[PATCH bpf-next v6 0/4] bpf: Inline helpers in arm64 and riscv JITs
Puranjay Mohan
puranjay at kernel.org
Thu May 2 08:18:50 PDT 2024
Changes in v5 -> v6:
arm64 v5: https://lore.kernel.org/all/20240430234739.79185-1-puranjay@kernel.org/
riscv v2: https://lore.kernel.org/all/20240430175834.33152-1-puranjay@kernel.org/
- Combine riscv and arm64 changes in single series
- Some coding style fixes
Changes in v4 -> v5:
v4: https://lore.kernel.org/all/20240429131647.50165-1-puranjay@kernel.org/
- Implement the inlining of the bpf_get_smp_processor_id() in the JIT.
NOTE: This needs to be based on:
https://lore.kernel.org/all/20240430175834.33152-1-puranjay@kernel.org/
to be built.
Manual run of bpf-ci with this series rebased on above:
https://github.com/kernel-patches/bpf/pull/6929
Changes in v3 -> v4:
v3: https://lore.kernel.org/all/20240426121349.97651-1-puranjay@kernel.org/
- Fix coding style issue related to C89 standards.
Changes in v2 -> v3:
v2: https://lore.kernel.org/all/20240424173550.16359-1-puranjay@kernel.org/
- Fixed the xlated dump of percpu mov to "r0 = &(void __percpu *)(r0)"
- Made ARM64 and x86-64 use the same code for inlining. The only difference
that remains is the per-cpu address of the cpu_number.
Changes in v1 -> v2:
v1: https://lore.kernel.org/all/20240405091707.66675-1-puranjay12@gmail.com/
- Add a patch to inline bpf_get_smp_processor_id()
- Fix an issue in MRS instruction encoding as pointed out by Will
- Remove CONFIG_SMP check because arm64 kernel always compiles with CONFIG_SMP
This series adds the support of internal only per-CPU instructions and inlines
the bpf_get_smp_processor_id() helper call for ARM64 and RISC-V BPF JITs.
Here is an example of calls to bpf_get_smp_processor_id() and
percpu_array_map_lookup_elem() before and after this series on ARM64.
BPF
=====
BEFORE AFTER
-------- -------
int cpu = bpf_get_smp_processor_id(); int cpu = bpf_get_smp_processor_id();
(85) call bpf_get_smp_processor_id#229032 (85) call bpf_get_smp_processor_id#8
p = bpf_map_lookup_elem(map, &zero); p = bpf_map_lookup_elem(map, &zero);
(18) r1 = map[id:78] (18) r1 = map[id:153]
(18) r2 = map[id:82][0]+65536 (18) r2 = map[id:157][0]+65536
(85) call percpu_array_map_lookup_elem#313512 (07) r1 += 496
(61) r0 = *(u32 *)(r2 +0)
(35) if r0 >= 0x1 goto pc+5
(67) r0 <<= 3
(0f) r0 += r1
(79) r0 = *(u64 *)(r0 +0)
(bf) r0 = &(void __percpu *)(r0)
(05) goto pc+1
(b7) r0 = 0
ARM64 JIT
===========
BEFORE AFTER
-------- -------
int cpu = bpf_get_smp_processor_id(); int cpu = bpf_get_smp_processor_id();
mov x10, #0xfffffffffffff4d0 mrs x10, sp_el0
movk x10, #0x802b, lsl #16 ldr w7, [x10, #24]
movk x10, #0x8000, lsl #32
blr x10
add x7, x0, #0x0
p = bpf_map_lookup_elem(map, &zero); p = bpf_map_lookup_elem(map, &zero);
mov x0, #0xffff0003ffffffff mov x0, #0xffff0003ffffffff
movk x0, #0xce5c, lsl #16 movk x0, #0xe0f3, lsl #16
movk x0, #0xca00 movk x0, #0x7c00
mov x1, #0xffff8000ffffffff mov x1, #0xffff8000ffffffff
movk x1, #0x8bdb, lsl #16 movk x1, #0xb0c7, lsl #16
movk x1, #0x6000 movk x1, #0xe000
mov x10, #0xffffffffffff3ed0 add x0, x0, #0x1f0
movk x10, #0x802d, lsl #16 ldr w7, [x1]
movk x10, #0x8000, lsl #32 cmp x7, #0x1
blr x10 b.cs 0x0000000000000090
add x7, x0, #0x0 lsl x7, x7, #3
add x7, x7, x0
ldr x7, [x7]
mrs x10, tpidr_el1
add x7, x7, x10
b 0x0000000000000094
mov x7, #0x0
Performance improvement found using benchmark[1]
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+-------------------+-------------------+--------------+
| Name | Before | After | % change |
|---------------+-------------------+-------------------+--------------|
| glob-arr-inc | 23.380 ± 1.675M/s | 25.893 ± 0.026M/s | + 10.74% |
| arr-inc | 23.928 ± 0.034M/s | 25.213 ± 0.063M/s | + 5.37% |
| hash-inc | 12.352 ± 0.005M/s | 12.609 ± 0.013M/s | + 2.08% |
+---------------+-------------------+-------------------+--------------+
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
RISCV64 JIT output for `call bpf_get_smp_processor_id`
=======================================================
Before After
-------- -------
auipc t1,0x848c ld a5,32(tp)
jalr 604(t1)
mv a5,a0
Benchmark using [1] on Qemu.
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+------------------+------------------+--------------+
| Name | Before | After | % change |
|---------------+------------------+------------------+--------------|
| glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% |
| arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% |
| hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% |
+---------------+------------------+------------------+--------------+
Puranjay Mohan (4):
riscv, bpf: add internal-only MOV instruction to resolve per-CPU addrs
riscv, bpf: inline bpf_get_smp_processor_id()
arm64, bpf: add internal-only MOV instruction to resolve per-CPU addrs
bpf, arm64: inline bpf_get_smp_processor_id() helper
arch/arm64/include/asm/insn.h | 8 ++++++
arch/arm64/lib/insn.c | 11 ++++++++
arch/arm64/net/bpf_jit.h | 8 ++++++
arch/arm64/net/bpf_jit_comp.c | 39 +++++++++++++++++++++++++
arch/riscv/net/bpf_jit_comp64.c | 50 +++++++++++++++++++++++++++++++++
include/linux/filter.h | 1 +
kernel/bpf/core.c | 11 ++++++++
kernel/bpf/verifier.c | 4 +++
8 files changed, 132 insertions(+)
--
2.40.1
More information about the linux-arm-kernel
mailing list