[PATCH v4 01/10] dt-bindings: display: Add YAML schema for JH7110 display pipeline
Keith Zhao
keith.zhao at starfivetech.com
Tue May 21 02:50:11 PDT 2024
Hi Krzysztof:
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: 2024年5月21日 15:30
> To: Keith Zhao <keith.zhao at starfivetech.com>; andrzej.hajda at intel.com;
> neil.armstrong at linaro.org; rfoss at kernel.org;
> Laurent.pinchart at ideasonboard.com; jonas at kwiboo.se;
> jernej.skrabec at gmail.com; maarten.lankhorst at linux.intel.com;
> mripard at kernel.org; tzimmermann at suse.de; airlied at gmail.com;
> daniel at ffwll.ch; robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org;
> hjc at rock-chips.com; heiko at sntech.de; andy.yan at rock-chips.com; Xingyu Wu
> <xingyu.wu at starfivetech.com>; p.zabel at pengutronix.de; Jack Zhu
> <jack.zhu at starfivetech.com>; Shengyang Chen
> <shengyang.chen at starfivetech.com>
> Cc: dri-devel at lists.freedesktop.org; devicetree at vger.kernel.org;
> linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v4 01/10] dt-bindings: display: Add YAML schema for JH7110
> display pipeline
>
> On 21/05/2024 12:58, keith wrote:
> > JH7110 SoC display pipeline includes a display controller and hdmi.
> > Dc controller IP : Vivante DC8200 Dual Display HDMI IP : INNOSILICON
> > HDMI2.0
> >
> > As the INNO hdmi ip is also used by rockchip SoC in the driver code,
> > the innosilicon,inno-hdmi.yaml schema containing the common properties
> > for the INNO DesignWare HDMI TX controller isn't a full device tree
> > binding specification, but is meant to be referenced by
> > platform-specific bindings for the IP core.
> >
> > Signed-off-by: keith <keith.zhao at starfivetech.com>
> > ---
> > .../display/bridge/innosilicon,inno-hdmi.yaml | 49 +++++
> > .../display/rockchip/rockchip,inno-hdmi.yaml | 27 +--
> > .../starfive/starfive,dsi-encoder.yaml | 92 ++++++++++
> > .../starfive/starfive,jh7110-dc8200.yaml | 169 ++++++++++++++++++
> > .../starfive/starfive,jh7110-inno-hdmi.yaml | 75 ++++++++
> > .../soc/starfive/starfive,jh7110-syscon.yaml | 1 +
> > MAINTAINERS | 8 +
> > 7 files changed, 396 insertions(+), 25 deletions(-) create mode
> > 100644
> > Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi
> > .yaml create mode 100644
> > Documentation/devicetree/bindings/display/starfive/starfive,dsi-encode
> > r.yaml create mode 100644
> > Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8
> > 200.yaml create mode 100644
> > Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inn
> > o-hdmi.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hd
> > mi.yaml
> > b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hd
> > mi.yaml
> > new file mode 100644
> > index 000000000000..8540174dcaeb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/innosilicon,inn
> > +++ o-hdmi.yaml
> > @@ -0,0 +1,49 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/display/bridge/innosilicon,inno-hdmi.ya
> > +ml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Common Properties for Innosilicon HDMI TX IP
>
> Your patch is difficult to review. Split changing existing bindings (and defining
> common part) to a separate patch.
The background is that because the existing inno hdmi driver on the main line has some interfaces that can be public,
its yaml counterpart attempts to make a public reference file
>
> > +
> > +maintainers:
> > + - Keith Zhao <keith.zhao at starfivetech.com>
> > +
> > +description: |
> > + This document defines device tree properties for the Innosilicon
> > +HDMI TX
>
> Nothing improved here. Don't say obvious that this documents says something.
> It cannot do anything else.
>
> "Innosilicon HDMI TX is a foo bar device present on zap SoC ...."
>
>
> > + controller (INNO HDMI) IP core. It doesn't constitute a full device
> > + tree binding specification by itself but is meant to be referenced
> > + by device tree bindings for the platform-specific integrations of the INNO
> HDMI.
>
> I don't understand this at all. I don't know what is "full device tree binding
> specification".
>
> > +
> > + When referenced from platform device tree bindings the properties
> > + defined in this document are defined as follows. The platform
> > + device tree bindings are responsible for defining whether each property is
> required or optional.
>
> Nothing improved - drop paragraph.
These descriptions are based this file, and because their roles are close, only some key elements have been changed
of course, I will make corresponding modifications according to your remarks
https://elixir.bootlin.com/linux/v6.9/source/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
>
> > +
> > +properties:
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port at 0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Port node with one endpoint connected to a display controller
> node.
> > +
> > + port at 1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + Port node with one endpoint connected to a hdmi-connector
> node.
> > +
> > + required:
> > + - port at 0
> > + - port at 1
>
> ...
>
> > diff --git
> > a/Documentation/devicetree/bindings/display/starfive/starfive,dsi-enco
> > der.yaml
> > b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-enco
> > der.yaml
> > new file mode 100644
> > index 000000000000..07aa147a9db1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-
> > +++ encoder.yaml
> > @@ -0,0 +1,92 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.y
> > +aml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: starfive jh7110 SoC Encoder
> > +
> > +maintainers:
> > + - Keith Zhao <keith.zhao at starfivetech.com>
> > +
> > +description:
> > + Device-Tree bindings for simple encoder.
>
> Again you ignored the comments.
>
> When you receive a comment, apply it everywhere, not in only one part of patch
> while keeping wrong code everywhere else.
>
> > + Simple encoder driver only has basic functionality.
>
> Not related to bindings, drop. This is about hardware, not your driver.
>
> > + the hardware of dc8200 has 2 output interface, and uses syscon to
> > + select which one to be used.
>
> Nothing improved.
>
> Read my previous comments:
>
> 1. Please make it a proper sentences, with proper wrapping.
>
> > +
> > +properties:
> > + compatible:
> > + const: starfive,dsi-encoder
> > +
> > + starfive,syscon:
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + items:
> > + - items:
> > + - description: phandle to syscon that select crtc output.
> > + - description: Offset of crtc selection
> > + - description: Shift of crtc selection
> > + description:
> > + A phandle to syscon with two arguments that configure select
> output.
> > + The argument one is the offset of crtc selection, the
> > + argument two is the shift of crtc selection.
>
> Don't repeat constraints in free form text. Say something useful instead, like
> what is its purpose.
>
> No reg? Then why this is not just part of syscon? That's not a separate device,
> no.
>
> You received a feedback already about this: do not create fake bindings just to
> instantiate your drivers.
>
Yes , "do not create fake bindings just to instantiate your drivers." , I got this message ,
In lastest patchset, there was a display-subsystem dt-binding with no reg , I deleted it.
reg != syscon reg , got it .
I will restructure the code structure in the next version to meet this requirement,
so that this dts node can not be added, same with yaml file.
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port at 0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + The first port should be the input coming from the associated dc
> channel.
> > +
> > + port at 1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + The second port should be the output coming from the
> associated bridge.
> > +
> > + required:
> > + - port at 0
> > + - port at 1
> > +
> > +required:
> > + - compatible
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + dssctrl: dssctrl at 295b0000 {
>
> Drop node, not erlated.
>
> > + compatible = "starfive,jh7110-vout-syscon", "syscon";
> > + reg = <0x295b0000 0x90>;
> > + };
> > +
> > + dsi_encoder: dsi_encoder {
>
> Totally messed indentation. Use 4 spaces for example indentation.
>
> Also, drop label.
>
> Also, underscores are not allowed in node names.
>
> Also, Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-
> basics.html#generic-names-recommendation
>
> This is terrible code.
>
> > + compatible = "starfive,dsi-encoder";
> > + starfive,syscon = <&dssctrl 0x8 0x12>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + /* input */
> > + port at 0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0>;
> > + dsi_input0:endpoint at 0 {
> > + reg = <0>;
> > + remote-endpoint = <&dc_out_dpi1>;
> > + };
> > + };
> > + /* output */
> > + port at 1 {
> > + reg = <1>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + dsi_out:endpoint {
> > + remote-endpoint = <&mipi_in>;
> > + };
> > + };
> > + };
> > + };
> > diff --git
> > a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-d
> > c8200.yaml
> > b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-d
> > c8200.yaml
> > new file mode 100644
> > index 000000000000..a28dfdd471b6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh71
> > +++ 10-dc8200.yaml
> > @@ -0,0 +1,169 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200
> > +.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: STARFIVE JH7110 SoC display controller
> > +
> > +description:
> > + The STARFIVE JH7110 SoC uses the display controller based on
> > +Verisilicon IP(DC8200)
> > + to transfer the image data from a video memory buffer to an external LCD
> interface.
> > +
> > + pipe0 binds HDMI for primary display,
> > + pipe1 binds DSI for external display.
> > +
> > + +------------------------------+
> > + | |
> > + | |
> > + +----+ | +-------------------+ | +-------+ +------+ +------+
> > + | +----->+ dc controller 0 +--->----->+HDMICtl| ->+ PHY
> +-->+PANEL0+
> > + |AXI | | +-------------------+ | +-------+ +------+ +------+
> > + | | | |
> > + | | | |
> > + | | | |
> > + | | | |
> > + |APB | | +-------------------+ +---------+ +------+ +-------+
> > + | +----->+ dc controller 1 +--->---->+ dsiTx +--->+DPHY +->+
> PANEL1+
> > + | | | +-------------------+ +---------+ +------+ +-------+
> > + +----+ | |
> > + +------------------------------+
> > +
> > +maintainers:
> > + - Keith Zhao <keith.zhao at starfivetech.com>
> > +
> > +properties:
> > + compatible:
> > + const: starfive,jh7110-dc8200
> > +
> > + reg:
> > + items:
> > + - description: host interface address and length
> > + - description: display physical base address and length
> > +
> > + reg-names:
> > + items:
> > + - const: host
> > + - const: base
> > +
> > + clocks:
> > + items:
> > + - description: Clock for display system noc bus.
> > + - description: Core clock for display controller.
> > + - description: Clock for axi bus to access ddr.
> > + - description: Clock for ahb bus to R/W the phy regs.
> > + - description: Pixel clock for display channel 0.
> > + - description: Pixel clock for display channel 1.
> > + - description: Pixel clock from hdmi.
> > + - description: Pixel clock for soc .
> > +
> > + clock-names:
> > + items:
> > + - const: noc_bus
> > + - const: dc_core
> > + - const: axi_core
> > + - const: ahb
> > + - const: channel0
> > + - const: channel1
> > + - const: hdmi_tx
> > + - const: dc_parent
> > +
> > + resets:
> > + items:
> > + - description: Reset for axi bus.
> > + - description: Reset for ahb bus.
> > + - description: Core reset of display controller.
> > +
> > + reset-names:
> > + items:
> > + - const: axi
> > + - const: ahb
> > + - const: core
> > +
> > + interrupts:
> > + items:
> > + - description: The interrupt will be generated when DC finish
> > + one frame
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port at 0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + channel 0 output
> > +
> > + port at 1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description:
> > + channel 1 output
> > +
> > + required:
> > + - port at 0
> > + - port at 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/starfive,jh7110-crg.h>
> > + #include <dt-bindings/reset/starfive,jh7110-crg.h>
> > + dc8200: lcd-controller at 29400000 {
> > + compatible = "starfive,jh7110-dc8200";
> > + reg = <0x29400000 0x100>,
> > + <0x29400800 0x2000>;
> > + reg-names = "host", "base";
> > +
> > + interrupts = <95>;
> > + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
> > + <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
>
> Align the lines. In other places as well.
>
> > + <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
> > + <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
> > + <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
> > + <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
> > + <&hdmitx0_pixelclk>,
> > + <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
> > + clock-names = "noc_bus", "dc_core", "axi_core", "ahb",
> > + "channel0", "channel1", "hdmi_tx", "dc_parent";
> > + resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
> > + <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
> > + <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
> > + reset-names = "axi","ahb", "core";
> > +
> > + crtc_out: ports {
>
> Totally messed indentation.
>
>
> > diff --git
> > a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-i
> > nno-hdmi.yaml
> > b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-i
> > nno-hdmi.yaml
> > new file mode 100644
> > index 000000000000..bfd7dc41fc14
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh71
> > +++ 10-inno-hdmi.yaml
> > @@ -0,0 +1,75 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-h
> > +dmi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Starfive JH7110 Innosilicon HDMI controller
> > +
> > +maintainers:
> > + - Keith Zhao <keith.zhao at starfivetech.com>
> > +
> > +allOf:
> > + - $ref: ../bridge/innosilicon,inno-hdmi.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: "starfive,jh7110-inno-hdmi"
>
> You did not test it. Drop quotes.
>
> Untested bindings, so I will skip review for now.
In fact, I have used the check instruction, the result is pass with no warning, is there a difference in the command?
make -j8 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/starfive/
......
DTEX Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.example.dts
DTEX Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.example.dts
DTEX Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.example.dts
DTC_CHK Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.example.dtb
DTC_CHK Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.example.dtb
DTC_CHK Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.example.dtb
Thanks for your remarks , I hope it does not affect your happy life
>
>
>
>
> Best regards,
> Krzysztof
More information about the linux-arm-kernel
mailing list