[PATCH v4 3/3] arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

[Peng Fan]

> Subject: Re: [PATCH v4 3/3] arm64: dts: freescale: add i.MX95 19x19 EVK
> minimal board dts
> 
> Hi Peng,
> 
> On Thu, May 2, 2024 at 10:29 PM Peng Fan (OSS) <peng.fan at oss.nxp.com>
> wrote:
> 
> > +       aliases {
> > +               gpio0 = &gpio1;
> > +               gpio1 = &gpio2;
> > +               gpio2 = &gpio3;
> > +               gpio3 = &gpio4;
> > +               gpio4 = &gpio5;
> > +               i2c0 = &lpi2c1;
> > +               i2c1 = &lpi2c2;
> > +               i2c2 = &lpi2c3;
> > +               i2c3 = &lpi2c4;
> > +               i2c4 = &lpi2c5;
> > +               i2c5 = &lpi2c6;
> > +               i2c6 = &lpi2c7;
> > +               i2c7 = &lpi2c8;
> > +               mmc0 = &usdhc1;
> > +               mmc1 = &usdhc2;
> > +               mmc2 = &usdhc3;
> > +               serial0 = &lpuart1;
> > +               serial1 = &lpuart2;
> > +               serial2 = &lpuart3;
> > +               serial3 = &lpuart4;
> > +               serial4 = &lpuart5;
> > +               serial5 = &lpuart6;
> > +               serial6 = &lpuart7;
> > +               serial7 = &lpuart8;
> > +       };
> 
> This looks like an excessive aliases list.
> Can't you just have serial0, mmc0, and mmc1 instead?

ok, will drop other alias.

> 
> > +       reg_1p8v: regulator-1p8v {
> > +               compatible = "regulator-fixed";
> > +               regulator-max-microvolt = <1800000>;
> > +               regulator-min-microvolt = <1800000>;
> > +               regulator-name = "+V1.8_SW";
> > +       };
> > +
> > +       reg_3p3v: regulator-3p3v {
> > +               compatible = "regulator-fixed";
> > +               regulator-max-microvolt = <3300000>;
> > +               regulator-min-microvolt = <3300000>;
> > +               regulator-name = "+V3.3_SW";
> > +       };
> > +
> > +       reg_vref_1v8: regulator-adc-vref {
> > +               compatible = "regulator-fixed";
> > +               regulator-name = "vref_1v8";
> > +               regulator-min-microvolt = <1800000>;
> > +               regulator-max-microvolt = <1800000>;
> > +       };
> 
> These regulators are not used anywhere.
> 
> Please add them when they have consumers for them.

ok. Will drop the unused ones for now.

Thanks,
Peng.