[PATCH 1/2] drm/rockchip: vop2: fix rk3588 dp+dsi maxclk verification

[Quentin Schulz]

Hi Heiko,

On 4/25/24 9:55 PM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
> 
> The clock is in Hz while the value checked against is in kHz, so
> actual frequencies will never be able to be below to max value.
> Fix this by specifying the max-value in Hz too.
> 
> Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> ---
>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> index 9bee1fd88e6a2..523880a4e8e74 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> @@ -1719,7 +1719,7 @@ static unsigned long rk3588_calc_cru_cfg(struct vop2_video_port *vp, int id,
>   		else
>   			dclk_out_rate = v_pixclk >> 2;
>   
> -		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000);
> +		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000000);
>   		if (!dclk_rate) {
>   			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",

It seems the error message is incorrect as well and should be saying Hz 
instead of KHz. (note also the lowercase z).

>   				dclk_out_rate);
> @@ -1736,7 +1736,7 @@ static unsigned long rk3588_calc_cru_cfg(struct vop2_video_port *vp, int id,
>   		 * dclk_rate = N * dclk_core_rate N = (1,2,4 ),
>   		 * we get a little factor here
>   		 */
> -		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000);
> +		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000000);
>   		if (!dclk_rate) {
>   			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",

Ditto.

Otherwise,

Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>

Thanks!
Quentin