDID Structure Version & Revision: 1.3
+ * Vendor & Product Identification:
+ * Manufacturer: LNX
+ * Model: 42
+ * Made in: 2023
+ * Basic Display Parameters & Features:
+ * Digital display
+ * DFP 1.x compatible TMDS
+ * Maximum image size: 160 cm x 90 cm
+ * Gamma: 2.20
+ * Monochrome or grayscale display
+ * First detailed timing is the preferred timing
+ * Color Characteristics:
+ * Red : 0.0000, 0.0000
+ * Green: 0.0000, 0.0000
+ * Blue : 0.0000, 0.0000
+ * White: 0.0000, 0.0000
+ * Established Timings I & II:
+ * DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
+ * Standard Timings: none
+ * Detailed Timing Descriptors:
+ * DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1600 mm x 900 mm)
+ * Hfront 88 Hsync 44 Hback 148 Hpol P
+ * Vfront 4 Vsync 5 Vback 36 Vpol P
+ * Display Product Name: 'Test EDID'
+ * Display Range Limits:
+ * Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ * Dummy Descriptor:
+ * Extension blocks: 1
+ * Checksum: 0x92
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ * Revision: 3
+ * Underscans IT Video Formats by default
+ * Native detailed modes: 1
+ * Colorimetry Data Block:
+ * sRGB
+ * Video Data Block:
+ * VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
+ * Video Capability Data Block:
+ * YCbCr quantization: No Data
+ * RGB quantization: Selectable (via AVI Q)
+ * PT scan behavior: No Data
+ * IT scan behavior: Always Underscanned
+ * CE scan behavior: Always Underscanned
+ * Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ * Source physical address: 1.2.3.4
+ * Maximum TMDS clock: 340 MHz
+ * Extended HDMI video details:
+ * Checksum: 0xd0 Unused space in Extension Block: 100 bytes
+ */
+static const unsigned char test_edid_hdmi_1080p_rgb_max_340mhz[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+ 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+ 0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+ 0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+ 0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+ 0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
+ 0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
+ 0x00, 0x12, 0x34, 0x00, 0x44, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xd0
+};
+
/*
* edid-decode (hex):
*
* 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
* 00 21 01 03 81 a0 5a 78 1a 00 00 00 00 00 00 00
--
2.45.0
More information about the linux-arm-kernel
mailing list