[PATCH 5/7] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source

[Markus Schneider-Pargmann]

mcu_mcan0 and mcu_mcan1 can be wakeup sources for the SoC. Mark them
accordingly in the devicetree.

Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index e66d486ef1f2..56a40b641667 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -159,6 +159,7 @@ mcu_mcan0: can at 4e08000 {
 		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		wakeup-source;
 		status = "disabled";
 	};
 
@@ -171,6 +172,7 @@ mcu_mcan1: can at 4e18000 {
 		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		wakeup-source;
 		status = "disabled";
 	};
 };
-- 
2.43.0