[PATCH v3 1/3] arm64: dts: ti: k3-j784s4-main: Add PCIe nodes

[Siddharth Vadapalli]

TI's J784S4 SoC has four instances of Gen3 PCIe Controllers namely
PCIe0, PCIe1, PCIe2 and PCIe3. PCIe0 and PCIe1 are 4-Lane controllers
while PCIe2 and PCIe3 are 2-Lane controllers.

Add support for the Root Complex Mode of operation of these PCIe instances.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 136 +++++++++++++++++++++
 1 file changed, 136 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 6a4554c6c9c1..7f89f8dc24df 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,26 @@ scm_conf: bus at 100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie0_ctrl: pcie0-ctrl at 4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
+		pcie1_ctrl: pcie1-ctrl at 4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
+		pcie2_ctrl: pcie2-ctrl at 4078 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4078 0x4>;
+		};
+
+		pcie3_ctrl: pcie3-ctrl at 407c {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x407c 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller at 4080 {
 			compatible = "reg-mux";
 			reg = <0x00004080 0x30>;
@@ -907,6 +927,122 @@ main_sdhci1: mmc at 4fb0000 {
 		status = "disabled";
 	};
 
+	pcie0_rc: pcie at 2900000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 332 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie at 2910000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 333 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie2_rc: pcie at 2920000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 334 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie3_rc: pcie at 2930000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 335 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
 	serdes_wiz0: wiz at 5060000 {
 		compatible = "ti,j784s4-wiz-10g";
 		#address-cells = <1>;
-- 
2.40.1