[PATCH 1/3] ARM: dts: Modify GPIO table for Asrock X570D4U BMC
Renze Nicolai
renze at rnplus.nl
Fri Mar 29 06:01:39 PDT 2024
This commit removes button-nmi-n, this board does not have support for an NMI button.
Input status-locatorled-n has been renamed to input-locatorled-n to better indicate the signal type.
The suffix -n has been appended to the name of control-locatorbutton, button-power, control-power, button-reset, control-reset, input-id0, input-id1, input-id2, output-bmc-ready to reflect the inverted signal polarity.
GPIO output-rtc-battery-voltage-read-enable has been renamed to output-hwm-vbat-enable, input-alert1-n to input-aux-smb-alert-n, input-alert3-n to input-psu-smb-alert-n, input-mfg to input-mfg-mode-n and input-caseopen to input-case-open-n.
And GPIOs input-bmc-smb-present-n, input-pcie-wake-n, input-sleep-s3-n, input-sleep-s5-n and input-power-good have been added.
Signed-off-by: Renze Nicolai <renze at rnplus.nl>
---
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 3c975bc41ae7..34bc382bf492 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -79,64 +79,64 @@ iio-hwmon {
&gpio {
status = "okay";
gpio-line-names =
- /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
- /*A4-A7*/ "", "", "", "",
- /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
- /*B4-B7*/ "", "", "", "",
- /*C0-C3*/ "", "", "", "",
- /*C4-C7*/ "", "", "control-locatorbutton", "",
- /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
- /*D4-D7*/ "", "", "", "",
- /*E0-E3*/ "", "", "", "",
- /*E4-E7*/ "", "", "", "",
- /*F0-F3*/ "", "", "", "",
- /*F4-F7*/ "", "", "", "",
- /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
- /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
- /*H0-H3*/ "", "", "", "",
- /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
- /*I0-I3*/ "", "", "", "",
- /*I4-I7*/ "", "", "", "",
- /*J0-J3*/ "output-bmc-ready", "", "", "",
- /*J4-J7*/ "", "", "", "",
- /*K0-K3*/ "", "", "", "",
- /*K4-K7*/ "", "", "", "",
- /*L0-L3*/ "", "", "", "",
- /*L4-L7*/ "", "", "", "",
- /*M0-M3*/ "", "", "", "",
- /*M4-M7*/ "", "", "", "",
- /*N0-N3*/ "", "", "", "",
- /*N4-N7*/ "", "", "", "",
- /*O0-O3*/ "", "", "", "",
- /*O4-O7*/ "", "", "", "",
- /*P0-P3*/ "", "", "", "",
- /*P4-P7*/ "", "", "", "",
- /*Q0-Q3*/ "", "", "", "",
- /*Q4-Q7*/ "", "", "", "",
- /*R0-R3*/ "", "", "", "",
- /*R4-R7*/ "", "", "", "",
- /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
- /*S4-S7*/ "", "", "", "",
- /*T0-T3*/ "", "", "", "",
- /*T4-T7*/ "", "", "", "",
- /*U0-U3*/ "", "", "", "",
- /*U4-U7*/ "", "", "", "",
- /*V0-V3*/ "", "", "", "",
- /*V4-V7*/ "", "", "", "",
- /*W0-W3*/ "", "", "", "",
- /*W4-W7*/ "", "", "", "",
- /*X0-X3*/ "", "", "", "",
- /*X4-X7*/ "", "", "", "",
- /*Y0-Y3*/ "", "", "", "",
- /*Y4-Y7*/ "", "", "", "",
- /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
- /*Z4-Z7*/ "", "", "", "",
- /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
- /*AA4-AC7*/ "", "", "", "",
- /*AB0-AB3*/ "", "", "", "",
- /*AB4-AC7*/ "", "", "", "",
- /*AC0-AC3*/ "", "", "", "",
- /*AC4-AC7*/ "", "", "", "";
+ /*A0-A3*/ "input-locatorled-n", "", "", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton-n", "",
+ /*D0-D3*/ "button-power-n", "control-power-n", "button-reset-n", "control-reset-n",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n", "input-id2-n",
+ /*G4-G7*/ "input-aux-smb-alert-n", "", "input-psu-smb-alert-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg-mode-n", "", "led-heartbeat-n", "input-case-open-n",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready-n", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "input-bmc-smb-present-n", "", "", "input-pcie-wake-n",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "input-sleep-s3-n", "input-sleep-s5-n", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "input-power-good", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
};
&fmc {
--
2.44.0
More information about the linux-arm-kernel
mailing list