[PATCH v2 1/4] arm64: dts: amlogic: a1: add new syspll_in input for clkc_pll controller

[Dmitry Rokosov]

Input clock 'syspll_in' is needed for the 'sys_pll' clock and is
inherited from the Peripherals Clock Controller.

Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 93b85b26199c..feed2bd7ae48 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -889,8 +889,10 @@ clkc_pll: pll-clock-controller at 7c80 {
 				reg = <0 0x7c80 0 0x18c>;
 				#clock-cells = <1>;
 				clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
-					 <&clkc_periphs CLKID_HIFIPLL_IN>;
-				clock-names = "fixpll_in", "hifipll_in";
+					 <&clkc_periphs CLKID_HIFIPLL_IN>,
+					 <&clkc_periphs CLKID_SYSPLL_IN>;
+				clock-names = "fixpll_in", "hifipll_in",
+					      "syspll_in";
 			};
 
 			sd_emmc: sd at 10000 {
-- 
2.43.0