[EXT] Re: [PATCH 4/4] firmware: imx: add driver for NXP EdgeLock Enclave
Pankaj Gupta
pankaj.gupta at nxp.com
Mon May 13 02:16:13 PDT 2024
> -----Original Message-----
> From: Amit Singh Tomar <amitsinght at marvell.com>
> Sent: Saturday, May 11, 2024 1:09 AM
> To: Frank Li <frank.li at nxp.com>; Pankaj Gupta <pankaj.gupta at nxp.com>
> Cc: Jonathan Corbet <corbet at lwn.net>; Rob Herring <robh+dt at kernel.org>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Conor Dooley
> <conor+dt at kernel.org>; Shawn Guo <shawnguo at kernel.org>; Sascha Hauer
> <s.hauer at pengutronix.de>; Pengutronix Kernel Team
> <kernel at pengutronix.de>; Fabio Estevam <festevam at gmail.com>; linux-
> doc at vger.kernel.org; linux-kernel at vger.kernel.org;
> devicetree at vger.kernel.org; imx at lists.linux.dev; linux-arm-
> kernel at lists.infradead.org
> Subject: [EXT] Re: [PATCH 4/4] firmware: imx: add driver for NXP EdgeLock
> Enclave
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> Hi,
> >
> > ----------------------------------------------------------------------
> > On Fri, May 10, 2024 at 06:57:30PM +0530, Pankaj Gupta wrote:
> >> NXP hardware IP(s) for secure-enclaves like Edgelock Enclave(ELE),
> >> are embedded in the SoC to support the features like HSM, SHE & V2X,
> >> using message based communication interface.
> >>
> >> The secure enclave FW communicates on a dedicated messaging unit(MU)
> >> based interface(s) with application core, where kernel is running.
> >> It exists on specific i.MX processors. e.g. i.MX8ULP, i.MX93.
> >>
> >> This patch adds the driver for communication interface to secure-enclave,
> >> for exchanging messages with NXP secure enclave HW IP(s) like EdgeLock
> Enclave,
> >> both from:
> >> - User-Space Applications via character driver.
> >> - Kernel-space, used by kernel management layers like DM-Crypt.
> >>
> >> ABI documentation for the NXP secure-enclave driver.
> >>
> >> User-space library using this driver:
> >> - i.MX Secure Enclave library:
> >> -- URL:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefe
> nse.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__github.com_nxp-
> 2Dimx_imx-2Dsecure-
> 2Denclave.git%26d%3DDwICAg%26c%3DnKjWec2b6R0mOyPaz7xtfQ%26r%3
> DV_GK7jRuCHDErm6txmgDK1-MbUihtnSQ3gPgB-A-
> JKU%26m%3DeKFfdy51aVVEAe4I9Lk2CN77y_4Hxf2pI_9fv5pVWLo9DwQNgC
> pca6smAwvwFycf%26s%3DIfKbvjSfdUcqz-
> WEWdhbj1_TnqGryOffX1dV0T5Rf_A%26e%3D&data=05%7C02%7Cpankaj.gu
> pta%40nxp.com%7C111dd89e61f149b5f7e708dc71290348%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C638509668202231639%7CUnknown
> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=FEt3DR2WBF3v8fNgnliJhVB10
> MCCkaf8KYGmLz3fk3A%3D&reserved=0 ,
> >> - i.MX Secure Middle-Ware:
> >> -- URL:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefe
> nse.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__github.com_nxp-
> 2Dimx_imx-
> 2Dsmw.git%26d%3DDwICAg%26c%3DnKjWec2b6R0mOyPaz7xtfQ%26r%3DV
> _GK7jRuCHDErm6txmgDK1-MbUihtnSQ3gPgB-A-
> JKU%26m%3DeKFfdy51aVVEAe4I9Lk2CN77y_4Hxf2pI_9fv5pVWLo9DwQNgC
> pca6smAwvwFycf%26s%3DLLz2plXTM1AS-
> zJ1HlZRKiBE8GmRJBduR_0dnOuFjRo%26e%3D&data=05%7C02%7Cpankaj.gu
> pta%40nxp.com%7C111dd89e61f149b5f7e708dc71290348%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C638509668202240209%7CUnknown
> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=YOBEbhRl7XJeLu%2BdaznovR
> 4lDrbyoOlmxUP9BiYZ330%3D&reserved=0
> >>
> >> Signed-off-by: Pankaj Gupta <pankaj.gupta at nxp.com>
> >> ---
> >> Documentation/ABI/testing/se-cdev | 42 ++
> >> drivers/firmware/imx/Kconfig | 12 +
> >> drivers/firmware/imx/Makefile | 2 +
> >> drivers/firmware/imx/ele_base_msg.c | 287 ++++++++
> >> drivers/firmware/imx/ele_base_msg.h | 70 ++
> >> drivers/firmware/imx/ele_common.c | 341 +++++++++
> >> drivers/firmware/imx/ele_common.h | 43 ++
> >> drivers/firmware/imx/se_ctrl.c | 1339
> +++++++++++++++++++++++++++++++++++
> >> drivers/firmware/imx/se_ctrl.h | 151 ++++
> >> include/linux/firmware/imx/se_api.h | 14 +
> >> include/uapi/linux/se_ioctl.h | 88 +++
> >> 11 files changed, 2389 insertions(+)
> >>
> >> diff --git a/Documentation/ABI/testing/se-cdev
> b/Documentation/ABI/testing/se-cdev
> >> new file mode 100644
> >> index 000000000000..699525af6b86
> >> --- /dev/null
> >> +++ b/Documentation/ABI/testing/se-cdev
> >> @@ -0,0 +1,42 @@
> >> +What: /dev/<se>_mu[0-9]+_ch[0-9]+
> >> +Date: May 2024
> >> +KernelVersion: 6.8
> >> +Contact: linux-imx at nxp.com, pankaj.gupta at nxp.com
> >> +Description:
> >> + NXP offers multiple hardware IP(s) for secure-enclaves like
> EdgeLock-
> >> + Enclave(ELE), SECO. The character device file-descriptors
> >> + /dev/<se>_mu*_ch* are the interface between user-space NXP's
> secure-
> >> + enclave shared-library and the kernel driver.
> >> +
> >> + The ioctl(2)-based ABI is defined and documented in
> >> + [include]<linux/firmware/imx/ele_mu_ioctl.h>
> >> + ioctl(s) are used primarily for:
> >> + - shared memory management
> >> + - allocation of I/O buffers
> >> + - get mu info
> >> + - setting a dev-ctx as receiver that is slave to fw
> >> + - get SoC info
> >> +
> >> + The following file operations are supported:
> >> +
> >> + open(2)
> >> + Currently the only useful flags are O_RDWR.
> >> +
> >> + read(2)
> >> + Every read() from the opened character device context is waiting
> on
> >> + wakeup_intruptible, that gets set by the registered mailbox
> callback
> >> + function; indicating a message received from the firmware on
> message-
> >> + unit.
> >> +
> >> + write(2)
> >> + Every write() to the opened character device context needs to
> acquire
> >> + mailbox_lock, before sending message on to the message unit.
> >> +
> >> + close(2)
> >> + Stops and free up the I/O contexts that was associated
> >> + with the file descriptor.
> >> +
> >> +Users:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefe
> nse.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__github.com_nxp-
> 2Dimx_imx-2Dsecure-
> 2Denclave.git%26d%3DDwICAg%26c%3DnKjWec2b6R0mOyPaz7xtfQ%26r%3
> DV_GK7jRuCHDErm6txmgDK1-MbUihtnSQ3gPgB-A-
> JKU%26m%3DeKFfdy51aVVEAe4I9Lk2CN77y_4Hxf2pI_9fv5pVWLo9DwQNgC
> pca6smAwvwFycf%26s%3DIfKbvjSfdUcqz-
> WEWdhbj1_TnqGryOffX1dV0T5Rf_A%26e%3D&data=05%7C02%7Cpankaj.gu
> pta%40nxp.com%7C111dd89e61f149b5f7e708dc71290348%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C638509668202246211%7CUnknown
> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=5Cpw4sCLsKzv%2FRiikt2aA4d
> ILonYXeFzcnMo4UugdQ4%3D&reserved=0 ,
> >> +
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefe
> nse.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__github.com_nxp-
> 2Dimx_imx-
> 2Dsmw.git%26d%3DDwICAg%26c%3DnKjWec2b6R0mOyPaz7xtfQ%26r%3DV
> _GK7jRuCHDErm6txmgDK1-MbUihtnSQ3gPgB-A-
> JKU%26m%3DeKFfdy51aVVEAe4I9Lk2CN77y_4Hxf2pI_9fv5pVWLo9DwQNgC
> pca6smAwvwFycf%26s%3DLLz2plXTM1AS-
> zJ1HlZRKiBE8GmRJBduR_0dnOuFjRo%26e%3D&data=05%7C02%7Cpankaj.gu
> pta%40nxp.com%7C111dd89e61f149b5f7e708dc71290348%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C638509668202250817%7CUnknown
> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=m5NZLmshBmqnnbb2U%2Bm
> cMYYbv7LS8X%2ByzMVTs%2BI7tkI%3D&reserved=0
> >> + crypto/skcipher,
> >> + drivers/nvmem/imx-ocotp-ele.c
> >> diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
> >> index 183613f82a11..56bdca9bd917 100644
> >> --- a/drivers/firmware/imx/Kconfig
> >> +++ b/drivers/firmware/imx/Kconfig
> >> @@ -22,3 +22,15 @@ config IMX_SCU
> >>
> >> This driver manages the IPC interface between host CPU and the
> >> SCU firmware running on M4.
> >> +
> >> +config IMX_SEC_ENCLAVE
> >> + tristate "i.MX Embedded Secure Enclave - EdgeLock Enclave Firmware
> driver."
> >> + depends on IMX_MBOX && ARCH_MXC && ARM64
> >> + default m if ARCH_MXC
> >> +
> >> + help
> >> + It is possible to use APIs exposed by the iMX Secure Enclave HW IP
> called:
> >> + - EdgeLock Enclave Firmware (for i.MX8ULP, i.MX93),
> >> + like base, HSM, V2X & SHE using the SAB protocol via the shared
> Messaging
> >> + Unit. This driver exposes these interfaces via a set of file descriptors
> >> + allowing to configure shared memory, send and receive messages.
> >> diff --git a/drivers/firmware/imx/Makefile
> b/drivers/firmware/imx/Makefile
> >> index 8f9f04a513a8..aa9033e0e9e3 100644
> >> --- a/drivers/firmware/imx/Makefile
> >> +++ b/drivers/firmware/imx/Makefile
> >> @@ -1,3 +1,5 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >> obj-$(CONFIG_IMX_DSP) += imx-dsp.o
> >> obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o
> imx-scu-soc.o
> >> +sec_enclave-objs = se_ctrl.o ele_common.o ele_base_msg.o
> >> +obj-${CONFIG_IMX_SEC_ENCLAVE} += sec_enclave.o
> >> diff --git a/drivers/firmware/imx/ele_base_msg.c
> b/drivers/firmware/imx/ele_base_msg.c
> >> new file mode 100644
> >> index 000000000000..0463f26d93c7
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/ele_base_msg.c
> >> @@ -0,0 +1,287 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#include <linux/types.h>
> >> +#include <linux/completion.h>
> >> +#include <linux/dma-mapping.h>
> >> +
> >> +#include "ele_base_msg.h"
> >> +#include "ele_common.h"
> >> +
> >> +int ele_get_info(struct device *dev, struct soc_info *s_info)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct se_api_msg *tx_msg __free(kfree);
> >> + struct se_api_msg *rx_msg __free(kfree);
> >> + phys_addr_t get_info_addr;
> >> + u32 *get_info_data;
> >> + u32 status;
> >> + int ret;
> >> +
> >> + if (!priv || !s_info)
> >> + goto exit;
> >> +
> >> + memset(s_info, 0x0, sizeof(*s_info));
> >> +
> >> + if (priv->mem_pool_name)
> >> + get_info_data = get_phy_buf_mem_pool(dev,
> >> + priv->mem_pool_name,
> >> + &get_info_addr,
> >> + ELE_GET_INFO_BUFF_SZ);
> >> + else
> >> + get_info_data = dmam_alloc_coherent(dev,
> >> + ELE_GET_INFO_BUFF_SZ,
> >> + &get_info_addr,
> >> + GFP_KERNEL);
> >> + if (!get_info_data) {
> >> + ret = -ENOMEM;
> >> + dev_err(dev,
> >> + "%s: Failed to allocate get_info_addr.\n",
> >> + __func__);
> >> + goto exit;
> >> + }
> >> +
> >> + tx_msg = kzalloc(ELE_GET_INFO_REQ_MSG_SZ << 2, GFP_KERNEL);
> >> + if (!tx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> It seems like you intended to use goto exit; instead of returning
> directly from here. This would ensure that you can free the buffer
> allocated with get_phy_buf_mem_pool in case of an allocation failure.
Accepted.
> >> + }
> >> +
> >> + rx_msg = kzalloc(ELE_GET_INFO_RSP_MSG_SZ << 2, GFP_KERNEL);
> >> + if (!rx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
Will correct here as well.
> >> +
> >> + ret = plat_fill_cmd_msg_hdr(priv,
> >> + (struct se_msg_hdr *)&tx_msg->header,
> >> + ELE_GET_INFO_REQ,
> >> + ELE_GET_INFO_REQ_MSG_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + tx_msg->data[0] = upper_32_bits(get_info_addr);
> >> + tx_msg->data[1] = lower_32_bits(get_info_addr);
> >> + tx_msg->data[2] = ELE_GET_INFO_READ_SZ;
> >> + priv->rx_msg = rx_msg;
> >> + ret = imx_ele_msg_send_rcv(priv, tx_msg);
> >> + if (ret < 0)
> >> + goto exit;
> >> +
> >> + ret = validate_rsp_hdr(priv,
> >> + priv->rx_msg->header,
> >> + ELE_GET_INFO_REQ,
> >> + ELE_GET_INFO_RSP_MSG_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + status = RES_STATUS(priv->rx_msg->data[0]);
> >> + if (status != priv->success_tag) {
> >> + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> >> + ELE_GET_INFO_REQ, status);
> >> + ret = -1;
> >> + }
> >> +
> >> + s_info->imem_state = (get_info_data[ELE_IMEM_STATE_WORD]
> >> + & ELE_IMEM_STATE_MASK) >> 16;
> >> + s_info->major_ver =
> (get_info_data[GET_INFO_SOC_INFO_WORD_OFFSET]
> >> + & SOC_VER_MASK) >> 24;
> >> + s_info->minor_ver =
> ((get_info_data[GET_INFO_SOC_INFO_WORD_OFFSET]
> >> + & SOC_VER_MASK) >> 16) & 0xFF;
> >> + s_info->soc_rev =
> (get_info_data[GET_INFO_SOC_INFO_WORD_OFFSET]
> >> + & SOC_VER_MASK) >> 16;
> >> + s_info->soc_id = get_info_data[GET_INFO_SOC_INFO_WORD_OFFSET]
> >> + & SOC_ID_MASK;
> >> + s_info->serial_num
> >> + = (u64)get_info_data[GET_INFO_SL_NUM_MSB_WORD_OFF] <<
> 32
> >> + | get_info_data[GET_INFO_SL_NUM_LSB_WORD_OFF];
> >> +exit:
> >> + if (get_info_addr) {
> >> + if (priv->mem_pool_name)
> >> + free_phybuf_mem_pool(dev, priv->mem_pool_name,
> >> + get_info_data, ELE_GET_INFO_BUFF_SZ);
> >> + else
> >> + dmam_free_coherent(dev,
> >> + ELE_GET_INFO_BUFF_SZ,
> >> + get_info_data,
> >> + get_info_addr);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int ele_ping(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct se_api_msg *tx_msg __free(kfree);
> >> + struct se_api_msg *rx_msg __free(kfree);
> >
> > If you want __free(kfree) it should be
> >
> > struct se_api_msg *tx_msg __free(kfree) = NULL;
> > struct se_api_msg *rx_msg __free(kfree) = NULL;
> >
> > Or
> >
> > struct se_api_msg *tx_msg __free(kfree) = kzalloc(ELE_PING_REQ_SZ << 2,
> GFP_KERNEL)
> > struct se_api_msg *rx_msg __free(kfree) = kzalloc(ELE_PING_RSP_SZ << 2,
> GFP_KERNEL)
> >
> > otherwise when
> > if (!tx_msg) {
> > return ret;
> >
> > ^^ when go here, rx_msg is random value. So kfree(rx_msg) will
> > access random address.
> >
> > }
> >
> >> + u32 status;
> >> + int ret;
> >> +
> >> + tx_msg = kzalloc(ELE_PING_REQ_SZ << 2, GFP_KERNEL);
> >> + if (!tx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >
> >
> > return -ENOMEM
> >
> > Frank
> >
> >> + }
> >> +
> >> + rx_msg = kzalloc(ELE_PING_RSP_SZ << 2, GFP_KERNEL);
> >> + if (!rx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + ret = plat_fill_cmd_msg_hdr(priv,
> >> + (struct se_msg_hdr *)&tx_msg->header,
> >> + ELE_PING_REQ, ELE_PING_REQ_SZ,
> >> + true);
> >> + if (ret) {
> >> + dev_err(dev, "Error: plat_fill_cmd_msg_hdr failed.\n");
> >> + goto exit;
> >> + }
> >> +
> >> + priv->rx_msg = rx_msg;
> >> + ret = imx_ele_msg_send_rcv(priv, tx_msg);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + ret = validate_rsp_hdr(priv,
> >> + priv->rx_msg->header,
> >> + ELE_PING_REQ,
> >> + ELE_PING_RSP_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + status = RES_STATUS(priv->rx_msg->data[0]);
> >> + if (status != priv->success_tag) {
> >> + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> >> + ELE_PING_REQ, status);
> >> + ret = -1;
> >> + }
> >> +exit:
> >> + return ret;
> >> +}
> >> +
> >> +int ele_service_swap(struct device *dev,
> >> + phys_addr_t addr,
> >> + u32 addr_size, u16 flag)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct se_api_msg *tx_msg __free(kfree);
> >> + struct se_api_msg *rx_msg __free(kfree);
> >> + u32 status;
> >> + int ret;
> >> +
> >> + tx_msg = kzalloc(ELE_SERVICE_SWAP_REQ_MSG_SZ << 2,
> GFP_KERNEL);
> >> + if (!tx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + rx_msg = kzalloc(ELE_SERVICE_SWAP_RSP_MSG_SZ << 2,
> GFP_KERNEL);
> >> + if (!rx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + ret = plat_fill_cmd_msg_hdr(priv,
> >> + (struct se_msg_hdr *)&tx_msg->header,
> >> + ELE_SERVICE_SWAP_REQ,
> >> + ELE_SERVICE_SWAP_REQ_MSG_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + tx_msg->data[0] = flag;
> >> + tx_msg->data[1] = addr_size;
> >> + tx_msg->data[2] = ELE_NONE_VAL;
> >> + tx_msg->data[3] = lower_32_bits(addr);
> >> + tx_msg->data[4] = plat_add_msg_crc((uint32_t *)&tx_msg[0],
> >> + ELE_SERVICE_SWAP_REQ_MSG_SZ);
> >> + priv->rx_msg = rx_msg;
> >> + ret = imx_ele_msg_send_rcv(priv, tx_msg);
> >> + if (ret < 0)
> >> + goto exit;
> >> +
> >> + ret = validate_rsp_hdr(priv,
> >> + priv->rx_msg->header,
> >> + ELE_SERVICE_SWAP_REQ,
> >> + ELE_SERVICE_SWAP_RSP_MSG_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + status = RES_STATUS(priv->rx_msg->data[0]);
> >> + if (status != priv->success_tag) {
> >> + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> >> + ELE_SERVICE_SWAP_REQ, status);
> >> + ret = -1;
> >> + } else {
> >> + if (flag == ELE_IMEM_EXPORT)
> >> + ret = priv->rx_msg->data[1];
> >> + else
> >> + ret = 0;
> >> + }
> >> +exit:
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int ele_fw_authenticate(struct device *dev, phys_addr_t addr)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct se_api_msg *tx_msg __free(kfree);
> >> + struct se_api_msg *rx_msg __free(kfree);
> >> + u32 status;
> >> + int ret;
> >> +
> >> + tx_msg = kzalloc(ELE_FW_AUTH_REQ_SZ << 2, GFP_KERNEL);
> >> + if (!tx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + rx_msg = kzalloc(ELE_FW_AUTH_RSP_MSG_SZ << 2, GFP_KERNEL);
> >> + if (!rx_msg) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> + ret = plat_fill_cmd_msg_hdr(priv,
> >> + (struct se_msg_hdr *)&tx_msg->header,
> >> + ELE_FW_AUTH_REQ,
> >> + ELE_FW_AUTH_REQ_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + tx_msg->data[0] = addr;
> >> + tx_msg->data[1] = 0x0;
> >> + tx_msg->data[2] = addr;
> >> +
> >> + priv->rx_msg = rx_msg;
> >> + ret = imx_ele_msg_send_rcv(priv, tx_msg);
> >> + if (ret < 0)
> >> + goto exit;
> >> +
> >> + ret = validate_rsp_hdr(priv,
> >> + priv->rx_msg->header,
> >> + ELE_FW_AUTH_REQ,
> >> + ELE_FW_AUTH_RSP_MSG_SZ,
> >> + true);
> >> + if (ret)
> >> + goto exit;
> >> +
> >> + status = RES_STATUS(priv->rx_msg->data[0]);
> >> + if (status != priv->success_tag) {
> >> + dev_err(dev, "Command Id[%d], Response Failure = 0x%x",
> >> + ELE_FW_AUTH_REQ, status);
> >> + ret = -1;
> >> + }
> >> +exit:
> >> +
> >> + return ret;
> >> +}
> >> diff --git a/drivers/firmware/imx/ele_base_msg.h
> b/drivers/firmware/imx/ele_base_msg.h
> >> new file mode 100644
> >> index 000000000000..3b3d2bf04a84
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/ele_base_msg.h
> >> @@ -0,0 +1,70 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + *
> >> + * Header file for the EdgeLock Enclave Base API(s).
> >> + */
> >> +
> >> +#ifndef ELE_BASE_MSG_H
> >> +#define ELE_BASE_MSG_H
> >> +
> >> +#include <linux/device.h>
> >> +#include <linux/types.h>
> >> +
> >> +#define WORD_SZ 4
> >> +#define ELE_NONE_VAL 0x0
> >> +
> >> +#define ELE_SUCCESS_IND 0xD6
> >> +
> >> +#define ELE_GET_INFO_REQ 0xDA
> >> +#define ELE_GET_INFO_REQ_MSG_SZ 0x10
> >> +#define ELE_GET_INFO_RSP_MSG_SZ 0x08
> >> +
> >> +#define ELE_GET_INFO_BUFF_SZ 0x100
> >> +#define ELE_GET_INFO_READ_SZ 0xA0
> >> +
> >> +#define DEFAULT_IMX_SOC_VER 0xA0
> >> +#define SOC_VER_MASK 0xFFFF0000
> >> +#define SOC_ID_MASK 0x0000FFFF
> >> +struct soc_info {
> >> + u32 imem_state;
> >> + u8 major_ver;
> >> + u8 minor_ver;
> >> + u16 soc_id;
> >> + u16 soc_rev;
> >> + u64 serial_num;
> >> +};
> >> +
> >> +#define GET_INFO_SOC_INFO_WORD_OFFSET 1
> >> +#define GET_INFO_UUID_WORD_OFFSET 3
> >> +#define GET_INFO_SL_NUM_MSB_WORD_OFF \
> >> + (GET_INFO_UUID_WORD_OFFSET + 3)
> >> +#define GET_INFO_SL_NUM_LSB_WORD_OFF \
> >> + (GET_INFO_UUID_WORD_OFFSET + 0)
> >> +
> >> +#define ELE_PING_REQ 0x01
> >> +#define ELE_PING_REQ_SZ 0x04
> >> +#define ELE_PING_RSP_SZ 0x08
> >> +
> >> +#define ELE_SERVICE_SWAP_REQ 0xDF
> >> +#define ELE_SERVICE_SWAP_REQ_MSG_SZ 0x18
> >> +#define ELE_SERVICE_SWAP_RSP_MSG_SZ 0x0C
> >> +#define ELE_IMEM_SIZE 0x10000
> >> +#define ELE_IMEM_STATE_OK 0xCA
> >> +#define ELE_IMEM_STATE_BAD 0xFE
> >> +#define ELE_IMEM_STATE_WORD 0x27
> >> +#define ELE_IMEM_STATE_MASK 0x00ff0000
> >> +#define ELE_IMEM_EXPORT 0x1
> >> +#define ELE_IMEM_IMPORT 0x2
> >> +
> >> +#define ELE_FW_AUTH_REQ 0x02
> >> +#define ELE_FW_AUTH_REQ_SZ 0x10
> >> +#define ELE_FW_AUTH_RSP_MSG_SZ 0x08
> >> +
> >> +int ele_get_info(struct device *dev, struct soc_info *s_info);
> >> +int ele_ping(struct device *dev);
> >> +int ele_service_swap(struct device *dev,
> >> + phys_addr_t addr,
> >> + u32 addr_size, u16 flag);
> >> +int ele_fw_authenticate(struct device *dev, phys_addr_t addr);
> >> +#endif
> >> diff --git a/drivers/firmware/imx/ele_common.c
> b/drivers/firmware/imx/ele_common.c
> >> new file mode 100644
> >> index 000000000000..dcf7f9034653
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/ele_common.c
> >> @@ -0,0 +1,341 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#include "ele_base_msg.h"
> >> +#include "ele_common.h"
> >> +
> >> +u32 plat_add_msg_crc(u32 *msg, u32 msg_len)
> >> +{
> >> + u32 nb_words = msg_len / (u32)sizeof(u32);
> >> + u32 crc = 0;
> >> + u32 i;
> >> +
> >> + for (i = 0; i < nb_words - 1; i++)
> >> + crc ^= *(msg + i);
> >> +
> >> + return crc;
> >> +}
> >> +
> >> +int imx_ele_msg_rcv(struct se_if_priv *priv)
> >> +{
> >> + u32 wait;
> >> + int err;
> >> +
> >> + wait = msecs_to_jiffies(1000);
> >> + if (!wait_for_completion_timeout(&priv->done, wait)) {
> >> + dev_err(priv->dev,
> >> + "Error: wait_for_completion timed out.\n");
> >> + err = -ETIMEDOUT;
> >> + }
> >> +
> >> + mutex_unlock(&priv->se_if_cmd_lock);
> >> + priv->no_dev_ctx_used = false;
> >> +
> >> + return err;
> >> +}
> >> +
> >> +int imx_ele_msg_send(struct se_if_priv *priv, void *mssg)
> >> +{
> >> + bool is_cmd_lock_tobe_taken = false;
> >> + int err;
> >> +
> >> + if (!priv->waiting_rsp_dev || priv->no_dev_ctx_used) {
> >> + is_cmd_lock_tobe_taken = true;
> >> + mutex_lock(&priv->se_if_cmd_lock);
> >> + }
> >> + scoped_guard(mutex, &priv->se_if_lock);
> >> +
> >> + err = mbox_send_message(priv->tx_chan, mssg);
> >> + if (err < 0) {
> >> + dev_err(priv->dev, "Error: mbox_send_message failure.\n");
> >> + if (is_cmd_lock_tobe_taken)
> >> + mutex_unlock(&priv->se_if_cmd_lock);
> >> + return err;
> >> + }
> >> + err = 0;
> >> +
> >> + return err;
> >> +}
> >> +
> >> +int imx_ele_msg_send_rcv(struct se_if_priv *priv, void *mssg)
> >> +{
> >> + int err;
> >> +
> >> + priv->no_dev_ctx_used = true;
> >> + err = imx_ele_msg_send(priv, mssg);
> >> + if (err)
> >> + goto exit;
> >> +
> >> + err = imx_ele_msg_rcv(priv);
> >> +
> >> +exit:
> >> + return err;
> >> +}
> >> +
> >> +int imx_ele_miscdev_msg_rcv(struct se_if_device_ctx *dev_ctx)
> >> +{
> >> + struct se_msg_hdr header = {0};
> >> + int err;
> >> +
> >> + err = wait_event_interruptible(dev_ctx->wq, dev_ctx->pending_hdr !=
> 0);
> >> + if (err)
> >> + dev_err(dev_ctx->dev,
> >> + "%s: Err[0x%x]:Interrupted by signal.\n",
> >> + dev_ctx->miscdev.name, err);
> >> +
> >> + header = *((struct se_msg_hdr *) (&dev_ctx->temp_resp[0]));
> >> +
> >> + if (header.tag == dev_ctx->priv->rsp_tag)
> >> + mutex_unlock(&dev_ctx->priv->se_if_cmd_lock);
> >> +
> >> + return err;
> >> +}
> >> +
> >> +int imx_ele_miscdev_msg_send(struct se_if_device_ctx *dev_ctx,
> >> + void *tx_msg, int tx_msg_sz)
> >> +{
> >> + struct se_if_priv *priv = dev_ctx->priv;
> >> + struct se_msg_hdr header = {0};
> >> + int err;
> >> +
> >> + header = *((struct se_msg_hdr *) tx_msg);
> >> +
> >> + /*
> >> + * Check that the size passed as argument matches the size
> >> + * carried in the message.
> >> + */
> >> + err = header.size << 2;
> >> +
> >> + if (err != tx_msg_sz) {
> >> + err = -EINVAL;
> >> + dev_err(priv->dev,
> >> + "%s: User buffer too small\n",
> >> + dev_ctx->miscdev.name);
> >> + goto exit;
> >> + }
> >> + /* Check the message is valid according to tags */
> >> + if (header.tag == priv->cmd_tag)
> >> + priv->waiting_rsp_dev = dev_ctx;
> >> + else if (header.tag == priv->rsp_tag) {
> >> + /* Check the device context can send the command */
> >> + if (dev_ctx != priv->cmd_receiver_dev) {
> >> + dev_err(priv->dev,
> >> + "%s: Channel not configured to send resp to FW.",
> >> + dev_ctx->miscdev.name);
> >> + err = -EPERM;
> >> + goto exit;
> >> + }
> >> + } else {
> >> + dev_err(priv->dev,
> >> + "%s: The message does not have a valid TAG\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EINVAL;
> >> + goto exit;
> >> + }
> >> + err = imx_ele_msg_send(priv, tx_msg);
> >> +exit:
> >> + return err;
> >> +}
> >> +
> >> +/*
> >> + * Callback called by mailbox FW, when data is received.
> >> + */
> >> +void se_if_rx_callback(struct mbox_client *mbox_cl, void *msg)
> >> +{
> >> + struct device *dev = mbox_cl->dev;
> >> + struct se_if_device_ctx *dev_ctx;
> >> + struct se_api_msg *rx_msg;
> >> + bool is_response = false;
> >> + struct se_if_priv *priv;
> >> + struct se_msg_hdr header;
> >> +
> >> + priv = dev_get_drvdata(dev);
> >> + if (!priv) {
> >> + dev_err(dev, "SE-MU Priv data is NULL;");
> >> + return;
> >> + }
> >> +
> >> + /* The function can be called with NULL msg */
> >> + if (!msg) {
> >> + dev_err(dev, "Message is invalid\n");
> >> + return;
> >> + }
> >> +
> >> + header.tag = ((u8 *)msg)[TAG_OFFSET];
> >> + header.command = ((u8 *)msg)[CMD_OFFSET];
> >> + header.size = ((u8 *)msg)[SZ_OFFSET];
> >> + header.ver = ((u8 *)msg)[VER_OFFSET];
> >> +
> >> + /* Incoming command: wake up the receiver if any. */
> >> + if (header.tag == priv->cmd_tag) {
> >> + dev_dbg(dev, "Selecting cmd receiver\n");
> >> + dev_ctx = priv->cmd_receiver_dev;
> >> + } else if (header.tag == priv->rsp_tag) {
> >> + if (priv->waiting_rsp_dev) {
> >> + dev_dbg(dev, "Selecting rsp waiter\n");
> >> + dev_ctx = priv->waiting_rsp_dev;
> >> + is_response = true;
> >> + } else {
> >> + /*
> >> + * Reading the EdgeLock Enclave response
> >> + * to the command, sent by other
> >> + * linux kernel services.
> >> + */
> >> + spin_lock(&priv->lock);
> >> + memcpy(&priv->rx_msg, msg, header.size << 2);
> >> +
> >> + complete(&priv->done);
> >> + spin_unlock(&priv->lock);
> >> + return;
> >> + }
> >> + } else {
> >> + dev_err(dev, "Failed to select a device for message: %.8x\n",
> >> + *((u32 *) &header));
> >> + return;
> >> + }
> >> + /* Init reception */
> >> + rx_msg = kzalloc(header.size << 2, GFP_KERNEL);
> >> + if (rx_msg)
> >> + memcpy(rx_msg, msg, header.size << 2);
> >> +
> >> + dev_ctx->temp_resp = (u32 *)rx_msg;
> >> + dev_ctx->temp_resp_size = header.size;
> >> +
> >> + /* Allow user to read */
> >> + dev_ctx->pending_hdr = 1;
> >> + wake_up_interruptible(&dev_ctx->wq);
> >> +
> >> + if (is_response)
> >> + priv->waiting_rsp_dev = NULL;
> >> +}
> >> +
> >> +int validate_rsp_hdr(struct se_if_priv *priv, u32 header,
> >> + uint8_t msg_id, uint8_t sz, bool is_base_api)
> >> +{
> >> + int ret = -EINVAL;
> >> + u32 size;
> >> + u32 cmd;
> >> + u32 tag;
> >> + u32 ver;
> >> +
> >> + tag = MSG_TAG(header);
> >> + cmd = MSG_COMMAND(header);
> >> + size = MSG_SIZE(header);
> >> + ver = MSG_VER(header);
> >> +
> >> + do {
> >> + if (tag != priv->rsp_tag) {
> >> + dev_err(priv->dev,
> >> + "MSG[0x%x] Hdr: Resp tag mismatch. (0x%x != 0x%x)",
> >> + msg_id, tag, priv->rsp_tag);
> >> + break;
> >> + }
> >> +
> >> + if (cmd != msg_id) {
> >> + dev_err(priv->dev,
> >> + "MSG Header: Cmd id mismatch. (0x%x != 0x%x)",
> >> + cmd, msg_id);
> >> + break;
> >> + }
> >> +
> >> + if (size != (sz >> 2)) {
> >> + dev_err(priv->dev,
> >> + "MSG[0x%x] Hdr: Cmd size mismatch. (0x%x != 0x%x)",
> >> + msg_id, size, (sz >> 2));
> >> + break;
> >> + }
> >> +
> >> + if (is_base_api && (ver != priv->base_api_ver)) {
> >> + dev_err(priv->dev,
> >> + "MSG[0x%x] Hdr: Base API Vers mismatch. (0x%x !=
> 0x%x)",
> >> + msg_id, ver, priv->base_api_ver);
> >> + break;
> >> + } else if (!is_base_api && ver != priv->fw_api_ver) {
> >> + dev_err(priv->dev,
> >> + "MSG[0x%x] Hdr: FW API Vers mismatch. (0x%x != 0x%x)",
> >> + msg_id, ver, priv->fw_api_ver);
> >> + break;
> >> + }
> >> +
> >> + ret = 0;
> >> +
> >> + } while (false);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int se_save_imem_state(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + int ret;
> >> +
> >> + /* EXPORT command will save encrypted IMEM to given address,
> >> + * so later in resume, IMEM can be restored from the given
> >> + * address.
> >> + *
> >> + * Size must be at least 64 kB.
> >> + */
> >> + ret = ele_service_swap(dev,
> >> + priv->imem.phyaddr,
> >> + ELE_IMEM_SIZE,
> >> + ELE_IMEM_EXPORT);
> >> + if (ret < 0)
> >> + dev_err(dev, "Failed to export IMEM\n");
> >> + else
> >> + dev_info(dev,
> >> + "Exported %d bytes of encrypted IMEM\n",
> >> + ret);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int se_restore_imem_state(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct soc_info s_info;
> >> + int ret;
> >> +
> >> + /* get info from ELE */
> >> + ret = ele_get_info(dev, &s_info);
> >> + if (ret) {
> >> + dev_err(dev, "Failed to get info from ELE.\n");
> >> + return ret;
> >> + }
> >> +
> >> + /* Get IMEM state, if 0xFE then import IMEM */
> >> + if (s_info.imem_state == ELE_IMEM_STATE_BAD) {
> >> + /* IMPORT command will restore IMEM from the given
> >> + * address, here size is the actual size returned by ELE
> >> + * during the export operation
> >> + */
> >> + ret = ele_service_swap(dev,
> >> + priv->imem.phyaddr,
> >> + priv->imem.size,
> >> + ELE_IMEM_IMPORT);
> >> + if (ret) {
> >> + dev_err(dev, "Failed to import IMEM\n");
> >> + goto exit;
> >> + }
> >> + } else
> >> + goto exit;
> >> +
> >> + /* After importing IMEM, check if IMEM state is equal to 0xCA
> >> + * to ensure IMEM is fully loaded and
> >> + * ELE functionality can be used.
> >> + */
> >> + ret = ele_get_info(dev, &s_info);
> >> + if (ret) {
> >> + dev_err(dev, "Failed to get info from ELE.\n");
> >> + goto exit;
> >> + }
> >> +
> >> + if (s_info.imem_state == ELE_IMEM_STATE_OK)
> >> + dev_info(dev, "Successfully restored IMEM\n");
> >> + else
> >> + dev_err(dev, "Failed to restore IMEM\n");
> >> +
> >> +exit:
> >> + return ret;
> >> +}
> >> diff --git a/drivers/firmware/imx/ele_common.h
> b/drivers/firmware/imx/ele_common.h
> >> new file mode 100644
> >> index 000000000000..6e3a2114bb56
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/ele_common.h
> >> @@ -0,0 +1,43 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +
> >> +#ifndef __ELE_COMMON_H__
> >> +#define __ELE_COMMON_H__
> >> +
> >> +#include "se_ctrl.h"
> >> +
> >> +#define IMX_ELE_FW_DIR "imx/ele/"
> >> +
> >> +uint32_t plat_add_msg_crc(uint32_t *msg, uint32_t msg_len);
> >> +int imx_ele_miscdev_msg_rcv(struct se_if_device_ctx *priv);
> >> +int imx_ele_miscdev_msg_send(struct se_if_device_ctx *dev_ctx,
> >> + void *tx_msg, int tx_msg_sz);
> >> +int imx_ele_msg_rcv(struct se_if_priv *priv);
> >> +int imx_ele_msg_send(struct se_if_priv *priv, void *mssg);
> >> +int imx_ele_msg_send_rcv(struct se_if_priv *priv, void *mssg);
> >> +void se_if_rx_callback(struct mbox_client *mbox_cl, void *msg);
> >> +int validate_rsp_hdr(struct se_if_priv *priv, unsigned int header,
> >> + u8 msg_id, u8 sz, bool is_base_api);
> >> +
> >> +/* Fill a command message header with a given command ID and length
> in bytes. */
> >> +static inline int plat_fill_cmd_msg_hdr(struct se_if_priv *priv,
> >> + struct se_msg_hdr *hdr,
> >> + u8 cmd,
> >> + u32 len,
> >> + bool is_base_api)
> >> +{
> >> + hdr->tag = priv->cmd_tag;
> >> + hdr->ver = (is_base_api) ? priv->base_api_ver : priv->fw_api_ver;
> >> + hdr->command = cmd;
> >> + hdr->size = len >> 2;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +int se_save_imem_state(struct device *dev);
> >> +int se_restore_imem_state(struct device *dev);
> >> +
> >> +#endif /*__ELE_COMMON_H__ */
> >> diff --git a/drivers/firmware/imx/se_ctrl.c
> b/drivers/firmware/imx/se_ctrl.c
> >> new file mode 100644
> >> index 000000000000..11c5eaa7353f
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/se_ctrl.c
> >> @@ -0,0 +1,1339 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#include <linux/completion.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/dev_printk.h>
> >> +#include <linux/dma-mapping.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/export.h>
> >> +#include <linux/firmware.h>
> >> +#include <linux/firmware/imx/se_api.h>
> >> +#include <linux/genalloc.h>
> >> +#include <linux/init.h>
> >> +#include <linux/io.h>
> >> +#include <linux/miscdevice.h>
> >> +#include <linux/mod_devicetable.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of_platform.h>
> >> +#include <linux/of_reserved_mem.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/string.h>
> >> +#include <linux/sys_soc.h>
> >> +#include <uapi/linux/se_ioctl.h>
> >> +
> >> +#include "ele_base_msg.h"
> >> +#include "ele_common.h"
> >> +#include "se_ctrl.h"
> >> +
> >> +#define RESERVED_DMA_POOL BIT(1)
> >> +
> >> +struct imx_se_node_info {
> >> + u8 se_if_id;
> >> + u8 se_if_did;
> >> + u8 max_dev_ctx;
> >> + u8 cmd_tag;
> >> + u8 rsp_tag;
> >> + u8 success_tag;
> >> + u8 base_api_ver;
> >> + u8 fw_api_ver;
> >> + u8 *se_name;
> >> + u8 *mbox_tx_name;
> >> + u8 *mbox_rx_name;
> >> + u8 *pool_name;
> >> + u8 *fw_name_in_rfs;
> >> + bool soc_register;
> >> + bool reserved_dma_ranges;
> >> + bool imem_mgmt;
> >> +};
> >> +
> >> +struct imx_se_node_info_list {
> >> + u8 num_mu;
> >> + u16 soc_id;
> >> + u16 soc_rev;
> >> + struct imx_se_node_info info[];
> >> +};
> >> +
> >> +static const struct imx_se_node_info_list imx8ulp_info = {
> >> + .num_mu = 1,
> >> + .soc_id = SOC_ID_OF_IMX8ULP,
> >> + .info = {
> >> + {
> >> + .se_if_id = 2,
> >> + .se_if_did = 7,
> >> + .max_dev_ctx = 4,
> >> + .cmd_tag = 0x17,
> >> + .rsp_tag = 0xe1,
> >> + .success_tag = 0xd6,
> >> + .base_api_ver = MESSAGING_VERSION_6,
> >> + .fw_api_ver = MESSAGING_VERSION_7,
> >> + .se_name = "hsm1",
> >> + .mbox_tx_name = "tx",
> >> + .mbox_rx_name = "rx",
> >> + .pool_name = "sram",
> >> + .fw_name_in_rfs = IMX_ELE_FW_DIR\
> >> + "mx8ulpa2ext-ahab-container.img",
> >> + .soc_register = true,
> >> + .reserved_dma_ranges = true,
> >> + .imem_mgmt = true,
> >> + },
> >> + },
> >> +};
> >> +
> >> +static const struct imx_se_node_info_list imx93_info = {
> >> + .num_mu = 1,
> >> + .soc_id = SOC_ID_OF_IMX93,
> >> + .info = {
> >> + {
> >> + .se_if_id = 2,
> >> + .se_if_did = 3,
> >> + .max_dev_ctx = 4,
> >> + .cmd_tag = 0x17,
> >> + .rsp_tag = 0xe1,
> >> + .success_tag = 0xd6,
> >> + .base_api_ver = MESSAGING_VERSION_6,
> >> + .fw_api_ver = MESSAGING_VERSION_7,
> >> + .se_name = "hsm1",
> >> + .mbox_tx_name = "tx",
> >> + .mbox_rx_name = "rx",
> >> + .reserved_dma_ranges = true,
> >> + .imem_mgmt = true,
> >> + .soc_register = true,
> >> + },
> >> + },
> >> +};
> >> +
> >> +static const struct of_device_id se_match[] = {
> >> + { .compatible = "fsl,imx8ulp-ele", .data = (void *)&imx8ulp_info},
> >> + { .compatible = "fsl,imx93-ele", .data = (void *)&imx93_info},
> >> + {},
> >> +};
> >> +
> >> +static struct imx_se_node_info
> >> + *get_imx_se_node_info(struct imx_se_node_info_list *info_list,
> >> + const u32 idx)
> >> +{
> >> + if (idx < 0 || idx > info_list->num_mu)
> >> + return NULL;
> >> +
> >> + return &info_list->info[idx];
> >> +}
> >> +
> >> +void *get_phy_buf_mem_pool(struct device *dev,
> >> + u8 *mem_pool_name,
> >> + dma_addr_t *buf,
> >> + u32 size)
> >> +{
> >> + struct device_node *of_node = dev->of_node;
> >> + struct gen_pool *mem_pool;
> >> +
> >> + mem_pool = of_gen_pool_get(of_node, mem_pool_name, 0);
> >> + if (!mem_pool) {
> >> + dev_err(dev,
> >> + "Unable to get sram pool = %s\n",
> >> + mem_pool_name);
> >> + return 0;
> >> + }
> >> +
> >> + return gen_pool_dma_alloc(mem_pool, size, buf);
> >> +}
> >> +
> >> +void free_phybuf_mem_pool(struct device *dev,
> >> + u8 *mem_pool_name,
> >> + u32 *buf,
> >> + u32 size)
> >> +{
> >> + struct device_node *of_node = dev->of_node;
> >> + struct gen_pool *mem_pool;
> >> +
> >> + mem_pool = of_gen_pool_get(of_node, mem_pool_name, 0);
> >> + if (!mem_pool)
> >> + dev_err(dev,
> >> + "%s: Failed: Unable to get sram pool.\n",
> >> + __func__);
> >> +
> >> + gen_pool_free(mem_pool, (u64)buf, size);
> >> +}
> >> +
> >> +static int imx_fetch_soc_info(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + struct imx_se_node_info_list *info_list;
> >> + const struct imx_se_node_info *info;
> >> + struct soc_device_attribute *attr;
> >> + struct soc_device *sdev;
> >> + struct soc_info s_info;
> >> + int err = 0;
> >> +
> >> + info = priv->info;
> >> + info_list = (struct imx_se_node_info_list *)
> >> + device_get_match_data(dev->parent);
> >> + if (info_list->soc_rev)
> >> + return err;
> >> +
> >> + err = ele_get_info(dev, &s_info);
> >> + if (err)
> >> + s_info.major_ver = DEFAULT_IMX_SOC_VER;
> >> +
> >> + info_list->soc_rev = s_info.soc_rev;
> >> +
> >> + if (!info->soc_register)
> >> + return 0;
> >> +
> >> + attr = devm_kzalloc(dev, sizeof(*attr), GFP_KERNEL);
> >> + if (!attr)
> >> + return -ENOMEM;
> >> +
> >> + if (s_info.minor_ver)
> >> + attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%x.%x",
> >> + s_info.major_ver,
> >> + s_info.minor_ver);
> >> + else
> >> + attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%x",
> >> + s_info.major_ver);
> >> +
> >> + switch (s_info.soc_id) {
> >> + case SOC_ID_OF_IMX8ULP:
> >> + attr->soc_id = devm_kasprintf(dev, GFP_KERNEL,
> >> + "i.MX8ULP");
> >> + break;
> >> + case SOC_ID_OF_IMX93:
> >> + attr->soc_id = devm_kasprintf(dev, GFP_KERNEL,
> >> + "i.MX93");
> >> + break;
> >> + }
> >> +
> >> + err = of_property_read_string(of_root, "model",
> >> + &attr->machine);
> >> + if (err) {
> >> + devm_kfree(dev, attr);
> >> + return -EINVAL;
> >> + }
> >> + attr->family = devm_kasprintf(dev, GFP_KERNEL, "Freescale i.MX");
> >> +
> >> + attr->serial_number
> >> + = devm_kasprintf(dev, GFP_KERNEL, "%016llX", s_info.serial_num);
> >> +
> >> + sdev = soc_device_register(attr);
> >> + if (IS_ERR(sdev)) {
> >> + devm_kfree(dev, attr->soc_id);
> >> + devm_kfree(dev, attr->serial_number);
> >> + devm_kfree(dev, attr->revision);
> >> + devm_kfree(dev, attr->family);
> >> + devm_kfree(dev, attr->machine);
> >> + devm_kfree(dev, attr);
> >> + return PTR_ERR(sdev);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +/*
> >> + * File operations for user-space
> >> + */
> >> +
> >> +/* Write a message to the MU. */
> >> +static ssize_t se_if_fops_write(struct file *fp, const char __user *buf,
> >> + size_t size, loff_t *ppos)
> >> +{
> >> + struct se_api_msg *tx_msg __free(kfree);
> >> + struct se_if_device_ctx *dev_ctx;
> >> + struct se_if_priv *priv;
> >> + int err;
> >> +
> >> + dev_ctx = container_of(fp->private_data,
> >> + struct se_if_device_ctx,
> >> + miscdev);
> >> + priv = dev_ctx->priv;
> >> + dev_dbg(priv->dev,
> >> + "%s: write from buf (%p)%zu, ppos=%lld\n",
> >> + dev_ctx->miscdev.name,
> >> + buf, size, ((ppos) ? *ppos : 0));
> >> +
> >> + if (down_interruptible(&dev_ctx->fops_lock))
> >> + return -EBUSY;
> >> +
> >> + if (dev_ctx->status != MU_OPENED) {
> >> + err = -EINVAL;
> >> + goto exit;
> >> + }
> >> +
> >> + if (size < SE_MU_HDR_SZ) {
> >> + dev_err(priv->dev,
> >> + "%s: User buffer too small(%zu < %d)\n",
> >> + dev_ctx->miscdev.name,
> >> + size, SE_MU_HDR_SZ);
> >> + err = -ENOSPC;
> >> + goto exit;
> >> + }
> >> +
> >> + tx_msg = memdup_user((void __user *)ppos, size);
> >> + if (!tx_msg) {
> >> + err = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> + /* Copy data to buffer */
> >> + if (copy_from_user(tx_msg, buf, size)) {
> >> + err = -EFAULT;
> >> + dev_err(priv->dev,
> >> + "%s: Fail copy message from user\n",
> >> + dev_ctx->miscdev.name);
> >> + goto exit;
> >> + }
> >> +
> >> + print_hex_dump_debug("from user ", DUMP_PREFIX_OFFSET, 4, 4,
> >> + tx_msg, size, false);
> >> +
> >> + err = imx_ele_miscdev_msg_send(dev_ctx, tx_msg, size);
> >> +
> >> +exit:
> >> + up(&dev_ctx->fops_lock);
> >> + return err;
> >> +}
> >> +
> >> +/*
> >> + * Read a message from the MU.
> >> + * Blocking until a message is available.
> >> + */
> >> +static ssize_t se_if_fops_read(struct file *fp, char __user *buf,
> >> + size_t size, loff_t *ppos)
> >> +{
> >> + struct se_if_device_ctx *dev_ctx;
> >> + struct se_buf_desc *b_desc;
> >> + struct se_if_priv *priv;
> >> + u32 size_to_copy;
> >> + int err;
> >> +
> >> + dev_ctx = container_of(fp->private_data,
> >> + struct se_if_device_ctx,
> >> + miscdev);
> >> + priv = dev_ctx->priv;
> >> + dev_dbg(priv->dev,
> >> + "%s: read to buf %p(%zu), ppos=%lld\n",
> >> + dev_ctx->miscdev.name,
> >> + buf, size, ((ppos) ? *ppos : 0));
> >> +
> >> + if (down_interruptible(&dev_ctx->fops_lock))
> >> + return -EBUSY;
> >> +
> >> + if (dev_ctx->status != MU_OPENED) {
> >> + err = -EINVAL;
> >> + goto exit;
> >> + }
> >> +
> >> + err = imx_ele_miscdev_msg_rcv(dev_ctx);
> >> + if (err)
> >> + goto exit;
> >> +
> >> + /* Buffer containing the message from FW, is
> >> + * allocated in callback function.
> >> + * Check if buffer allocation failed.
> >> + */
> >> + if (!dev_ctx->temp_resp) {
> >> + err = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> + dev_dbg(priv->dev,
> >> + "%s: %s %s\n",
> >> + dev_ctx->miscdev.name,
> >> + __func__,
> >> + "message received, start transmit to user");
> >> +
> >> + /*
> >> + * Check that the size passed as argument is larger than
> >> + * the one carried in the message.
> >> + */
> >> + size_to_copy = dev_ctx->temp_resp_size << 2;
> >> + if (size_to_copy > size) {
> >> + dev_dbg(priv->dev,
> >> + "%s: User buffer too small (%zu < %d)\n",
> >> + dev_ctx->miscdev.name,
> >> + size, size_to_copy);
> >> + size_to_copy = size;
> >> + }
> >> +
> >> + /*
> >> + * We may need to copy the output data to user before
> >> + * delivering the completion message.
> >> + */
> >> + while (!list_empty(&dev_ctx->pending_out)) {
> >> + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> >> + struct se_buf_desc,
> >> + link);
> >> + if (!b_desc)
> >> + continue;
> >> +
> >> + if (b_desc->usr_buf_ptr && b_desc->shared_buf_ptr) {
> >> +
> >> + dev_dbg(priv->dev,
> >> + "%s: Copy output data to user\n",
> >> + dev_ctx->miscdev.name);
> >> + if (copy_to_user(b_desc->usr_buf_ptr,
> >> + b_desc->shared_buf_ptr,
> >> + b_desc->size)) {
> >> + dev_err(priv->dev,
> >> + "%s: Failure copying output data to user.",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> + }
> >> +
> >> + if (b_desc->shared_buf_ptr)
> >> + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> >> +
> >> + __list_del_entry(&b_desc->link);
> >> + kfree(b_desc);
> >> + }
> >> +
> >> + /* Copy data from the buffer */
> >> + print_hex_dump_debug("to user ", DUMP_PREFIX_OFFSET, 4, 4,
> >> + dev_ctx->temp_resp, size_to_copy, false);
> >> + if (copy_to_user(buf, dev_ctx->temp_resp, size_to_copy)) {
> >> + dev_err(priv->dev,
> >> + "%s: Failed to copy to user\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> + err = size_to_copy;
> >> + kfree(dev_ctx->temp_resp);
> >> +
> >> + /* free memory allocated on the shared buffers. */
> >> + dev_ctx->secure_mem.pos = 0;
> >> + dev_ctx->non_secure_mem.pos = 0;
> >> +
> >> + dev_ctx->pending_hdr = 0;
> >> +
> >> +exit:
> >> + /*
> >> + * Clean the used Shared Memory space,
> >> + * whether its Input Data copied from user buffers, or
> >> + * Data received from FW.
> >> + */
> >> + while (!list_empty(&dev_ctx->pending_in) ||
> >> + !list_empty(&dev_ctx->pending_out)) {
> >> + if (!list_empty(&dev_ctx->pending_in))
> >> + b_desc = list_first_entry_or_null(&dev_ctx->pending_in,
> >> + struct se_buf_desc,
> >> + link);
> >> + else
> >> + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> >> + struct se_buf_desc,
> >> + link);
> >> +
> >> + if (!b_desc)
> >> + continue;
> >> +
> >> + if (b_desc->shared_buf_ptr)
> >> + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> >> +
> >> + __list_del_entry(&b_desc->link);
> >> + kfree(b_desc);
> >> + }
> >> +
> >> + up(&dev_ctx->fops_lock);
> >> + return err;
> >> +}
> >> +
> >> +/* Give access to EdgeLock Enclave, to the memory we want to share */
> >> +static int se_if_setup_se_mem_access(struct se_if_device_ctx *dev_ctx,
> >> + u64 addr, u32 len)
> >> +{
> >> + /* Assuming EdgeLock Enclave has access to all the memory regions */
> >> + int ret = 0;
> >> +
> >> + if (ret) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Fail find memreg\n", dev_ctx->miscdev.name);
> >> + goto exit;
> >> + }
> >> +
> >> + if (ret) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Fail set permission for resource\n",
> >> + dev_ctx->miscdev.name);
> >> + goto exit;
> >> + }
> >> +
> >> +exit:
> >> + return ret;
> >> +}
> >> +
> >> +static int se_ioctl_get_mu_info(struct se_if_device_ctx *dev_ctx,
> >> + u64 arg)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev_ctx->dev);
> >> + struct imx_se_node_info *if_node_info;
> >> + struct se_ioctl_get_if_info info;
> >> + int err = 0;
> >> +
> >> + if_node_info = (struct imx_se_node_info *)priv->info;
> >> +
> >> + info.se_if_id = if_node_info->se_if_id;
> >> + info.interrupt_idx = 0;
> >> + info.tz = 0;
> >> + info.did = if_node_info->se_if_did;
> >> + info.cmd_tag = if_node_info->cmd_tag;
> >> + info.rsp_tag = if_node_info->rsp_tag;
> >> + info.success_tag = if_node_info->success_tag;
> >> + info.base_api_ver = if_node_info->base_api_ver;
> >> + info.fw_api_ver = if_node_info->fw_api_ver;
> >> +
> >> + dev_dbg(priv->dev,
> >> + "%s: info [se_if_id: %d, irq_idx: %d, tz: 0x%x, did: 0x%x]\n",
> >> + dev_ctx->miscdev.name,
> >> + info.se_if_id, info.interrupt_idx, info.tz, info.did);
> >> +
> >> + if (copy_to_user((u8 *)arg, &info, sizeof(info))) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed to copy mu info to user\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> +exit:
> >> + return err;
> >> +}
> >> +
> >> +/*
> >> + * Copy a buffer of data to/from the user and return the address to use in
> >> + * messages
> >> + */
> >> +static int se_ioctl_setup_iobuf_handler(struct se_if_device_ctx *dev_ctx,
> >> + u64 arg)
> >> +{
> >> + struct se_ioctl_setup_iobuf io = {0};
> >> + struct se_shared_mem *shared_mem;
> >> + struct se_buf_desc *b_desc;
> >> + int err = 0;
> >> + u32 pos;
> >> +
> >> + if (copy_from_user(&io, (u8 *)arg, sizeof(io))) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed copy iobuf config from user\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> + dev_dbg(dev_ctx->priv->dev,
> >> + "%s: io [buf: %p(%d) flag: %x]\n",
> >> + dev_ctx->miscdev.name,
> >> + io.user_buf, io.length, io.flags);
> >> +
> >> + if (io.length == 0 || !io.user_buf) {
> >> + /*
> >> + * Accept NULL pointers since some buffers are optional
> >> + * in FW commands. In this case we should return 0 as
> >> + * pointer to be embedded into the message.
> >> + * Skip all data copy part of code below.
> >> + */
> >> + io.ele_addr = 0;
> >> + goto copy;
> >> + }
> >> +
> >> + /* Select the shared memory to be used for this buffer. */
> >> + if (io.flags & SE_MU_IO_FLAGS_USE_SEC_MEM) {
> >> + /* App requires to use secure memory for this buffer.*/
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed allocate SEC MEM memory\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + } else {
> >> + /* No specific requirement for this buffer. */
> >> + shared_mem = &dev_ctx->non_secure_mem;
> >> + }
> >> +
> >> + /* Check there is enough space in the shared memory. */
> >> + if (shared_mem->size < shared_mem->pos
> >> + || io.length >= shared_mem->size - shared_mem->pos) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Not enough space in shared memory\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> + /* Allocate space in shared memory. 8 bytes aligned. */
> >> + pos = shared_mem->pos;
> >> + shared_mem->pos += round_up(io.length, 8u);
> >> + io.ele_addr = (u64)shared_mem->dma_addr + pos;
> >> +
> >> + if ((io.flags & SE_MU_IO_FLAGS_USE_SEC_MEM) &&
> >> + !(io.flags & SE_MU_IO_FLAGS_USE_SHORT_ADDR)) {
> >> + /*Add base address to get full address.*/
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed allocate SEC MEM memory\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> + memset(shared_mem->ptr + pos, 0, io.length);
> >> + if ((io.flags & SE_IO_BUF_FLAGS_IS_INPUT) ||
> >> + (io.flags & SE_IO_BUF_FLAGS_IS_IN_OUT)) {
> >> + /*
> >> + * buffer is input:
> >> + * copy data from user space to this allocated buffer.
> >> + */
> >> + if (copy_from_user(shared_mem->ptr + pos, io.user_buf,
> >> + io.length)) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed copy data to shared memory\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> + }
> >> +
> >> + b_desc = kzalloc(sizeof(*b_desc), GFP_KERNEL);
> >> + if (!b_desc) {
> >> + err = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> +copy:
> >> + /* Provide the EdgeLock Enclave address to user space only if
> success.*/
> >> + if (copy_to_user((u8 *)arg, &io, sizeof(io))) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed to copy iobuff setup to user\n",
> >> + dev_ctx->miscdev.name);
> >> + kfree(b_desc);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> + if (b_desc) {
> >> + b_desc->shared_buf_ptr = shared_mem->ptr + pos;
> >> + b_desc->usr_buf_ptr = io.user_buf;
> >> + b_desc->size = io.length;
> >> +
> >> + if (io.flags & SE_IO_BUF_FLAGS_IS_INPUT) {
> >> + /*
> >> + * buffer is input:
> >> + * add an entry in the "pending input buffers" list so
> >> + * that copied data can be cleaned from shared memory
> >> + * later.
> >> + */
> >> + list_add_tail(&b_desc->link, &dev_ctx->pending_in);
> >> + } else {
> >> + /*
> >> + * buffer is output:
> >> + * add an entry in the "pending out buffers" list so data
> >> + * can be copied to user space when receiving Secure-Enclave
> >> + * response.
> >> + */
> >> + list_add_tail(&b_desc->link, &dev_ctx->pending_out);
> >> + }
> >> + }
> >> +
> >> +exit:
> >> + return err;
> >> +}
> >> +
> >> +/* IOCTL to provide SoC information */
> >> +static int se_ioctl_get_soc_info_handler(struct se_if_device_ctx
> *dev_ctx,
> >> + u64 arg)
> >> +{
> >> + struct imx_se_node_info_list *info_list;
> >> + struct se_ioctl_get_soc_info soc_info;
> >> + int err = -EINVAL;
> >> +
> >> + info_list = (struct imx_se_node_info_list *)
> >> + device_get_match_data(dev_ctx->priv->dev->parent);
> >> + if (!info_list)
> >> + goto exit;
> >> +
> >> + soc_info.soc_id = info_list->soc_id;
> >> + soc_info.soc_rev = info_list->soc_rev;
> >> +
> >> + err = (int)copy_to_user((u8 *)arg, (u8 *)(&soc_info), sizeof(soc_info));
> >> + if (err) {
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed to copy soc info to user\n",
> >> + dev_ctx->miscdev.name);
> >> + err = -EFAULT;
> >> + goto exit;
> >> + }
> >> +
> >> +exit:
> >> + return err;
> >> +}
> >> +
> >> +/* Open a character device. */
> >> +static int se_if_fops_open(struct inode *nd, struct file *fp)
> >> +{
> >> + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> >> + struct se_if_device_ctx,
> >> + miscdev);
> >> + int err;
> >> +
> >> + /* Avoid race if opened at the same time */
> >> + if (down_trylock(&dev_ctx->fops_lock))
> >> + return -EBUSY;
> >> +
> >> + /* Authorize only 1 instance. */
> >> + if (dev_ctx->status != MU_FREE) {
> >> + err = -EBUSY;
> >> + goto exit;
> >> + }
> >> +
> >> + /*
> >> + * Allocate some memory for data exchanges with S40x.
> >> + * This will be used for data not requiring secure memory.
> >> + */
> >> + dev_ctx->non_secure_mem.ptr = dmam_alloc_coherent(dev_ctx->dev,
> >> + MAX_DATA_SIZE_PER_USER,
> >> + &dev_ctx->non_secure_mem.dma_addr,
> >> + GFP_KERNEL);
> >> + if (!dev_ctx->non_secure_mem.ptr) {
> >> + err = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> + err = se_if_setup_se_mem_access(dev_ctx,
> >> + dev_ctx->non_secure_mem.dma_addr,
> >> + MAX_DATA_SIZE_PER_USER);
> >> + if (err) {
> >> + err = -EPERM;
> >> + dev_err(dev_ctx->priv->dev,
> >> + "%s: Failed to share access to shared memory\n",
> >> + dev_ctx->miscdev.name);
> >> + goto free_coherent;
> >> + }
> >> +
> >> + dev_ctx->non_secure_mem.size = MAX_DATA_SIZE_PER_USER;
> >> + dev_ctx->non_secure_mem.pos = 0;
> >> + dev_ctx->status = MU_OPENED;
> >> +
> >> + dev_ctx->pending_hdr = 0;
> >> +
> >> + goto exit;
> >> +
> >> +free_coherent:
> >> + dmam_free_coherent(dev_ctx->priv->dev,
> MAX_DATA_SIZE_PER_USER,
> >> + dev_ctx->non_secure_mem.ptr,
> >> + dev_ctx->non_secure_mem.dma_addr);
> >> +
> >> +exit:
> >> + up(&dev_ctx->fops_lock);
> >> + return err;
> >> +}
> >> +
> >> +/* Close a character device. */
> >> +static int se_if_fops_close(struct inode *nd, struct file *fp)
> >> +{
> >> + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> >> + struct se_if_device_ctx,
> >> + miscdev);
> >> + struct se_if_priv *priv = dev_ctx->priv;
> >> + struct se_buf_desc *b_desc;
> >> +
> >> + /* Avoid race if closed at the same time */
> >> + if (down_trylock(&dev_ctx->fops_lock))
> >> + return -EBUSY;
> >> +
> >> + /* The device context has not been opened */
> >> + if (dev_ctx->status != MU_OPENED)
> >> + goto exit;
> >> +
> >> + /* check if this device was registered as command receiver. */
> >> + if (priv->cmd_receiver_dev == dev_ctx)
> >> + priv->cmd_receiver_dev = NULL;
> >> +
> >> + /* check if this device was registered as waiting response. */
> >> + if (priv->waiting_rsp_dev == dev_ctx) {
> >> + priv->waiting_rsp_dev = NULL;
> >> + mutex_unlock(&priv->se_if_cmd_lock);
> >> + }
> >> +
> >> + /* Unmap secure memory shared buffer. */
> >> + if (dev_ctx->secure_mem.ptr)
> >> + devm_iounmap(dev_ctx->dev, dev_ctx->secure_mem.ptr);
> >> +
> >> + dev_ctx->secure_mem.ptr = NULL;
> >> + dev_ctx->secure_mem.dma_addr = 0;
> >> + dev_ctx->secure_mem.size = 0;
> >> + dev_ctx->secure_mem.pos = 0;
> >> +
> >> + /* Free non-secure shared buffer. */
> >> + dmam_free_coherent(dev_ctx->priv->dev,
> MAX_DATA_SIZE_PER_USER,
> >> + dev_ctx->non_secure_mem.ptr,
> >> + dev_ctx->non_secure_mem.dma_addr);
> >> +
> >> + dev_ctx->non_secure_mem.ptr = NULL;
> >> + dev_ctx->non_secure_mem.dma_addr = 0;
> >> + dev_ctx->non_secure_mem.size = 0;
> >> + dev_ctx->non_secure_mem.pos = 0;
> >> +
> >> + while (!list_empty(&dev_ctx->pending_in) ||
> >> + !list_empty(&dev_ctx->pending_out)) {
> >> + if (!list_empty(&dev_ctx->pending_in))
> >> + b_desc = list_first_entry_or_null(&dev_ctx->pending_in,
> >> + struct se_buf_desc,
> >> + link);
> >> + else
> >> + b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
> >> + struct se_buf_desc,
> >> + link);
> >> +
> >> + if (!b_desc)
> >> + continue;
> >> +
> >> + if (b_desc->shared_buf_ptr)
> >> + memset(b_desc->shared_buf_ptr, 0, b_desc->size);
> >> +
> >> + __list_del_entry(&b_desc->link);
> >> + devm_kfree(dev_ctx->dev, b_desc);
> >> + }
> >> +
> >> + dev_ctx->status = MU_FREE;
> >> +
> >> +exit:
> >> + up(&dev_ctx->fops_lock);
> >> + return 0;
> >> +}
> >> +
> >> +/* IOCTL entry point of a character device */
> >> +static long se_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> >> +//static long se_ioctl(struct file *fp, u32 cmd, u64 arg)
> >> +{
> >> + struct se_if_device_ctx *dev_ctx = container_of(fp->private_data,
> >> + struct se_if_device_ctx,
> >> + miscdev);
> >> + struct se_if_priv *se_if_priv = dev_ctx->priv;
> >> + int err = -EINVAL;
> >> +
> >> + /* Prevent race during change of device context */
> >> + if (down_interruptible(&dev_ctx->fops_lock))
> >> + return -EBUSY;
> >> +
> >> + switch (cmd) {
> >> + case SE_IOCTL_ENABLE_CMD_RCV:
> >> + if (!se_if_priv->cmd_receiver_dev) {
> >> + se_if_priv->cmd_receiver_dev = dev_ctx;
> >> + err = 0;
> >> + }
> >> + break;
> >> + case SE_IOCTL_GET_MU_INFO:
> >> + err = se_ioctl_get_mu_info(dev_ctx, arg);
> >> + break;
> >> + case SE_IOCTL_SETUP_IOBUF:
> >> + err = se_ioctl_setup_iobuf_handler(dev_ctx, arg);
> >> + break;
> >> + case SE_IOCTL_GET_SOC_INFO:
> >> + err = se_ioctl_get_soc_info_handler(dev_ctx, arg);
> >> + break;
> >> +
> >> + default:
> >> + err = -EINVAL;
> >> + dev_dbg(se_if_priv->dev,
> >> + "%s: IOCTL %.8x not supported\n",
> >> + dev_ctx->miscdev.name,
> >> + cmd);
> >> + }
> >> +
> >> + up(&dev_ctx->fops_lock);
> >> + return (long)err;
> >> +}
> >> +
> >> +/* Char driver setup */
> >> +static const struct file_operations se_if_fops = {
> >> + .open = se_if_fops_open,
> >> + .owner = THIS_MODULE,
> >> + .release = se_if_fops_close,
> >> + .unlocked_ioctl = se_ioctl,
> >> + .read = se_if_fops_read,
> >> + .write = se_if_fops_write,
> >> +};
> >> +
> >> +/* interface for managed res to free a mailbox channel */
> >> +static void if_mbox_free_channel(void *mbox_chan)
> >> +{
> >> + mbox_free_channel(mbox_chan);
> >> +}
> >> +
> >> +/* interface for managed res to unregister a character device */
> >> +static void if_misc_deregister(void *miscdevice)
> >> +{
> >> + misc_deregister(miscdevice);
> >> +}
> >> +
> >> +static int se_if_request_channel(struct device *dev,
> >> + struct mbox_chan **chan,
> >> + struct mbox_client *cl,
> >> + const u8 *name)
> >> +{
> >> + struct mbox_chan *t_chan;
> >> + int ret = 0;
> >> +
> >> + t_chan = mbox_request_channel_byname(cl, name);
> >> + if (IS_ERR(t_chan)) {
> >> + ret = PTR_ERR(t_chan);
> >> + if (ret != -EPROBE_DEFER)
> >> + dev_err(dev,
> >> + "Failed to request chan %s ret %d\n", name,
> >> + ret);
> >> + goto exit;
> >> + }
> >> +
> >> + ret = devm_add_action(dev, if_mbox_free_channel, t_chan);
> >> + if (ret) {
> >> + dev_err(dev, "failed to add devm removal of mbox %s\n", name);
> >> + goto exit;
> >> + }
> >> +
> >> + *chan = t_chan;
> >> +
> >> +exit:
> >> + return ret;
> >> +}
> >> +
> >> +static int se_probe_if_cleanup(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct se_if_priv *priv;
> >> + int ret = 0;
> >> + int i;
> >> +
> >> + priv = dev_get_drvdata(dev);
> >> + if (!priv) {
> >> + ret = 0;
> >> + dev_dbg(dev, "SE-MU Priv data is NULL;");
> >> + return ret;
> >> + }
> >> +
> >> + if (priv->tx_chan)
> >> + mbox_free_channel(priv->tx_chan);
> >> + if (priv->rx_chan)
> >> + mbox_free_channel(priv->rx_chan);
> >> +
> >> + /* free the buffer in se remove, previously allocated
> >> + * in se probe to store encrypted IMEM
> >> + */
> >> + if (priv->imem.buf) {
> >> + dmam_free_coherent(dev,
> >> + ELE_IMEM_SIZE,
> >> + priv->imem.buf,
> >> + priv->imem.phyaddr);
> >> + priv->imem.buf = NULL;
> >> + }
> >> +
> >> + if (priv->ctxs) {
> >> + for (i = 0; i < priv->max_dev_ctx; i++) {
> >> + if (priv->ctxs[i]) {
> >> + devm_remove_action(dev,
> >> + if_misc_deregister,
> >> + &priv->ctxs[i]->miscdev);
> >> + misc_deregister(&priv->ctxs[i]->miscdev);
> >> + devm_kfree(dev, priv->ctxs[i]);
> >> + }
> >> + }
> >> + devm_kfree(dev, priv->ctxs);
> >> + }
> >> +
> >> + if (priv->flags & RESERVED_DMA_POOL) {
> >> + of_reserved_mem_device_release(dev);
> >> + priv->flags &= (~RESERVED_DMA_POOL);
> >> + }
> >> +
> >> + devm_kfree(dev, priv);
> >> + of_node_put(dev->of_node);
> >> + of_platform_device_destroy(dev, NULL);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int se_probe_cleanup(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct device_node *if_dn;
> >> +
> >> + /* Enumerate se-interface device nodes. */
> >> + for_each_child_of_node(dev->of_node, if_dn) {
> >> + struct platform_device *if_pdev
> >> + = of_find_device_by_node(if_dn);
> >> + if (se_probe_if_cleanup(if_pdev))
> >> + dev_err(dev,
> >> + "Failed to clean-up child node probe.\n");
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int init_device_context(struct device *dev)
> >> +{
> >> + const struct imx_se_node_info *info;
> >> + struct se_if_device_ctx *dev_ctx;
> >> + struct se_if_priv *priv;
> >> + u8 *devname;
> >> + int ret = 0;
> >> + int i;
> >> +
> >> + priv = dev_get_drvdata(dev);
> >> +
> >> + if (!priv) {
> >> + ret = -EINVAL;
> >> + dev_err(dev, "Invalid SE-MU Priv data");
> >> + return ret;
> >> + }
> >> + info = priv->info;
> >> +
> >> + priv->ctxs = devm_kzalloc(dev, sizeof(dev_ctx) * priv->max_dev_ctx,
> >> + GFP_KERNEL);
> >> +
> >> + if (!priv->ctxs) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + /* Create users */
> >> + for (i = 0; i < priv->max_dev_ctx; i++) {
> >> + dev_ctx = devm_kzalloc(dev, sizeof(*dev_ctx), GFP_KERNEL);
> >> + if (!dev_ctx) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + dev_ctx->dev = dev;
> >> + dev_ctx->status = MU_FREE;
> >> + dev_ctx->priv = priv;
> >> +
> >> + priv->ctxs[i] = dev_ctx;
> >> +
> >> + /* Default value invalid for an header. */
> >> + init_waitqueue_head(&dev_ctx->wq);
> >> +
> >> + INIT_LIST_HEAD(&dev_ctx->pending_out);
> >> + INIT_LIST_HEAD(&dev_ctx->pending_in);
> >> + sema_init(&dev_ctx->fops_lock, 1);
> >> +
> >> + devname = devm_kasprintf(dev, GFP_KERNEL, "%s_ch%d",
> >> + info->se_name, i);
> >> + if (!devname) {
> >> + ret = -ENOMEM;
> >> + return ret;
> >> + }
> >> +
> >> + dev_ctx->miscdev.name = devname;
> >> + dev_ctx->miscdev.minor = MISC_DYNAMIC_MINOR;
> >> + dev_ctx->miscdev.fops = &se_if_fops;
> >> + dev_ctx->miscdev.parent = dev;
> >> + ret = misc_register(&dev_ctx->miscdev);
> >> + if (ret) {
> >> + dev_err(dev, "failed to register misc device %d\n",
> >> + ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = devm_add_action(dev, if_misc_deregister,
> >> + &dev_ctx->miscdev);
> >> + if (ret) {
> >> + dev_err(dev,
> >> + "failed[%d] to add action to the misc-dev\n",
> >> + ret);
> >> + return ret;
> >> + }
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static void se_load_firmware(const struct firmware *fw, void *context)
> >> +{
> >> + struct se_if_priv *priv = (struct se_if_priv *) context;
> >> + const struct imx_se_node_info *info = priv->info;
> >> + const u8 *se_fw_name = info->fw_name_in_rfs;
> >> + phys_addr_t se_fw_phyaddr;
> >> + u8 *se_fw_buf;
> >> +
> >> + if (!fw) {
> >> + if (priv->fw_fail > MAX_FW_LOAD_RETRIES)
> >> + dev_dbg(priv->dev,
> >> + "External FW not found, using ROM FW.\n");
> >> + else {
> >> + /*add a bit delay to wait for firmware priv released */
> >> + msleep(20);
> >> +
> >> + /* Load firmware one more time if timeout */
> >> + request_firmware_nowait(THIS_MODULE,
> >> + FW_ACTION_UEVENT, info->fw_name_in_rfs,
> >> + priv->dev, GFP_KERNEL, priv,
> >> + se_load_firmware);
> >> + priv->fw_fail++;
> >> + dev_dbg(priv->dev, "Value of retries = 0x%x.\n",
> >> + priv->fw_fail);
> >> + }
> >> +
> >> + return;
> >> + }
> >> +
> >> + /* allocate buffer to store the SE FW */
> >> + se_fw_buf = dmam_alloc_coherent(priv->dev, fw->size,
> >> + &se_fw_phyaddr,
> >> + GFP_KERNEL);
> >> + if (!se_fw_buf) {
> >> + dev_err(priv->dev, "Failed to alloc SE fw buffer memory\n");
> >> + goto exit;
> >> + }
> >> +
> >> + memcpy(se_fw_buf, fw->data, fw->size);
> >> +
> >> + if (ele_fw_authenticate(priv->dev, se_fw_phyaddr))
> >> + dev_err(priv->dev,
> >> + "Failed to authenticate & load SE firmware %s.\n",
> >> + se_fw_name);
> >> +
> >> +exit:
> >> + dmam_free_coherent(priv->dev,
> >> + fw->size,
> >> + se_fw_buf,
> >> + se_fw_phyaddr);
> >> +
> >> + release_firmware(fw);
> >> +}
> >> +
> >> +static int se_if_probe(struct platform_device *pdev)
> >> +{
> >> + struct imx_se_node_info_list *info_list;
> >> + struct device *dev = &pdev->dev;
> >> + struct imx_se_node_info *info;
> >> + struct se_if_priv *priv;
> >> + u32 idx;
> >> + int ret;
> >> +
> >> + if (of_property_read_u32(dev->of_node, "reg", &idx)) {
> >> + ret = -EINVAL;
> >> + goto exit;
> >> + }
> >> +
> >> + info_list = (struct imx_se_node_info_list *)
> >> + device_get_match_data(dev->parent);
> >> + info = get_imx_se_node_info(info_list, idx);
> >> +
> >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> >> + if (!priv) {
> >> + ret = -ENOMEM;
> >> + goto exit;
> >> + }
> >> +
> >> + dev_set_drvdata(dev, priv);
> >> +
> >> + /* Mailbox client configuration */
> >> + priv->se_mb_cl.dev = dev;
> >> + priv->se_mb_cl.tx_block = false;
> >> + priv->se_mb_cl.knows_txdone = true;
> >> + priv->se_mb_cl.rx_callback = se_if_rx_callback;
> >> +
> >> + ret = se_if_request_channel(dev, &priv->tx_chan,
> >> + &priv->se_mb_cl, info->mbox_tx_name);
> >> + if (ret) {
> >> + if (ret == -EPROBE_DEFER)
> >> + dev_err(dev, "Mailbox tx channel, is not ready.\n");
> >> + else
> >> + dev_err(dev, "Failed to request tx channel\n");
> >> +
> >> + goto exit;
> >> + }
> >> +
> >> + ret = se_if_request_channel(dev, &priv->rx_chan,
> >> + &priv->se_mb_cl, info->mbox_rx_name);
> >> + if (ret) {
> >> + if (ret == -EPROBE_DEFER)
> >> + dev_err(dev, "Mailbox rx channel, is not ready.\n");
> >> + else
> >> + dev_dbg(dev, "Failed to request rx channel\n");
> >> +
> >> + goto exit;
> >> + }
> >> +
> >> + priv->dev = dev;
> >> + priv->info = info;
> >> +
> >> + /* Initialize the mutex. */
> >> + mutex_init(&priv->se_if_lock);
> >> + mutex_init(&priv->se_if_cmd_lock);
> >> +
> >> + priv->cmd_receiver_dev = NULL;
> >> + priv->waiting_rsp_dev = NULL;
> >> + priv->max_dev_ctx = info->max_dev_ctx;
> >> + priv->cmd_tag = info->cmd_tag;
> >> + priv->rsp_tag = info->rsp_tag;
> >> + priv->mem_pool_name = info->pool_name;
> >> + priv->success_tag = info->success_tag;
> >> + priv->base_api_ver = info->base_api_ver;
> >> + priv->fw_api_ver = info->fw_api_ver;
> >> +
> >> + init_completion(&priv->done);
> >> + spin_lock_init(&priv->lock);
> >> +
> >> + if (info->reserved_dma_ranges) {
> >> + ret = of_reserved_mem_device_init(dev);
> >> + if (ret) {
> >> + dev_err(dev,
> >> + "failed to init reserved memory region %d\n",
> >> + ret);
> >> + priv->flags &= (~RESERVED_DMA_POOL);
> >> + goto exit;
> >> + }
> >> + priv->flags |= RESERVED_DMA_POOL;
> >> + }
> >> +
> >> + if (info->fw_name_in_rfs) {
> >> + ret = request_firmware_nowait(THIS_MODULE,
> >> + FW_ACTION_UEVENT,
> >> + info->fw_name_in_rfs,
> >> + dev, GFP_KERNEL, priv,
> >> + se_load_firmware);
> >> + if (ret)
> >> + dev_warn(dev, "Failed to get firmware [%s].\n",
> >> + info->fw_name_in_rfs);
> >> + }
> >> +
> >> + ret = imx_fetch_soc_info(dev);
> >> + if (ret) {
> >> + dev_err(dev,
> >> + "failed[%d] to fetch SoC Info\n", ret);
> >> + goto exit;
> >> + }
> >> +
> >> + if (info->imem_mgmt) {
> >> + /* allocate buffer where SE store encrypted IMEM */
> >> + priv->imem.buf = dmam_alloc_coherent(dev, ELE_IMEM_SIZE,
> >> + &priv->imem.phyaddr,
> >> + GFP_KERNEL);
> >> + if (!priv->imem.buf) {
> >> + dev_err(dev,
> >> + "dmam-alloc-failed: To store encr-IMEM.\n");
> >> + ret = -ENOMEM;
> >> + goto exit;
> >> + }
> >> + }
> >> +
> >> + if (info->max_dev_ctx) {
> >> + ret = init_device_context(dev);
> >> + if (ret) {
> >> + dev_err(dev,
> >> + "Failed[0x%x] to create device contexts.\n",
> >> + ret);
> >> + goto exit;
> >> + }
> >> + }
> >> +
> >> + dev_info(dev, "i.MX secure-enclave: %s interface to firmware,
> configured.\n",
> >> + info->se_name);
> >> + return devm_of_platform_populate(dev);
> >> +
> >> +exit:
> >> + /* if execution control reaches here, if probe fails.
> >> + * hence doing the cleanup
> >> + */
> >> + if (se_probe_if_cleanup(pdev))
> >> + dev_err(dev,
> >> + "Failed to clean-up the child node probe.\n");
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int se_probe(struct platform_device *pdev)
> >> +{
> >> + struct device_node *enum_dev_node;
> >> + struct device *dev = &pdev->dev;
> >> + int enum_count;
> >> + int ret;
> >> +
> >> + enum_count = of_get_child_count(dev->of_node);
> >> + if (!enum_count) {
> >> + ret = -EINVAL;
> >> + dev_err(dev, "Zero Tx/Rx path MU nodes.\n");
> >> + return ret;
> >> + }
> >> +
> >> + for_each_child_of_node(dev->of_node, enum_dev_node) {
> >> + struct platform_device *enum_plat_dev __maybe_unused;
> >> +
> >> + if (!of_device_is_available(enum_dev_node))
> >> + continue;
> >> +
> >> + enum_plat_dev = of_platform_device_create(enum_dev_node,
> >> + NULL,
> >> + dev);
> >> + if (!enum_plat_dev) {
> >> + ret = -EINVAL;
> >> + of_node_put(enum_dev_node);
> >> + dev_err(dev,
> >> + "Failed to create enumerated platform device.");
> >> + break;
> >> + }
> >> +
> >> + ret = se_if_probe(enum_plat_dev);
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static int se_remove(struct platform_device *pdev)
> >> +{
> >> + if (se_probe_cleanup(pdev))
> >> + dev_err(&pdev->dev,
> >> + "i.MX Secure Enclave is not cleanly un-probed.");
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int se_suspend(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + const struct imx_se_node_info *info
> >> + = priv->info;
> >> +
> >> + if (info && info->imem_mgmt)
> >> + priv->imem.size = se_save_imem_state(dev);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int se_resume(struct device *dev)
> >> +{
> >> + struct se_if_priv *priv = dev_get_drvdata(dev);
> >> + const struct imx_se_node_info *info
> >> + = priv->info;
> >> + int i;
> >> +
> >> + for (i = 0; i < priv->max_dev_ctx; i++)
> >> + wake_up_interruptible(&priv->ctxs[i]->wq);
> >> +
> >> + if (info && info->imem_mgmt)
> >> + se_restore_imem_state(dev);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static const struct dev_pm_ops se_pm = {
> >> + RUNTIME_PM_OPS(se_suspend, se_resume, NULL)
> >> +};
> >> +
> >> +static struct platform_driver se_driver = {
> >> + .driver = {
> >> + .name = "fsl-se-fw",
> >> + .of_match_table = se_match,
> >> + .pm = &se_pm,
> >> + },
> >> + .probe = se_probe,
> >> + .remove = se_remove,
> >> +};
> >> +MODULE_DEVICE_TABLE(of, se_match);
> >> +
> >> +module_platform_driver(se_driver);
> >> +
> >> +MODULE_AUTHOR("Pankaj Gupta <pankaj.gupta at nxp.com>");
> >> +MODULE_DESCRIPTION("iMX Secure Enclave Driver.");
> >> +MODULE_LICENSE("GPL");
> >> diff --git a/drivers/firmware/imx/se_ctrl.h
> b/drivers/firmware/imx/se_ctrl.h
> >> new file mode 100644
> >> index 000000000000..76e1ce77c52f
> >> --- /dev/null
> >> +++ b/drivers/firmware/imx/se_ctrl.h
> >> @@ -0,0 +1,151 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#ifndef SE_MU_H
> >> +#define SE_MU_H
> >> +
> >> +#include <linux/miscdevice.h>
> >> +#include <linux/semaphore.h>
> >> +#include <linux/mailbox_client.h>
> >> +
> >> +#define MAX_FW_LOAD_RETRIES 50
> >> +
> >> +#define MSG_TAG(x) (((x) & 0xff000000) >> 24)
> >> +#define MSG_COMMAND(x) (((x) & 0x00ff0000) >> 16)
> >> +#define MSG_SIZE(x) (((x) & 0x0000ff00) >> 8)
> >> +#define MSG_VER(x) ((x) & 0x000000ff)
> >> +#define RES_STATUS(x) ((x) & 0x000000ff)
> >> +#define MAX_DATA_SIZE_PER_USER (65 * 1024)
> >> +#define S4_DEFAULT_MUAP_INDEX (2)
> >> +#define S4_MUAP_DEFAULT_MAX_USERS (4)
> >> +#define MESSAGING_VERSION_6 0x6
> >> +#define MESSAGING_VERSION_7 0x7
> >> +
> >> +#define DEFAULT_MESSAGING_TAG_COMMAND (0x17u)
> >> +#define DEFAULT_MESSAGING_TAG_RESPONSE (0xe1u)
> >> +
> >> +#define SE_MU_IO_FLAGS_USE_SEC_MEM (0x02u)
> >> +#define SE_MU_IO_FLAGS_USE_SHORT_ADDR (0x04u)
> >> +
> >> +struct se_imem_buf {
> >> + u8 *buf;
> >> + phys_addr_t phyaddr;
> >> + u32 size;
> >> +};
> >> +
> >> +struct se_buf_desc {
> >> + u8 *shared_buf_ptr;
> >> + u8 *usr_buf_ptr;
> >> + u32 size;
> >> + struct list_head link;
> >> +};
> >> +
> >> +/* Status of a char device */
> >> +enum se_if_dev_ctx_status_t {
> >> + MU_FREE,
> >> + MU_OPENED
> >> +};
> >> +
> >> +struct se_shared_mem {
> >> + dma_addr_t dma_addr;
> >> + u32 size;
> >> + u32 pos;
> >> + u8 *ptr;
> >> +};
> >> +
> >> +/* Private struct for each char device instance. */
> >> +struct se_if_device_ctx {
> >> + struct device *dev;
> >> + struct se_if_priv *priv;
> >> + struct miscdevice miscdev;
> >> +
> >> + enum se_if_dev_ctx_status_t status;
> >> + wait_queue_head_t wq;
> >> + struct semaphore fops_lock;
> >> +
> >> + u32 pending_hdr;
> >> + struct list_head pending_in;
> >> + struct list_head pending_out;
> >> +
> >> + struct se_shared_mem secure_mem;
> >> + struct se_shared_mem non_secure_mem;
> >> +
> >> + u32 *temp_resp;
> >> + u32 temp_resp_size;
> >> + struct notifier_block se_notify;
> >> +};
> >> +
> >> +/* Header of the messages exchange with the EdgeLock Enclave */
> >> +struct se_msg_hdr {
> >> + u8 ver;
> >> + u8 size;
> >> + u8 command;
> >> + u8 tag;
> >> +} __packed;
> >> +
> >> +#define SE_MU_HDR_SZ 4
> >> +#define TAG_OFFSET (SE_MU_HDR_SZ - 1)
> >> +#define CMD_OFFSET (SE_MU_HDR_SZ - 2)
> >> +#define SZ_OFFSET (SE_MU_HDR_SZ - 3)
> >> +#define VER_OFFSET (SE_MU_HDR_SZ - 4)
> >> +
> >> +struct se_api_msg {
> >> + u32 header; /* u8 Tag; u8 Command; u8 Size; u8 Ver; */
> >> + u32 *data;
> >> +};
> >> +
> >> +struct se_if_priv {
> >> + struct se_if_device_ctx *cmd_receiver_dev;
> >> + struct se_if_device_ctx *waiting_rsp_dev;
> >> + bool no_dev_ctx_used;
> >> + /*
> >> + * prevent parallel access to the se interface registers
> >> + * e.g. a user trying to send a command while the other one is
> >> + * sending a response.
> >> + */
> >> + struct mutex se_if_lock;
> >> + /*
> >> + * prevent a command to be sent on the se interface while another one
> is
> >> + * still processing. (response to a command is allowed)
> >> + */
> >> + struct mutex se_if_cmd_lock;
> >> + struct device *dev;
> >> + u8 *mem_pool_name;
> >> + u8 cmd_tag;
> >> + u8 rsp_tag;
> >> + u8 success_tag;
> >> + u8 base_api_ver;
> >> + u8 fw_api_ver;
> >> + u32 fw_fail;
> >> + const void *info;
> >> +
> >> + struct mbox_client se_mb_cl;
> >> + struct mbox_chan *tx_chan, *rx_chan;
> >> + struct se_api_msg *rx_msg;
> >> + struct completion done;
> >> + spinlock_t lock;
> >> + /*
> >> + * Flag to retain the state of initialization done at
> >> + * the time of se-mu probe.
> >> + */
> >> + uint32_t flags;
> >> + u8 max_dev_ctx;
> >> + struct se_if_device_ctx **ctxs;
> >> + struct se_imem_buf imem;
> >> +};
> >> +
> >> +void *get_phy_buf_mem_pool(struct device *dev,
> >> + u8 *mem_pool_name,
> >> + dma_addr_t *buf,
> >> + u32 size);
> >> +phys_addr_t get_phy_buf_mem_pool1(struct device *dev,
> >> + u8 *mem_pool_name,
> >> + u32 **buf,
> >> + u32 size);
> >> +void free_phybuf_mem_pool(struct device *dev,
> >> + u8 *mem_pool_name,
> >> + u32 *buf,
> >> + u32 size);
> >> +#endif
> >> diff --git a/include/linux/firmware/imx/se_api.h
> b/include/linux/firmware/imx/se_api.h
> >> new file mode 100644
> >> index 000000000000..c47f84906837
> >> --- /dev/null
> >> +++ b/include/linux/firmware/imx/se_api.h
> >> @@ -0,0 +1,14 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#ifndef __SE_API_H__
> >> +#define __SE_API_H__
> >> +
> >> +#include <linux/types.h>
> >> +
> >> +#define SOC_ID_OF_IMX8ULP 0x084D
> >> +#define SOC_ID_OF_IMX93 0x9300
> >> +
> >> +#endif /* __SE_API_H__ */
> >> diff --git a/include/uapi/linux/se_ioctl.h b/include/uapi/linux/se_ioctl.h
> >> new file mode 100644
> >> index 000000000000..f68a36e9da2c
> >> --- /dev/null
> >> +++ b/include/uapi/linux/se_ioctl.h
> >> @@ -0,0 +1,88 @@
> >> +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR BSD-3-
> Clause*/
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#ifndef SE_IOCTL_H
> >> +#define SE_IOCTL_H
> >> +
> >> +/* IOCTL definitions. */
> >> +
> >> +struct se_ioctl_setup_iobuf {
> >> + u8 *user_buf;
> >> + u32 length;
> >> + u32 flags;
> >> + u64 ele_addr;
> >> +};
> >> +
> >> +struct se_ioctl_shared_mem_cfg {
> >> + u32 base_offset;
> >> + u32 size;
> >> +};
> >> +
> >> +struct se_ioctl_get_if_info {
> >> + u8 se_if_id;
> >> + u8 interrupt_idx;
> >> + u8 tz;
> >> + u8 did;
> >> + u8 cmd_tag;
> >> + u8 rsp_tag;
> >> + u8 success_tag;
> >> + u8 base_api_ver;
> >> + u8 fw_api_ver;
> >> +};
> >> +
> >> +struct se_ioctl_signed_message {
> >> + u8 *message;
> >> + u32 msg_size;
> >> + u32 error_code;
> >> +};
> >> +
> >> +struct se_ioctl_get_soc_info {
> >> + u16 soc_id;
> >> + u16 soc_rev;
> >> +};
> >> +
> >> +/* IO Buffer Flags */
> >> +#define SE_IO_BUF_FLAGS_IS_OUTPUT (0x00u)
> >> +#define SE_IO_BUF_FLAGS_IS_INPUT (0x01u)
> >> +#define SE_IO_BUF_FLAGS_USE_SEC_MEM (0x02u)
> >> +#define SE_IO_BUF_FLAGS_USE_SHORT_ADDR (0x04u)
> >> +#define SE_IO_BUF_FLAGS_IS_IN_OUT (0x10u)
> >> +
> >> +/* IOCTLS */
> >> +#define SE_IOCTL 0x0A /* like MISC_MAJOR. */
> >> +
> >> +/*
> >> + * ioctl to designated the current fd as logical-reciever.
> >> + * This is ioctl is send when the nvm-daemon, a slave to the
> >> + * firmware is started by the user.
> >> + */
> >> +#define SE_IOCTL_ENABLE_CMD_RCV _IO(SE_IOCTL, 0x01)
> >> +
> >> +/*
> >> + * ioctl to get the buffer allocated from the memory, which is shared
> >> + * between kernel and FW.
> >> + * Post allocation, the kernel tagged the allocated memory with:
> >> + * Output
> >> + * Input
> >> + * Input-Output
> >> + * Short address
> >> + * Secure-memory
> >> + */
> >> +#define SE_IOCTL_SETUP_IOBUF _IOWR(SE_IOCTL, 0x03, \
> >> + struct se_ioctl_setup_iobuf)
> >> +
> >> +/*
> >> + * ioctl to get the mu information, that is used to exchange message
> >> + * with FW, from user-spaced.
> >> + */
> >> +#define SE_IOCTL_GET_MU_INFO _IOR(SE_IOCTL, 0x04, \
> >> + struct se_ioctl_get_if_info)
> >> +/*
> >> + * ioctl to get SoC Info from user-space.
> >> + */
> >> +#define SE_IOCTL_GET_SOC_INFO _IOR(SE_IOCTL, 0x06, \
> >> + struct se_ioctl_get_soc_info)
> >> +
> >> +#endif
> >>
> >> --
> >> 2.34.1
> >>
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefe
> nse.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttp-
> 3A__lists.infradead.org_mailman_listinfo_linux-2Darm-
> 2Dkernel%26d%3DDwICAg%26c%3DnKjWec2b6R0mOyPaz7xtfQ%26r%3DV_
> GK7jRuCHDErm6txmgDK1-MbUihtnSQ3gPgB-A-
> JKU%26m%3DeKFfdy51aVVEAe4I9Lk2CN77y_4Hxf2pI_9fv5pVWLo9DwQNgC
> pca6smAwvwFycf%26s%3D187NgAc1LvHOnaB90o76OtTVe5J2eG-
> Y6Xgp05PQpBY%26e%3D&data=05%7C02%7Cpankaj.gupta%40nxp.com%7C1
> 11dd89e61f149b5f7e708dc71290348%7C686ea1d3bc2b4c6fa92cd99c5c3016
> 35%7C0%7C0%7C638509668202255142%7CUnknown%7CTWFpbGZsb3d8eyJ
> WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%
> 7C0%7C%7C%7C&sdata=sgoXx408lERnChy2nfitsuD8MiGHh%2FN2gTk9cdzqd
> 9w%3D&reserved=0
More information about the linux-arm-kernel
mailing list