[PATCH v4 2/5] clk: imx: clk-audiomix: Add reset controller
Shengjiu Wang
shengjiu.wang at gmail.com
Tue May 21 19:05:48 PDT 2024
On Mon, May 20, 2024 at 11:44 PM Frank Li <Frank.li at nxp.com> wrote:
>
> On Mon, May 20, 2024 at 03:09:20PM +0800, Shengjiu Wang wrote:
> > Audiomix block control can be a reset controller for
> > Enhanced Audio Return Channel (EARC), which is one of
> > modules in this audiomix subsystem.
> >
> > The reset controller is supported by the auxiliary device
> > framework.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > ---
> > drivers/clk/imx/Kconfig | 1 +
> > drivers/clk/imx/clk-imx8mp-audiomix.c | 61 +++++++++++++++++++++++++++
> > 2 files changed, 62 insertions(+)
> >
> > diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> > index 6da0fba68225..9edfb030bea9 100644
> > --- a/drivers/clk/imx/Kconfig
> > +++ b/drivers/clk/imx/Kconfig
> > @@ -81,6 +81,7 @@ config CLK_IMX8MP
> > tristate "IMX8MP CCM Clock Driver"
> > depends on ARCH_MXC || COMPILE_TEST
> > select MXC_CLK
> > + select AUXILIARY_BUS
> > help
> > Build the driver for i.MX8MP CCM Clock Driver
> >
> > diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > index b381d6f784c8..d2eaabe431cd 100644
> > --- a/drivers/clk/imx/clk-imx8mp-audiomix.c
> > +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > @@ -5,6 +5,7 @@
> > * Copyright (C) 2022 Marek Vasut <marex at denx.de>
> > */
> >
> > +#include <linux/auxiliary_bus.h>
> > #include <linux/clk-provider.h>
> > #include <linux/device.h>
> > #include <linux/io.h>
> > @@ -217,6 +218,62 @@ struct clk_imx8mp_audiomix_priv {
> > struct clk_hw_onecell_data clk_data;
> > };
> >
> > +#if IS_ENABLED(CONFIG_RESET_CONTROLLER)
> > +
> > +static void clk_imx8mp_audiomix_reset_unregister_adev(void *_adev)
> > +{
> > + struct auxiliary_device *adev = _adev;
> > +
> > + auxiliary_device_delete(adev);
> > + auxiliary_device_uninit(adev);
> > +}
> > +
> > +static void clk_imx8mp_audiomix_reset_adev_release(struct device *dev)
> > +{
> > + struct auxiliary_device *adev = to_auxiliary_dev(dev);
> > +
> > + kfree(adev);
> > +}
> > +
> > +static int clk_imx8mp_audiomix_reset_controller_register(struct device *dev,
> > + struct clk_imx8mp_audiomix_priv *priv)
> > +{
> > + struct auxiliary_device *adev;
> > + int ret;
> > +
> > + adev = kzalloc(sizeof(*adev), GFP_KERNEL);
>
>
> You may use scoped free
>
> struct auxiliary_device *adev __free(kfree) = kzalloc(sizeof(*adev), GFP_KERNEL);
Ok, will update the code
best regards
Shengjiu Wang
>
> > + if (!adev)
> > + return -ENOMEM;
> > +
> > + adev->name = "reset";
> > + adev->dev.parent = dev;
> > + adev->dev.release = clk_imx8mp_audiomix_reset_adev_release;
> > +
> > + ret = auxiliary_device_init(adev);
> > + if (ret) {
> > + kfree(adev);
> > + return ret;
> > + }
>
> if use scoped free,
>
> if (ret)
> return ret;
>
> > +
> > + ret = auxiliary_device_add(adev);
> > + if (ret) {
> > + auxiliary_device_uninit(adev);
> > + kfree(adev);
> > + return ret;
>
> the same here.
>
> > + }
> > +
> > + return devm_add_action_or_reset(dev, clk_imx8mp_audiomix_reset_unregister_adev, adev);
>
> if use scope free
> return devm_add_action_or_reset(dev, clk_imx8mp_audiomix_reset_unregister_adev, no_free_ptr(adev));
>
> > +}
> > +
> > +#else /* !CONFIG_RESET_CONTROLLER */
> > +
> > +static int clk_imx8mp_audiomix_reset_controller_register(struct clk_imx8mp_audiomix_priv *priv)
> > +{
> > + return 0;
> > +}
> > +
> > +#endif /* !CONFIG_RESET_CONTROLLER */
> > +
> > static void clk_imx8mp_audiomix_save_restore(struct device *dev, bool save)
> > {
> > struct clk_imx8mp_audiomix_priv *priv = dev_get_drvdata(dev);
> > @@ -337,6 +394,10 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
> > if (ret)
> > goto err_clk_register;
> >
> > + ret = clk_imx8mp_audiomix_reset_controller_register(dev, priv);
> > + if (ret)
> > + goto err_clk_register;
> > +
> > pm_runtime_put_sync(dev);
> > return 0;
> >
> > --
> > 2.34.1
> >
More information about the linux-arm-kernel
mailing list