[PATCH 1/3] thermal: st: switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()

Raphael Gallais-Pou rgallaispou at gmail.com
Sat May 18 05:12:04 PDT 2024


Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.

Remove those guards on every ST thermal related drivers.

Signed-off-by: Raphael Gallais-Pou <rgallaispou at gmail.com>
---
 drivers/thermal/st/st_thermal.c        | 4 +---
 drivers/thermal/st/st_thermal_memmap.c | 2 +-
 drivers/thermal/st/stm_thermal.c       | 8 +++-----
 3 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 2a105409864e..5f33543a3a54 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -236,7 +236,6 @@ void st_thermal_unregister(struct platform_device *pdev)
 }
 EXPORT_SYMBOL_GPL(st_thermal_unregister);
 
-#ifdef CONFIG_PM_SLEEP
 static int st_thermal_suspend(struct device *dev)
 {
 	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
@@ -265,9 +264,8 @@ static int st_thermal_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
-SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
+DEFINE_SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
 EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
 
 MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh at st.com>");
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
index 29c2269b0fb3..28b380013956 100644
--- a/drivers/thermal/st/st_thermal_memmap.c
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -180,7 +180,7 @@ static void st_mmap_remove(struct platform_device *pdev)
 static struct platform_driver st_mmap_thermal_driver = {
 	.driver = {
 		.name	= "st_thermal_mmap",
-		.pm     = &st_thermal_pm_ops,
+		.pm     = pm_sleep_ptr(&st_thermal_pm_ops),
 		.of_match_table = st_mmap_thermal_of_match,
 	},
 	.probe		= st_mmap_probe,
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index 34785b9276fc..ffd988600ed6 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -440,7 +440,6 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
 	return ret;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int stm_thermal_suspend(struct device *dev)
 {
 	struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
@@ -466,10 +465,9 @@ static int stm_thermal_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
-static SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
-			 stm_thermal_suspend, stm_thermal_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
+				stm_thermal_suspend, stm_thermal_resume);
 
 static const struct thermal_zone_device_ops stm_tz_ops = {
 	.get_temp	= stm_thermal_get_temp,
@@ -580,7 +578,7 @@ static void stm_thermal_remove(struct platform_device *pdev)
 static struct platform_driver stm_thermal_driver = {
 	.driver = {
 		.name	= "stm_thermal",
-		.pm     = &stm_thermal_pm_ops,
+		.pm     = pm_sleep_ptr(&stm_thermal_pm_ops),
 		.of_match_table = stm_thermal_of_match,
 	},
 	.probe		= stm_thermal_probe,

-- 
2.45.1




More information about the linux-arm-kernel mailing list