[PATCH v9 0/3] Add support for Allwinner PWM on D1/T113s/R329 SoCs

[John Watts]

On Thu, May 23, 2024 at 11:26:07AM +0900, きくちゃんさん wrote:
> Hello Aleksandr,
> 
> I had coincidentally developed a PWM driver for the device.
> Based on my experience, I find that dynamically changing the coupled
> DIV_M value is quite complex.
> The current approach has limitations, especially with resolution
> changes, which can be unpredictable for users. For example:
> 
>   1. Enabling channel A automatically selects DIV_M.
>   2. Enabling coupled channel B with a specific period may result in
> poor resolution for channel B, as the DIV_M value depends on the
> period of channel A.
>   3. If channel B is enabled first, channel A may not be enabled if
> its period doesn't fit the DIV_M range selected by channel B.
> 
> Additionally, using APB as a clock source for the channels would
> further complicate the process.
> 
> To simplify this, I suggest (maybe for the future) specifying these
> values directly in the Device Tree like this:
> ```
> allwinner,pwm-coupled-channel-clock-sources="hosc", "apb", "hosc";
> allwinner,pwm-coupled-channel-clock-prescales=<0>, <3>, <8>;
> ```
> This would delegate the complexity to the DT, making the resolution
> predictable for users.
> As a bonus, it introduces a way to select clock sources for each
> coupled channels.
> 
> For the meantime, I think it is enough to use fixed "hosc" and <0> for
> regular use.
> 
> Looking forward to your thoughts.
> 
> Best regards,
> kikuchan.

I have a somewhat opposite opinion. I've developed a driver too and posted it
on the u-boot mailing list that is deterministic and handles both channels:

https://lore.kernel.org/all/20240518-pwm_d1-v1-0-311fc5fe2248@jookia.org/

It does this by remembering the settings for channels and disabling then
setting both channels at once whenever there's an update.

I think this is a decent enough solution to the problem and just works
automatically without people having to micromanage the controller.

John.