[PATCH v2 1/2] arm64: dts: ti: am642-phyboard-electra: Remove PCIe pinmuxing

[Nathan Morrisson]

Remove pinmuxing for PCIe so that we can add it in an overlay.

Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>
---
v2: No change

 .../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts    | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 8237b8c815b8..58cee0a8412c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -190,18 +190,6 @@ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)	/* (E19) USB0_DRVVBUS */
 		>;
 	};
 
-	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
-		>;
-	};
-
-	pcie0_pins_default: pcie0-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
-		>;
-	};
-
 	user_leds_pins_default: user-leds-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x003c, PIN_OUTPUT, 7)	/* (T20) GPMC0_AD0.GPIO0_15 */
-- 
2.25.1