[PATCH 09/17] dt-bindings: interrupt-controller: Add support for Microchip LAN966x OIC

Herve Codina herve.codina at bootlin.com
Mon May 13 10:04:57 PDT 2024


Hi Rob,

On Mon, 13 May 2024 09:53:58 -0500
Rob Herring <robh at kernel.org> wrote:

> On Mon, May 13, 2024 at 02:37:20PM +0200, Herve Codina wrote:
> > Hi Rob,
> > 
> > On Tue, 7 May 2024 10:28:06 -0500
> > Rob Herring <robh at kernel.org> wrote:
> > 
> > ...  
> > > > +examples:
> > > > +  - |
> > > > +    interrupt-controller at e00c0120 {
> > > > +        compatible = "microchip,lan966x-oic";
> > > > +        reg = <0xe00c0120 0x190>;    
> > > 
> > > Looks like this is part of some larger block?
> > >   
> > 
> > According to the registers information document:
> >   https://microchip-ung.github.io/lan9662_reginfo/reginfo_LAN9662.html?select=cpu,intr
> > 
> > The interrupt controller is mapped at offset 0x48 (offset in number of
> > 32bit words).  
> > -> Address offset: 0x48 * 4 = 0x120
> > -> size: (0x63 + 1) *  4 = 0x190  
> > 
> > IMHO, the reg property value looks correct.  
> 
> What I mean is h/w blocks don't just start at some address with small 
> alignment. That wouldn't work from a physical design standpoint. The 
> larger block here is "CPU System Regs". The block as a whole should be 
> documented, but maybe that ship already sailed.

The clock controller, also part of the "CPU System Regs" is already defined
and used without the larger block
  Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml

IMHO, the binding related to the interrupt controller should be consistent
with the one related to the clock controller.


> 
> Also, here you call it the OIC, but the link above calls it the VCore 
> interrupt controller.

Yes, I call it OIC (Outband Interrupt Controller) as it is its name in the
datasheet explaining how it works.
The datasheet I have is not publicly available and so, I can point only to
the register map (url provided).

I think it would be better to keep "Outband Interrupt Controller" as
mentioned in the datasheet.

Best regards,
Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



More information about the linux-arm-kernel mailing list