[PATCH v6 7/8] mailbox: mediatek: Add secure CMDQ driver support for CMDQ driver
Jason-JH.Lin
jason-jh.lin at mediatek.com
Sat May 25 16:08:09 PDT 2024
CMDQ driver will probe a secure CMDQ driver when has_sec flag
in platform data is true and its device node in dts has defined a
event id of CMDQ_SYNC_TOKEN_SEC_EOF.
Secure CMDQ driver support on mt8188 and mt8195 currently.
So add a has_secure flag to their driver data to probe it.
Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 76 ++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 025e53549a45..5c606684b07b 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -15,6 +15,7 @@
#include <linux/pm_runtime.h>
#include <linux/mailbox_controller.h>
#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/mailbox/mtk-cmdq-sec-mailbox.h>
#include <linux/of.h>
#define CMDQ_MBOX_AUTOSUSPEND_DELAY_MS 100
@@ -55,11 +56,22 @@
#define CMDQ_JUMP_BY_OFFSET 0x10000000
#define CMDQ_JUMP_BY_PA 0x10000001
+#define CMDQ_THR_IDX(thread, cmdq) (((thread)->base - (cmdq)->base - CMDQ_THR_BASE) \
+ / CMDQ_THR_SIZE)
+
+#define CMDQ_IS_SECURE_THREAD(idx, cmdq) ((cmdq)->pdata->has_secure && \
+ (idx) >= (cmdq)->pdata->secure_thread_min && \
+ (idx) < (cmdq)->pdata->secure_thread_min + \
+ (cmdq)->pdata->secure_thread_nr)
+
struct gce_plat {
u32 thread_nr;
u8 shift;
bool control_by_sw;
bool sw_ddr_en;
+ bool has_secure;
+ u32 secure_thread_nr;
+ u32 secure_thread_min;
u32 gce_num;
};
@@ -368,6 +380,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
struct cmdq_task *task;
unsigned long curr_pa, end_pa;
+ u32 idx = CMDQ_THR_IDX(thread, cmdq);
int ret;
/* Client should not flush new tasks if suspended. */
@@ -377,6 +390,13 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
if (ret < 0)
return ret;
+ if (CMDQ_IS_SECURE_THREAD(idx, cmdq)) {
+ ret = cmdq_sec_mbox.ops->send_data(chan, data);
+ pm_runtime_mark_last_busy(cmdq->mbox.dev);
+ pm_runtime_put_autosuspend(cmdq->mbox.dev);
+ return ret;
+ }
+
task = kzalloc(sizeof(*task), GFP_ATOMIC);
if (!task) {
pm_runtime_put_autosuspend(cmdq->mbox.dev);
@@ -436,6 +456,13 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
static int cmdq_mbox_startup(struct mbox_chan *chan)
{
+ struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
+ struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv;
+ u32 idx = CMDQ_THR_IDX(thread, cmdq);
+
+ if (CMDQ_IS_SECURE_THREAD(idx, cmdq))
+ cmdq_sec_mbox.ops->startup(chan);
+
return 0;
}
@@ -445,9 +472,17 @@ static void cmdq_mbox_shutdown(struct mbox_chan *chan)
struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev);
struct cmdq_task *task, *tmp;
unsigned long flags;
+ u32 idx = CMDQ_THR_IDX(thread, cmdq);
WARN_ON(pm_runtime_get_sync(cmdq->mbox.dev) < 0);
+ if (CMDQ_IS_SECURE_THREAD(idx, cmdq)) {
+ cmdq_sec_mbox.ops->shutdown(chan);
+ pm_runtime_mark_last_busy(cmdq->mbox.dev);
+ pm_runtime_put_autosuspend(cmdq->mbox.dev);
+ return;
+ }
+
spin_lock_irqsave(&thread->chan->lock, flags);
if (list_empty(&thread->task_busy_list))
goto done;
@@ -488,12 +523,20 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
struct cmdq_task *task, *tmp;
unsigned long flags;
u32 enable;
+ u32 idx = CMDQ_THR_IDX(thread, cmdq);
int ret;
ret = pm_runtime_get_sync(cmdq->mbox.dev);
if (ret < 0)
return ret;
+ if (CMDQ_IS_SECURE_THREAD(idx, cmdq)) {
+ cmdq_sec_mbox.ops->flush(chan, timeout);
+ pm_runtime_mark_last_busy(cmdq->mbox.dev);
+ pm_runtime_put_autosuspend(cmdq->mbox.dev);
+ return 0;
+ }
+
spin_lock_irqsave(&thread->chan->lock, flags);
if (list_empty(&thread->task_busy_list))
goto out;
@@ -569,6 +612,7 @@ static int cmdq_probe(struct platform_device *pdev)
int alias_id = 0;
static const char * const clk_name = "gce";
static const char * const clk_names[] = { "gce0", "gce1" };
+ u32 hwid = 0;
cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL);
if (!cmdq)
@@ -594,6 +638,8 @@ static int cmdq_probe(struct platform_device *pdev)
dev, cmdq->base, cmdq->irq);
if (cmdq->pdata->gce_num > 1) {
+ hwid = of_alias_get_id(dev->of_node, clk_name);
+
for_each_child_of_node(phandle->parent, node) {
alias_id = of_alias_get_id(node, clk_name);
if (alias_id >= 0 && alias_id < cmdq->pdata->gce_num) {
@@ -643,6 +689,30 @@ static int cmdq_probe(struct platform_device *pdev)
cmdq->mbox.chans[i].con_priv = (void *)&cmdq->thread[i];
}
+ if (cmdq->pdata->has_secure) {
+ struct platform_device *cmdq_sec;
+ static struct gce_sec_plat sec_plat = {0};
+
+ if (of_property_read_u32_index(dev->of_node, "mediatek,gce-events", 0,
+ &sec_plat.cmdq_event) == 0) {
+ sec_plat.mbox = &cmdq->mbox;
+ sec_plat.base = cmdq->base;
+ sec_plat.hwid = hwid;
+ sec_plat.secure_thread_nr = cmdq->pdata->secure_thread_nr;
+ sec_plat.secure_thread_min = cmdq->pdata->secure_thread_min;
+ sec_plat.shift = cmdq->pdata->shift;
+
+ cmdq_sec = platform_device_register_data(dev, "mtk-cmdq-sec",
+ PLATFORM_DEVID_AUTO,
+ &sec_plat,
+ sizeof(sec_plat));
+ if (IS_ERR(cmdq_sec)) {
+ dev_err(dev, "failed to register platform_device mtk-cmdq-sec\n");
+ return PTR_ERR(cmdq_sec);
+ }
+ }
+ }
+
err = devm_mbox_controller_register(dev, &cmdq->mbox);
if (err < 0) {
dev_err(dev, "failed to register mailbox: %d\n", err);
@@ -719,6 +789,9 @@ static const struct gce_plat gce_plat_mt8188 = {
.thread_nr = 32,
.shift = 3,
.control_by_sw = true,
+ .has_secure = true,
+ .secure_thread_nr = 2,
+ .secure_thread_min = 8,
.gce_num = 2
};
@@ -733,6 +806,9 @@ static const struct gce_plat gce_plat_mt8195 = {
.thread_nr = 24,
.shift = 3,
.control_by_sw = true,
+ .has_secure = true,
+ .secure_thread_nr = 2,
+ .secure_thread_min = 8,
.gce_num = 2
};
--
2.18.0
More information about the linux-arm-kernel
mailing list