[PATCH RESEND, v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver

[CK Hu (胡俊光)]

Hi, Jason:

On Sun, 2024-05-26 at 22:44 +0800, Jason-JH.Lin wrote:
> To support secure video path feature, GCE have to read/write registgers
> in the secure world. GCE will enable the secure access permission to the
> HW who wants to access the secure content buffer.
> 
> Add CMDQ secure mailbox driver to make CMDQ client user is able to
> sending their HW settings to the secure world. So that GCE can execute
> all instructions to configure HW in the secure world.
> 
> TODO:
> 1. Squash cmdq_sec_task_exec_work() into cmdq_sec_mbox_send_data().
> 2. Call into TEE to query cookie instead of using shared memory in
>    cmdq_sec_get_cookie().
> 3. Register shared memory as command buffer instead of copying normal
>    command buffer to IWC shared memory.
> 4. Use SOFTDEP to make cmdq_sec_probe later than OPTEE loaded and then
>    move cmdq_sec_session_init into cmdq_sec_probe().
> 5. Remove timeout detection in cmdq_sec_session_send().
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---

[snip]

> +/*
> + * enum cmdq_sec_engine_enum - the flag for HW engines need to be proteced in secure world.
> + * Each enum is a bit in a u64 engine flag variable.
> + */
> +enum cmdq_sec_engine_enum {
> +	/* MDP */
> +	CMDQ_SEC_MDP_RDMA0		= 0,
> +	CMDQ_SEC_MDP_RDMA1		= 1,
> +	CMDQ_SEC_MDP_WDMA		= 2,
> +	CMDQ_SEC_MDP_RDMA2		= 3,
> +	CMDQ_SEC_MDP_RDMA3		= 4,
> +	CMDQ_SEC_MDP_WROT0		= 5,
> +	CMDQ_SEC_MDP_WROT1		= 6,
> +	CMDQ_SEC_MDP_WROT2		= 7,
> +	CMDQ_SEC_MDP_WROT3		= 8,
> +	CMDQ_SEC_MDP_HDR0		= 9,
> +	CMDQ_SEC_MDP_HDR1		= 10,
> +	CMDQ_SEC_MDP_HDR2		= 11,
> +	CMDQ_SEC_MDP_HDR3		= 12,
> +	CMDQ_SEC_MDP_AAL0		= 13,
> +	CMDQ_SEC_MDP_AAL1		= 14,
> +	CMDQ_SEC_MDP_AAL2		= 15,
> +	CMDQ_SEC_MDP_AAL3		= 16,
> +
> +	/* DISP (VDOSYS0) */
> +	CMDQ_SEC_DISP_RDMA0		= 17,
> +	CMDQ_SEC_DISP_RDMA1		= 18,
> +	CMDQ_SEC_DISP_WDMA0		= 19,
> +	CMDQ_SEC_DISP_WDMA1		= 20,
> +	CMDQ_SEC_DISP_OVL0		= 21,
> +	CMDQ_SEC_DISP_OVL1		= 22,
> +	CMDQ_SEC_DISP_OVL2		= 23,
> +	CMDQ_SEC_DISP_2L_OVL0		= 24,
> +	CMDQ_SEC_DISP_2L_OVL1		= 25,
> +	CMDQ_SEC_DISP_2L_OVL2		= 26,
> +
> +	/* DSIP (VDOSYS1) */
> +	CMDQ_SEC_VDO1_DISP_RDMA_L0	= 27,
> +	CMDQ_SEC_VDO1_DISP_RDMA_L1	= 28,
> +	CMDQ_SEC_VDO1_DISP_RDMA_L2	= 29,
> +	CMDQ_SEC_VDO1_DISP_RDMA_L3	= 30,
> +
> +	/* VENC */
> +	CMDQ_SEC_VENC_BSDMA		= 31,
> +	CMDQ_SEC_VENC_CUR_LUMA		= 32,
> +	CMDQ_SEC_VENC_CUR_CHROMA	= 33,
> +	CMDQ_SEC_VENC_REF_LUMA		= 34,
> +	CMDQ_SEC_VENC_REF_CHROMA	= 35,
> +	CMDQ_SEC_VENC_REC		= 36,
> +	CMDQ_SEC_VENC_SUB_R_LUMA	= 37,
> +	CMDQ_SEC_VENC_SUB_W_LUMA	= 38,
> +	CMDQ_SEC_VENC_SV_COMV		= 39,
> +	CMDQ_SEC_VENC_RD_COMV		= 40,
> +	CMDQ_SEC_VENC_NBM_RDMA		= 41,
> +	CMDQ_SEC_VENC_NBM_WDMA		= 42,
> +	CMDQ_SEC_VENC_NBM_RDMA_LITE	= 43,
> +	CMDQ_SEC_VENC_NBM_WDMA_LITE	= 44,
> +	CMDQ_SEC_VENC_FCS_NBM_RDMA	= 45,
> +	CMDQ_SEC_VENC_FCS_NBM_WDMA	= 46,
> +
> +	CMDQ_SEC_MAX_ENG_COUNT
> +};

Useless, so drop these.

Regards,
CK

> +