[PATCH V4 2/2] cpufreq: scmi: Register for limit change notifications

[Lukasz Luba]

On 3/28/24 07:41, Sibi Sankar wrote:
> Register for limit change notifications if supported and use the throttled
> frequency from the notification to apply HW pressure.
> 
> Signed-off-by: Sibi Sankar <quic_sibis at quicinc.com>
> ---
> 
> v4:
> * Use a interim variable to show the khz calc. [Lukasz]
> * Use driver_data to pass on the handle and scmi_dev instead of using
>    global variables. Dropped Lukasz's Rb due to adding these minor
>    changes.
> 
>   drivers/cpufreq/scmi-cpufreq.c | 44 ++++++++++++++++++++++++++++++++++
>   1 file changed, 44 insertions(+)
> 
> diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
> index 3b4f6bfb2f4c..d946b7a08258 100644
> --- a/drivers/cpufreq/scmi-cpufreq.c
> +++ b/drivers/cpufreq/scmi-cpufreq.c
> @@ -21,11 +21,18 @@
>   #include <linux/types.h>
>   #include <linux/units.h>
>   
> +struct scmi_cpufreq_driver_data {
> +	struct scmi_device *sdev;
> +	const struct scmi_handle *handle;
> +};
> +
>   struct scmi_data {
>   	int domain_id;
>   	int nr_opp;
>   	struct device *cpu_dev;
> +	struct cpufreq_policy *policy;
>   	cpumask_var_t opp_shared_cpus;
> +	struct notifier_block limit_notify_nb;
>   };
>   
>   static struct scmi_protocol_handle *ph;
> @@ -174,6 +181,22 @@ static struct freq_attr *scmi_cpufreq_hw_attr[] = {
>   	NULL,
>   };
>   
> +static int scmi_limit_notify_cb(struct notifier_block *nb, unsigned long event, void *data)
> +{
> +	struct scmi_data *priv = container_of(nb, struct scmi_data, limit_notify_nb);
> +	struct scmi_perf_limits_report *limit_notify = data;
> +	struct cpufreq_policy *policy = priv->policy;
> +	unsigned int limit_freq_khz;
> +
> +	limit_freq_khz = limit_notify->range_max_freq / HZ_PER_KHZ;
> +
> +	policy->max = clamp(limit_freq_khz, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
> +
> +	cpufreq_update_pressure(policy);
> +
> +	return NOTIFY_OK;
> +}
> +
>   static int scmi_cpufreq_init(struct cpufreq_policy *policy)
>   {
>   	int ret, nr_opp, domain;
> @@ -181,6 +204,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
>   	struct device *cpu_dev;
>   	struct scmi_data *priv;
>   	struct cpufreq_frequency_table *freq_table;
> +	struct scmi_cpufreq_driver_data *data = cpufreq_get_driver_data();
>   
>   	cpu_dev = get_cpu_device(policy->cpu);
>   	if (!cpu_dev) {
> @@ -294,6 +318,17 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
>   		}
>   	}
>   
> +	priv->limit_notify_nb.notifier_call = scmi_limit_notify_cb;
> +	ret = data->handle->notify_ops->devm_event_notifier_register(data->sdev, SCMI_PROTOCOL_PERF,
> +							SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED,
> +							&domain,
> +							&priv->limit_notify_nb);
> +	if (ret)
> +		dev_warn(cpu_dev,
> +			 "failed to register for limits change notifier for domain %d\n", domain);
> +
> +	priv->policy = policy;
> +
>   	return 0;
>   
>   out_free_opp:
> @@ -366,12 +401,21 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev)
>   	int ret;
>   	struct device *dev = &sdev->dev;
>   	const struct scmi_handle *handle;
> +	struct scmi_cpufreq_driver_data *data;
>   
>   	handle = sdev->handle;
>   
>   	if (!handle)
>   		return -ENODEV;
>   
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	data->sdev = sdev;
> +	data->handle = handle;
> +	scmi_cpufreq_driver.driver_data = data;
> +
>   	perf_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_PERF, &ph);
>   	if (IS_ERR(perf_ops))
>   		return PTR_ERR(perf_ops);

LGTM,

Reviewed-by: Lukasz Luba <lukasz.luba at arm.com>