[PATCH 1/4] arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label

[Nathan Morrisson]

Label the spi nor as serial_flash. This allows us to disable the
flash with an overlay common to all am6xx-phycore-som boards.

Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>
---
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 125e507966fb..ca0bbf21f7fe 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -296,7 +296,7 @@ &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash at 0 {
+	serial_flash: flash at 0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
-- 
2.25.1