[PATCH v3 1/3] dt-bindings: display: mediatek: Add OF graph support for board path
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu May 2 04:56:20 PDT 2024
The display IPs in MediaTek SoCs support being interconnected with
different instances of DDP IPs (for example, merge0 or merge1) and/or
with different DDP IPs (for example, rdma can be connected with either
color, dpi, dsi, merge, etc), forming a full Display Data Path that
ends with an actual display.
The final display pipeline is effectively board specific, as it does
depend on the display that is attached to it, and eventually on the
sensors supported by the board (for example, Adaptive Ambient Light
would need an Ambient Light Sensor, otherwise it's pointless!), other
than the output type.
Add support for OF graphs to most of the MediaTek DDP (display) bindings
to add flexibility to build custom hardware paths, hence enabling board
specific configuration of the display pipeline and allowing to finally
migrate away from using hardcoded paths.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
.../display/mediatek/mediatek,aal.yaml | 40 +++++++++++++++++++
.../display/mediatek/mediatek,ccorr.yaml | 21 ++++++++++
.../display/mediatek/mediatek,color.yaml | 22 ++++++++++
.../display/mediatek/mediatek,dither.yaml | 22 ++++++++++
.../display/mediatek/mediatek,dpi.yaml | 25 +++++++++++-
.../display/mediatek/mediatek,dsc.yaml | 24 +++++++++++
.../display/mediatek/mediatek,dsi.yaml | 27 ++++++++++++-
.../display/mediatek/mediatek,ethdr.yaml | 22 ++++++++++
.../display/mediatek/mediatek,gamma.yaml | 19 +++++++++
.../display/mediatek/mediatek,merge.yaml | 23 +++++++++++
.../display/mediatek/mediatek,od.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ovl-2l.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ovl.yaml | 22 ++++++++++
.../display/mediatek/mediatek,postmask.yaml | 21 ++++++++++
.../display/mediatek/mediatek,rdma.yaml | 22 ++++++++++
.../display/mediatek/mediatek,ufoe.yaml | 21 ++++++++++
16 files changed, 372 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index b4c28e96dd55..623cf7e37fe3 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -61,6 +61,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: AAL input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ AAL output to the next component's input, for example could be one
+ of many gamma, overdrive or other blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
@@ -88,5 +109,24 @@ examples:
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ aal0_in: endpoint {
+ remote-endpoint = <&ccorr0_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ aal0_out: endpoint {
+ remote-endpoint = <&gamma0_in>;
+ };
+ };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
index 8c2a737237f2..71ea277a5d8e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -54,6 +54,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CCORR input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ CCORR output to the input of the next desired component in the
+ display pipeline, usually only one of the available AAL blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index b886ca0d89ea..61d040a10c08 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -64,6 +64,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: COLOR input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ COLOR output to the input of the next desired component in the
+ display pipeline, for example one of the available CCORR or AAL
+ blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
index 1588b3f7cec7..3d4ab3f86294 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -55,6 +55,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DITHER input, usually from a POSTMASK or GAMMA block.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DITHER output to the input of the next desired component in the
+ display pipeline, for example one of the available DSC compressors,
+ DP_INTF, DSI, LVDS or others.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 803c00f26206..6607cb1c6e0a 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -64,13 +64,34 @@ properties:
Output port node. This port should be connected to the input port of an
attached HDMI, LVDS or DisplayPort encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI output to an HDMI, LVDS or DisplayPort encoder input
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
additionalProperties: false
@@ -79,7 +100,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
- dpi0: dpi at 1401d000 {
+ dpi: dpi at 1401d000 {
compatible = "mediatek,mt8173-dpi";
reg = <0x1401d000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
index 2cbdd9ee449d..846de6c17d93 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -49,6 +49,30 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression input, usually from one of the DITHER
+ or MERGE blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Display Stream Compression output to the input of the next desired
+ component in the display pipeline, for example to MERGE, DP_INTF,
+ DPI or DSI.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
index 8611319bed2e..2e9d3d23cbc1 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -76,6 +76,26 @@ properties:
Output port node. This port should be connected to the input
port of an attached DSI panel or DSI-to-eDP encoder chip.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input ports can have multiple endpoints, each of those connects
+ to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI input port, usually from DITHER, DSC or MERGE
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI output to an attached DSI panel, or a DSI-to-X encoder chip
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
@@ -85,7 +105,12 @@ required:
- clock-names
- phys
- phy-names
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 677882348ede..98db47894eeb 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -110,6 +110,28 @@ properties:
include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
function block.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: ETHDR input, usually from one of the MERGE blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ ETHDR output to the input of the next desired component in the
+ display pipeline, for example one of the available MERGE blocks,
+ or others.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index b8b8e83ebc3f..17f299abda11 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -64,6 +64,25 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: GAMMA input, usually from one of the AAL blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ GAMMA output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER or
+ POSTMASK blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index dae839279950..0de9f64f3f84 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -77,6 +77,29 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA,
+ ETHDR or even from a different MERGE block
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or
+ a different MERGE block, or others.
+
+ required:
+ - port at 0
+ - port at 1
+
resets:
description: reset controller
See Documentation/devicetree/bindings/reset/reset.txt for details.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 831c653caffd..71534febd49c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -38,6 +38,28 @@ properties:
items:
- description: OD Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OD input port, usually from an AAL block
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OD output to the input of the next desired component in the
+ display pipeline, for example one of the available RDMA or
+ other blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
index c7dd0ef02dcf..bacdfe7d08a6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -57,6 +57,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS, VDOSYS or other OVLs
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index c471a181d125..e93f0247bdcc 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -74,6 +74,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OVL input port from MMSYS or one of multiple VDOSYS
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ OVL output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, RDMA
+ or WDMA blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
index 11fe32e50a59..fb6fe4742624 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -52,6 +52,27 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: POSTMASK input port, usually from GAMMA
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ POSTMASK output to the input of the next desired component in the
+ display pipeline, for example one of the available DITHER blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index 39dbb5c8bcf8..edb8d3b67025 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -86,6 +86,28 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: RDMA input port, usually from MMSYS, OD or OVL
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ RDMA output to the input of the next desired component in the
+ display pipeline, for example one of the available COLOR, DPI,
+ DSI, MERGE or UFOE blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 39e3e2d4a0db..61a5e22effbf 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -43,6 +43,27 @@ properties:
items:
- description: UFOe Clock
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Input and output ports can have multiple endpoints, each of those
+ connects to either the primary, secondary, etc, display pipeline.
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: UFOE input, usually from one of the RDMA blocks.
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ UFOE output to the input of the next desired component in the
+ display pipeline, usually one of the available DSI blocks.
+
+ required:
+ - port at 0
+ - port at 1
+
required:
- compatible
- reg
--
2.45.0
More information about the linux-arm-kernel
mailing list