[PATCH v2 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock

[Jerome Brunet]

On Fri 10 May 2024 at 12:08, Dmitry Rokosov <ddrokosov at salutedevices.com> wrote:

> The 'syspll' PLL, also known as the system PLL, is a general and
> essential PLL responsible for generating the CPU clock frequency.
> With its wide-ranging capabilities, it is designed to accommodate
> frequencies within the range of 768MHz to 1536MHz.
>
> Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
> ---
>  drivers/clk/meson/a1-pll.c | 79 ++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/a1-pll.h |  6 +++
>  2 files changed, 85 insertions(+)
>
> diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
> index 60b2e53e7e51..af47ba308bbe 100644
> --- a/drivers/clk/meson/a1-pll.c
> +++ b/drivers/clk/meson/a1-pll.c
> @@ -138,6 +138,82 @@ static struct clk_regmap hifi_pll = {
>  	},
>  };
>  
> +static const struct pll_mult_range sys_pll_mult_range = {
> +	.min = 32,
> +	.max = 64,
> +};
> +
> +static const struct reg_sequence sys_pll_init_regs[] = {
> +	{ .reg = ANACTRL_SYSPLL_CTRL1, .def = 0x01800000 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL2, .def = 0x00001100 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL3, .def = 0x10022300 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL4, .def = 0x00300000 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL0, .def = 0x01f18432 },
> +};
> +
> +static struct clk_regmap sys_pll = {
> +	.data = &(struct meson_clk_pll_data){
> +		.en = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 28,
> +			.width   = 1,
> +		},
> +		.m = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 0,
> +			.width   = 8,
> +		},
> +		.n = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 10,
> +			.width   = 5,
> +		},
> +		.frac = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL1,
> +			.shift   = 0,
> +			.width   = 19,
> +		},
> +		.l = {
> +			.reg_off = ANACTRL_SYSPLL_STS,
> +			.shift   = 31,
> +			.width   = 1,
> +		},
> +		.current_en = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 26,
> +			.width   = 1,
> +		},
> +		.l_detect = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL2,
> +			.shift   = 6,
> +			.width   = 1,
> +		},
> +		.range = &sys_pll_mult_range,
> +		.init_regs = sys_pll_init_regs,
> +		.init_count = ARRAY_SIZE(sys_pll_init_regs),

Like other 'fishy' flags, I would like a clear comment why this flag is
required so, 2y from now, we will know why it was put there and how we
can deal with it.

> +		.flags = CLK_MESON_PLL_INIT_ONCE,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "sys_pll",
> +		.ops = &meson_clk_pll_ops,
> +		.parent_names = (const char *[]){ "syspll_in" },
> +		.num_parents = 1,
> +	},
> +};
> +
> +static struct clk_fixed_factor sys_pll_div16 = {
> +	.mult = 1,
> +	.div = 16,
> +	.hw.init = &(struct clk_init_data){
> +		.name = "sys_pll_div16",
> +		.ops = &clk_fixed_factor_ops,
> +		.parent_hws = (const struct clk_hw *[]) {
> +			&sys_pll.hw
> +		},
> +		.num_parents = 1,
> +	},
> +};

Unlike the fdivs, this fixed divider is not part of the diagram
describing the syspll clock.

IMO, it could as well be in peripheral controller because it exists
(from what I can see) just testing purposes, to make the sys pll
observable through tst_out or gen_clk.

It also looks less awkward in the bindings.

> +
>  static struct clk_fixed_factor fclk_div2_div = {
>  	.mult = 1,
>  	.div = 2,
> @@ -283,6 +359,8 @@ static struct clk_hw *a1_pll_hw_clks[] = {
>  	[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
>  	[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
>  	[CLKID_HIFI_PLL]	= &hifi_pll.hw,
> +	[CLKID_SYS_PLL]		= &sys_pll.hw,
> +	[CLKID_SYS_PLL_DIV16]	= &sys_pll_div16.hw,
>  };
>  
>  static struct clk_regmap *const a1_pll_regmaps[] = {
> @@ -293,6 +371,7 @@ static struct clk_regmap *const a1_pll_regmaps[] = {
>  	&fclk_div5,
>  	&fclk_div7,
>  	&hifi_pll,
> +	&sys_pll,
>  };
>  
>  static struct regmap_config a1_pll_regmap_cfg = {
> diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
> index 4be17b2bf383..666d9b2137e9 100644
> --- a/drivers/clk/meson/a1-pll.h
> +++ b/drivers/clk/meson/a1-pll.h
> @@ -18,6 +18,12 @@
>  #define ANACTRL_FIXPLL_CTRL0	0x0
>  #define ANACTRL_FIXPLL_CTRL1	0x4
>  #define ANACTRL_FIXPLL_STS	0x14
> +#define ANACTRL_SYSPLL_CTRL0	0x80
> +#define ANACTRL_SYSPLL_CTRL1	0x84
> +#define ANACTRL_SYSPLL_CTRL2	0x88
> +#define ANACTRL_SYSPLL_CTRL3	0x8c
> +#define ANACTRL_SYSPLL_CTRL4	0x90
> +#define ANACTRL_SYSPLL_STS	0x94
>  #define ANACTRL_HIFIPLL_CTRL0	0xc0
>  #define ANACTRL_HIFIPLL_CTRL1	0xc4
>  #define ANACTRL_HIFIPLL_CTRL2	0xc8


-- 
Jerome