[PATCH 14/18] clk: imx: imx8qxp: Add LVDS bypass clocks
Peng Fan (OSS)
peng.fan at oss.nxp.com
Fri May 3 17:49:07 PDT 2024
From: Peng Fan <peng.fan at nxp.com>
For iMX8QXP and iMX8QM, add bypass clocks and register some of the LVDS
clocks with imx_clk_scu2 as the parent needs to explicitly set.
In order to make sure MIPI DSI works well after suspend/resume, the LVDS
pixel and phy clocks must be initialized before the MIPI tx_esacpe
and rx_escape clocks. LVDS phy, LVDS pixel, tx_escape, and rx_esacpe are all
on the same MSLICE. They all share the same clock parent. So, setting the
parent source or rate affects all of these clocks. In the LVDS use case the
MIPI tx_escape and rx_escape are not saved and restored. So, LVDS works for
either clock initialization order. For MIPI case, LVDS must be initialized first.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan at nxp.com>
Signed-off-by: Oliver F. Brown <oliver.brown at oss.nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
drivers/clk/imx/clk-imx8qxp.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
index 7d8883916cac..a0654edaae83 100644
--- a/drivers/clk/imx/clk-imx8qxp.c
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -71,7 +71,7 @@ static const char *const lvds0_sels[] = {
"clk_dummy",
"clk_dummy",
"clk_dummy",
- "mipi0_lvds_bypass_clk",
+ "lvds0_bypass_clk",
};
static const char *const lvds1_sels[] = {
@@ -79,7 +79,7 @@ static const char *const lvds1_sels[] = {
"clk_dummy",
"clk_dummy",
"clk_dummy",
- "mipi1_lvds_bypass_clk",
+ "lvds1_bypass_clk",
};
static const char * const mipi_sels[] = {
@@ -223,9 +223,9 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
/* MIPI-LVDS SS */
imx_clk_scu("mipi0_bypass_clk", IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_BYPASS);
imx_clk_scu("mipi0_pixel_clk", IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_PER);
- imx_clk_scu("mipi0_lvds_bypass_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_BYPASS);
- imx_clk_scu2("mipi0_lvds_pixel_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC2);
- imx_clk_scu2("mipi0_lvds_phy_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC3);
+ imx_clk_scu("lvds0_bypass_clk", IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_BYPASS);
+ imx_clk_scu2("lvds0_pixel_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC2);
+ imx_clk_scu2("lvds0_phy_clk", lvds0_sels, ARRAY_SIZE(lvds0_sels), IMX_SC_R_LVDS_0, IMX_SC_PM_CLK_MISC3);
imx_clk_scu2("mipi0_dsi_tx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_MST_BUS);
imx_clk_scu2("mipi0_dsi_rx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_SLV_BUS);
imx_clk_scu2("mipi0_dsi_phy_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_0, IMX_SC_PM_CLK_PHY);
@@ -235,10 +235,9 @@ static int imx8qxp_clk_probe(struct platform_device *pdev)
imx_clk_scu("mipi1_bypass_clk", IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_BYPASS);
imx_clk_scu("mipi1_pixel_clk", IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_PER);
- imx_clk_scu("mipi1_lvds_bypass_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_BYPASS);
- imx_clk_scu2("mipi1_lvds_pixel_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC2);
- imx_clk_scu2("mipi1_lvds_phy_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC3);
-
+ imx_clk_scu("lvds1_bypass_clk", IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_BYPASS);
+ imx_clk_scu2("lvds1_pixel_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC2);
+ imx_clk_scu2("lvds1_phy_clk", lvds1_sels, ARRAY_SIZE(lvds1_sels), IMX_SC_R_LVDS_1, IMX_SC_PM_CLK_MISC3);
imx_clk_scu2("mipi1_dsi_tx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_MST_BUS);
imx_clk_scu2("mipi1_dsi_rx_esc_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_SLV_BUS);
imx_clk_scu2("mipi1_dsi_phy_clk", mipi_sels, ARRAY_SIZE(mipi_sels), IMX_SC_R_MIPI_1, IMX_SC_PM_CLK_PHY);
--
2.37.1
More information about the linux-arm-kernel
mailing list