[PATCH 0/3] Add support for Emcraft Systems NavQ+ kit

[Gilles Talis]

Hello

This series adds a device tree file for the Emcraft Systems NavQ+ kit [1]

The first patch adds a new vendor prefix for Emcraft Systems
The second one adds the board to the arm/fsl.yaml DT bindings.
Last patch adds device tree file for the kit.

[1] https://www.emcraft.com/products/1222


Gilles Talis (3):
  dt-bindings: vendor-prefixes: Add Emcraft Systems
  dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
  arm64: dts: freescale: Add device tree for Emcraft Systems NavQ+ Kit

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/imx8mp-navqp.dts | 435 ++++++++++++++++++
 4 files changed, 439 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-navqp.dts


base-commit: 4cece764965020c22cff7665b18a012006359095
-- 
2.39.2