[PATCH 3/3] arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit

[Gilles Talis]

Hi Andrew,

Thank you for your review.

Le jeu. 28 mars 2024 à 18:11, Andrew Lunn <andrew at lunn.ch> a écrit :
>
> > +&eqos {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_eqos>;
> > +     phy-mode = "rgmii-id";
> > +     phy-handle = <&ethphy0>;
> > +     status = "okay";
> > +
> > +     mdio {
> > +             compatible = "snps,dwmac-mdio";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             ethphy0: ethernet-phy at 0 {
> > +                     compatible = "ethernet-phy-ieee802.3-c22";
> > +                     reg = <0>;
> > +                     reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
> > +                     reset-assert-us = <1000>;
> > +                     reset-deassert-us = <10000>;
> > +                     qca,disable-smarteee;
> > +                     qca,disable-hibernation-mode;
> > +                     vddio-supply = <&vddio>;
> > +
> > +                     vddio: vddio-regulator {
> > +                             regulator-min-microvolt = <1800000>;
> > +                             regulator-max-microvolt = <1800000>;
> > +                     };
>
> Please could you explain what this last node is doing.
>
>        Andrew
It seems like this might not be needed. Will check that and fix as appropriate.
thanks
Gilles.