[PATCH v1 05/10] spi: pxa2xx: Print DMA burst size only when DMA is enabled

[Andy Shevchenko]

Print DMA burst size only when DMA is enabled to avoid making
a false impression that DMA is enabled when it may be not.

Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 drivers/spi/spi-pxa2xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 56ff296925b7..6bbeb1d09ed9 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1412,7 +1412,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 		if (IS_ERR(platform_info))
 			return dev_err_probe(dev, PTR_ERR(platform_info), "missing platform data\n");
 	}
-	dev_dbg(dev, "DMA burst size set to %u\n", platform_info->dma_burst_size);
 
 	ssp = pxa_ssp_request(pdev->id, pdev->name);
 	if (!ssp)
@@ -1496,6 +1495,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 			controller->max_dma_len = MAX_DMA_LEN;
 			controller->max_transfer_size =
 				pxa2xx_spi_max_dma_transfer_size;
+
+			dev_dbg(dev, "DMA burst size set to %u\n", platform_info->dma_burst_size);
 		}
 	}
 
-- 
2.43.0.rc1.1336.g36b5255a03ac