[PATCH v4 0/5] Add RK816 PMIC support

[Alex Bee]

Am 03.05.24 um 10:18 schrieb Lee Jones:
> On Fri, 03 May 2024, Lee Jones wrote:
>
>> On Tue, 16 Apr 2024 18:12:32 +0200, Alex Bee wrote:
>>> This series aims to add support for Rockchip RK816 PMIC series. As per
>>> datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
>>> PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
>>> of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
>>> key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
>>> integrated fuel gauge. Charger and fuel gauge are not part of this series.
>>> Two of the switches (otg/boost) are part of the binding, but not of
>>> the driver. They must only ever be enabled if no battery charging is
>>> happening, but it will be enabled automatically if a battery is attached
>>> and an external power source is connected. Thus that needs some
>>> incorporation of a yet to be added charger driver.
>>> Integration in the existing rk8xx-infrastructure was pretty straightforward
>>> and only needed very little tweaking. In order to not further bloat the
>>> driver(s) too much with additional `#define`s I tried to re-use existing
>>> ones wherever possible.
>>>
>>> [...]
>> Applied, thanks!
>>
>> [1/5] dt-bindings: mfd: Add rk816 binding
>>        commit: 06dfb41b1cf8d64327e5c4391e165f466506c4f0
>> [2/5] mfd: rk8xx: Add RK816 support
>>        commit: e9006f81faf8e438ea83626db578610e49f31576
>> [3/5] pinctrl: rk805: Add rk816 pinctrl support
>>        commit: 1bd97d64b5f0c01d03ecc9473ccfcf180dbbf54a
>> [4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
>>        commit: 9f4e899c286b5127e2443d50e37ee2112efbfa2c
>> [5/5] regulator: rk808: Add RK816 support
>>        commit: 5eb068da74a0b443fb99a89d9e5062691649c470
> Submitted for build testing.
>
> If successful, I'll follow-up with a PR.

Great, thanks a lot.

Alex