[PATCH v3 4/4] ARM: Implement PAN for LPAE by TTBR0 page table walks disablement

[Geert Uytterhoeven]

Hi Ard,

On Tue, May 14, 2024 at 10:25 AM Ard Biesheuvel <ardb at kernel.org> wrote:
> On Tue, 14 May 2024 at 10:04, Geert Uytterhoeven <geert at linux-m68k.org> wrote:
> > On Tue, May 14, 2024 at 9:59 AM Ard Biesheuvel <ardb at kernel.org> wrote:
> > > On Tue, 14 May 2024 at 09:46, Linus Walleij <linus.walleij at linaro.org> wrote:
> > > > On Tue, May 14, 2024 at 8:41 AM Geert Uytterhoeven <geert at linux-m68k.org> wrote:
> > > >
> > > > > I sent you a small initramfs by PM.
> > > >
> > > > Booted this just fine on Vexpress QEMU:
> > > >
> > > > Run /init as init process
> > > > sysctl: error: 'kernel.hotplug' is an unknown key
> > > >
> > > >
> > > > boot (Linux 6.9.0-rc1+, BusyBox v1.16.0.git, kexec-tools 2.0.1-git)
> > > > / # mount -t debugfs none /sys/kernel/debug
> > > > / # echo "ACCESS_USERSPACE" | cat >/sys/kernel/debug/provoke-crash/DIRECT
> > > > lkdtm: Performing direct entry ACCESS_USERSPACE
> > > > lkdtm: attempting bad read at 76fea000
> > > > 8<--- cut here ---
> > > > Unable to handle kernel paging request at virtual address 76fea000 when read
> > > > [76fea000] *pgd=82c93003, *pmd=82c94003, *pte=a00000811e2f5f
> > > > Internal error: Oops: 206 [#1] SMP ARM
> > > > CPU: 1 PID: 86 Comm: cat Not tainted 6.9.0-rc1+ #46
> > > > Hardware name: ARM-Versatile Express
> > > > PC is at lkdtm_ACCESS_USERSPACE+0xc0/0x138
> > > > LR is at lkdtm_ACCESS_USERSPACE+0xc0/0x138
> > > >
> > > > I'm starting to think it is something about different LPAE implementations here.
> > >
> > > I have built multi_v7_defconfig with the following enabled
> > >
> > > CONFIG_ARM_LPAE=y
> > > CONFIG_CPU_TTBR0_PAN=y
> > > CONFIG_LKDTM=y
> > >
> > > and the resulting kernel boots happily as a 32-bit VM running under a
> > > Rpi4 KVM host.
> > >
> > > Could someone post an actual .config that reproduces this? Rpi4 is
> > > A72, which both works and doesn't work in Florian's testing, so I'd be
> > > highly surprised if this is not a config issue.
> >
> > shmobile_defconfig with CONFIG_LPAE=y added failed for me before.
> >
> > Building multi_v7_defconfig with the above enabled...

And that works, while shmobile_defconfig with the above does not!
So it is config-related.

FTR, plain multi_v7_defconfig also works.

> What are you passing as the command line?

ignore_loglevel ip=dhcp root=/dev/nfs rw nfsroot=<ip>:<path>/debian-armhf,tcp,v3

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds