[RFC PATCH v2 3/5] dt-bindings: clock: meson: document A1 SoC audio clock controller driver
Jan Dakinevich
jan.dakinevich at salutedevices.com
Sat Mar 30 12:42:00 PDT 2024
On 3/29/24 15:24, Jerome Brunet wrote:
>
> On Thu 28 Mar 2024 at 04:08, Jan Dakinevich <jan.dakinevich at salutedevices.com> wrote:
>
>> Add device tree bindings for A1 SoC audio clock and reset controllers.
>>
>> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> ---
>> .../bindings/clock/amlogic,a1-audio-clkc.yaml | 141 ++++++++++++++++++
>> .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 +++++++++++++++
>> .../reset/amlogic,meson-a1-audio-reset.h | 29 ++++
>> 3 files changed, 292 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>> create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>> create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>> new file mode 100644
>> index 000000000000..1c9ef3292f3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>> @@ -0,0 +1,141 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/amlogic,a1-audio-clkc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic A1 Audio Clock Control Unit and Reset Controller
>> +
>> +maintainers:
>> + - Neil Armstrong <neil.armstrong at linaro.org>
>> + - Jerome Brunet <jbrunet at baylibre.com>
>> + - Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - amlogic,a1-audio-clkc
>> + - amlogic,a1-audio2-clkc
>> +
>> + '#clock-cells':
>> + const: 1
>> +
>> + '#reset-cells':
>> + const: 1
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + minItems: 6
>> + maxItems: 7
>> +
>> + clock-names:
>> + minItems: 6
>> + maxItems: 7
>> +
>> +required:
>> + - compatible
>> + - '#clock-cells'
>> + - reg
>> + - clocks
>> + - clock-names
>> +
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - amlogic,a1-audio-clkc
>> + then:
>> + properties:
>> + clocks:
>> + items:
>> + - description: input core clock
>> + - description: input main peripheral bus clock
>> + - description: input dds_in
>> + - description: input fixed pll div2
>> + - description: input fixed pll div3
>> + - description: input hifi_pll
>> + - description: input oscillator (usually at 24MHz)
>> + clocks-names:
>> + items:
>> + - const: core
>> + - const: pclk
>> + - const: dds_in
>> + - const: fclk_div2
>> + - const: fclk_div3
>> + - const: hifi_pll
>> + - const: xtal
>> + required:
>> + - '#reset-cells'
>> + else:
>> + properties:
>> + clocks:
>> + items:
>> + - description: input main peripheral bus clock
>> + - description: input dds_in
>> + - description: input fixed pll div2
>> + - description: input fixed pll div3
>> + - description: input hifi_pll
>> + - description: input oscillator (usually at 24MHz)
>> + clock-names:
>> + items:
>> + - const: pclk
>> + - const: dds_in
>> + - const: fclk_div2
>> + - const: fclk_div3
>> + - const: hifi_pll
>> + - const: xtal
>
> All the optional slave clock inputs are missing from this dcoumentation..
> They need to be documentated as well
>
Hmmm... here should be a list of 26 entries. First 6 of them are
mandatory, other are optional.
I have no ideas left on how to describe it in yaml, also I can't find
something similar beside existing schemas... Maybe you can give some advice.
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
>> + #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
>> + #include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
>> + audio {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + clkc_audio: audio-clock-controller at fe050000 {
>> + compatible = "amlogic,a1-audio-clkc";
>> + reg = <0x0 0xfe050000 0x0 0xb0>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + clocks = <&clkc_audio2 AUD2_CLKID_AUDIOTOP>,
>> + <&clkc_periphs CLKID_AUDIO>,
>> + <&clkc_periphs CLKID_DDS_IN>,
>> + <&clkc_pll CLKID_FCLK_DIV2>,
>> + <&clkc_pll CLKID_FCLK_DIV3>,
>> + <&clkc_pll CLKID_HIFI_PLL>,
>> + <&xtal>;
>> + clock-names = "core",
>> + "pclk",
>> + "dds_in",
>> + "fclk_div2",
>> + "fclk_div3",
>> + "hifi_pll",
>> + "xtal";
>> + };
>> +
>> + clkc_audio2: audio-clock-controller at fe054800 {
>> + compatible = "amlogic,a1-audio2-clkc";
>> + reg = <0x0 0xfe054800 0x0 0x20>;
>> + #clock-cells = <1>;
>> + clocks = <&clkc_periphs CLKID_AUDIO>,
>> + <&clkc_periphs CLKID_DDS_IN>,
>> + <&clkc_pll CLKID_FCLK_DIV2>,
>> + <&clkc_pll CLKID_FCLK_DIV3>,
>> + <&clkc_pll CLKID_HIFI_PLL>,
>> + <&xtal>;
>> + clock-names = "pclk",
>> + "dds_in",
>> + "fclk_div2",
>> + "fclk_div3",
>> + "hifi_pll",
>> + "xtal";
>> + };
>> + };
>> diff --git a/include/dt-bindings/clock/amlogic,a1-audio-clkc.h b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>> new file mode 100644
>> index 000000000000..b30df3b1ae08
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>> @@ -0,0 +1,122 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#ifndef __A1_AUDIO_CLKC_BINDINGS_H
>> +#define __A1_AUDIO_CLKC_BINDINGS_H
>> +
>> +#define AUD_CLKID_DDR_ARB 1
>> +#define AUD_CLKID_TDMIN_A 2
>> +#define AUD_CLKID_TDMIN_B 3
>> +#define AUD_CLKID_TDMIN_LB 4
>> +#define AUD_CLKID_LOOPBACK 5
>> +#define AUD_CLKID_TDMOUT_A 6
>> +#define AUD_CLKID_TDMOUT_B 7
>> +#define AUD_CLKID_FRDDR_A 8
>> +#define AUD_CLKID_FRDDR_B 9
>> +#define AUD_CLKID_TODDR_A 10
>> +#define AUD_CLKID_TODDR_B 11
>> +#define AUD_CLKID_SPDIFIN 12
>> +#define AUD_CLKID_RESAMPLE 13
>> +#define AUD_CLKID_EQDRC 14
>> +#define AUD_CLKID_LOCKER 15
>> +#define AUD_CLKID_MST_A_MCLK_SEL 16
>> +#define AUD_CLKID_MST_A_MCLK_DIV 17
>> +#define AUD_CLKID_MST_A_MCLK 18
>> +#define AUD_CLKID_MST_B_MCLK_SEL 19
>> +#define AUD_CLKID_MST_B_MCLK_DIV 20
>> +#define AUD_CLKID_MST_B_MCLK 21
>> +#define AUD_CLKID_MST_C_MCLK_SEL 22
>> +#define AUD_CLKID_MST_C_MCLK_DIV 23
>> +#define AUD_CLKID_MST_C_MCLK 24
>> +#define AUD_CLKID_MST_D_MCLK_SEL 25
>> +#define AUD_CLKID_MST_D_MCLK_DIV 26
>> +#define AUD_CLKID_MST_D_MCLK 27
>> +#define AUD_CLKID_SPDIFIN_CLK_SEL 28
>> +#define AUD_CLKID_SPDIFIN_CLK_DIV 29
>> +#define AUD_CLKID_SPDIFIN_CLK 30
>> +#define AUD_CLKID_RESAMPLE_CLK_SEL 31
>> +#define AUD_CLKID_RESAMPLE_CLK_DIV 32
>> +#define AUD_CLKID_RESAMPLE_CLK 33
>> +#define AUD_CLKID_LOCKER_IN_CLK_SEL 34
>> +#define AUD_CLKID_LOCKER_IN_CLK_DIV 35
>> +#define AUD_CLKID_LOCKER_IN_CLK 36
>> +#define AUD_CLKID_LOCKER_OUT_CLK_SEL 37
>> +#define AUD_CLKID_LOCKER_OUT_CLK_DIV 38
>> +#define AUD_CLKID_LOCKER_OUT_CLK 39
>> +#define AUD_CLKID_EQDRC_CLK_SEL 40
>> +#define AUD_CLKID_EQDRC_CLK_DIV 41
>> +#define AUD_CLKID_EQDRC_CLK 42
>> +#define AUD_CLKID_MST_A_SCLK_PRE_EN 43
>> +#define AUD_CLKID_MST_A_SCLK_DIV 44
>> +#define AUD_CLKID_MST_A_SCLK_POST_EN 45
>> +#define AUD_CLKID_MST_A_SCLK 46
>> +#define AUD_CLKID_MST_B_SCLK_PRE_EN 47
>> +#define AUD_CLKID_MST_B_SCLK_DIV 48
>> +#define AUD_CLKID_MST_B_SCLK_POST_EN 49
>> +#define AUD_CLKID_MST_B_SCLK 50
>> +#define AUD_CLKID_MST_C_SCLK_PRE_EN 51
>> +#define AUD_CLKID_MST_C_SCLK_DIV 52
>> +#define AUD_CLKID_MST_C_SCLK_POST_EN 53
>> +#define AUD_CLKID_MST_C_SCLK 54
>> +#define AUD_CLKID_MST_D_SCLK_PRE_EN 55
>> +#define AUD_CLKID_MST_D_SCLK_DIV 56
>> +#define AUD_CLKID_MST_D_SCLK_POST_EN 57
>> +#define AUD_CLKID_MST_D_SCLK 58
>> +#define AUD_CLKID_MST_A_LRCLK_DIV 59
>> +#define AUD_CLKID_MST_A_LRCLK 60
>> +#define AUD_CLKID_MST_B_LRCLK_DIV 61
>> +#define AUD_CLKID_MST_B_LRCLK 62
>> +#define AUD_CLKID_MST_C_LRCLK_DIV 63
>> +#define AUD_CLKID_MST_C_LRCLK 64
>> +#define AUD_CLKID_MST_D_LRCLK_DIV 65
>> +#define AUD_CLKID_MST_D_LRCLK 66
>> +#define AUD_CLKID_TDMIN_A_SCLK_SEL 67
>> +#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN 68
>> +#define AUD_CLKID_TDMIN_A_SCLK_POST_EN 69
>> +#define AUD_CLKID_TDMIN_A_SCLK 70
>> +#define AUD_CLKID_TDMIN_A_LRCLK 71
>> +#define AUD_CLKID_TDMIN_B_SCLK_SEL 72
>> +#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN 73
>> +#define AUD_CLKID_TDMIN_B_SCLK_POST_EN 74
>> +#define AUD_CLKID_TDMIN_B_SCLK 75
>> +#define AUD_CLKID_TDMIN_B_LRCLK 76
>> +#define AUD_CLKID_TDMIN_LB_SCLK_SEL 77
>> +#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN 78
>> +#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN 79
>> +#define AUD_CLKID_TDMIN_LB_SCLK 80
>> +#define AUD_CLKID_TDMIN_LB_LRCLK 81
>> +#define AUD_CLKID_TDMOUT_A_SCLK_SEL 82
>> +#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN 83
>> +#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN 84
>> +#define AUD_CLKID_TDMOUT_A_SCLK 85
>> +#define AUD_CLKID_TDMOUT_A_LRCLK 86
>> +#define AUD_CLKID_TDMOUT_B_SCLK_SEL 87
>> +#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN 88
>> +#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN 89
>> +#define AUD_CLKID_TDMOUT_B_SCLK 90
>> +#define AUD_CLKID_TDMOUT_B_LRCLK 91
>> +
>> +#define AUD2_CLKID_DDR_ARB 1
>> +#define AUD2_CLKID_PDM 2
>> +#define AUD2_CLKID_TDMIN_VAD 3
>> +#define AUD2_CLKID_TODDR_VAD 4
>> +#define AUD2_CLKID_VAD 5
>> +#define AUD2_CLKID_AUDIOTOP 6
>> +#define AUD2_CLKID_VAD_MCLK_SEL 7
>> +#define AUD2_CLKID_VAD_MCLK_DIV 8
>> +#define AUD2_CLKID_VAD_MCLK 9
>> +#define AUD2_CLKID_VAD_CLK_SEL 10
>> +#define AUD2_CLKID_VAD_CLK_DIV 11
>> +#define AUD2_CLKID_VAD_CLK 12
>> +#define AUD2_CLKID_PDM_DCLK_SEL 13
>> +#define AUD2_CLKID_PDM_DCLK_DIV 14
>> +#define AUD2_CLKID_PDM_DCLK 15
>> +#define AUD2_CLKID_PDM_SYSCLK_SEL 16
>> +#define AUD2_CLKID_PDM_SYSCLK_DIV 17
>> +#define AUD2_CLKID_PDM_SYSCLK 18
>> +
>> +#endif /* __A1_AUDIO_CLKC_BINDINGS_H */
>> diff --git a/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>> new file mode 100644
>> index 000000000000..653fddba1d8f
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>> @@ -0,0 +1,29 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
>> +#define _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
>> +
>> +#define AUD_RESET_DDRARB 0
>> +#define AUD_RESET_TDMIN_A 1
>> +#define AUD_RESET_TDMIN_B 2
>> +#define AUD_RESET_TDMIN_LB 3
>> +#define AUD_RESET_LOOPBACK 4
>> +#define AUD_RESET_TDMOUT_A 5
>> +#define AUD_RESET_TDMOUT_B 6
>> +#define AUD_RESET_FRDDR_A 7
>> +#define AUD_RESET_FRDDR_B 8
>> +#define AUD_RESET_TODDR_A 9
>> +#define AUD_RESET_TODDR_B 10
>> +#define AUD_RESET_SPDIFIN 11
>> +#define AUD_RESET_RESAMPLE 12
>> +#define AUD_RESET_EQDRC 13
>> +#define AUD_RESET_LOCKER 14
>> +#define AUD_RESET_TOACODEC 30
>> +#define AUD_RESET_CLKTREE 31
>> +
>> +#endif /* _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H */
>
>
--
Best regards
Jan Dakinevich
More information about the linux-arm-kernel
mailing list