[PATCH 2/3] dt-bindings: mfd: add schema for 8ulp AVD-SIM

[Laurentiu Mihalcea]

On 4/22/2024 5:29 PM, Rob Herring wrote:
> On Thu, Apr 18, 2024 at 11:37:19PM +0300, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
>>
>> Add schema for i.MX8ULP's AVD-SIM module.
>>
>> Signed-off-by: Liu Ying <victor.liu at nxp.com>
>> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea at nxp.com>
>> ---
>>  .../bindings/mfd/fsl,imx8ulp-avd-sim.yaml     | 42 +++++++++++++++++++
>>  1 file changed, 42 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8ulp-avd-sim.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8ulp-avd-sim.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8ulp-avd-sim.yaml
>> new file mode 100644
>> index 000000000000..4020c6e37f80
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8ulp-avd-sim.yaml
>> @@ -0,0 +1,42 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mfd/fsl,imx8ulp-avd-sim.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: NXP i.MX8ULP Audio-Video Domain System Integration Module
>> +
>> +maintainers:
>> +  - Liu Ying <victor.liu at nxp.com>
>> +
>> +description: |
>> +  The AVD-SIM module provides configuration options for components of AVD.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: fsl,imx8ulp-avd-sim
>> +      - const: syscon
>> +      - const: simple-mfd
> 'simple-mfd' means you have child nodes, but you have none defined.

Thanks for the clarification! These were intentionally omitted since they're
not needed for the DSP.

>
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
> If you do add child nodes, 'simple-mfd' also means there is not any 
> dependency on the parent node such as needing this clock to be enabled 
> for the child nodes.
>
> Rob

The plan was to add the children later on as required.
Given the children would in fact depend on the parent's clock being
enabled, I wonder if just removing 'simple-mfd' from the compatible
list would do the trick?