[PATCH v3 4/6] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks

[Shengjiu Wang]

Add CLK_SET_RATE_PARENT flags that when the device driver sets the
child clock rate, parent clock frequency can be refined accordingly.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
---
 drivers/clk/imx/clk-imx8mp-audiomix.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
index b381d6f784c8..466b5b0d665c 100644
--- a/drivers/clk/imx/clk-imx8mp-audiomix.c
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -269,12 +269,12 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(sels); i++) {
 		if (sels[i].num_parents == 1) {
 			hw = devm_clk_hw_register_gate_parent_data(dev,
-				sels[i].name, &sels[i].parent, 0,
+				sels[i].name, &sels[i].parent, CLK_SET_RATE_PARENT,
 				base + sels[i].reg, sels[i].shift, 0, NULL);
 		} else {
 			hw = devm_clk_hw_register_mux_parent_data_table(dev,
 				sels[i].name, sels[i].parents,
-				sels[i].num_parents, 0,
+				sels[i].num_parents, CLK_SET_RATE_PARENT,
 				base + sels[i].reg,
 				sels[i].shift, sels[i].width,
 				0, NULL, NULL);
@@ -317,7 +317,8 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS] = hw;
 
 	hw = devm_clk_hw_register_gate(dev, "sai_pll_out", "sai_pll_bypass",
-				       0, base + SAI_PLL_GNRL_CTL, 13,
+				       CLK_SET_RATE_PARENT,
+				       base + SAI_PLL_GNRL_CTL, 13,
 				       0, NULL);
 	if (IS_ERR(hw)) {
 		ret = PTR_ERR(hw);
@@ -326,7 +327,8 @@ static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
 	clk_hw_data->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT] = hw;
 
 	hw = devm_clk_hw_register_fixed_factor(dev, "sai_pll_out_div2",
-					       "sai_pll_out", 0, 1, 2);
+					       "sai_pll_out",
+					       CLK_SET_RATE_PARENT, 1, 2);
 	if (IS_ERR(hw)) {
 		ret = PTR_ERR(hw);
 		goto err_clk_register;
-- 
2.34.1