[PATCH v1] ARM: dts: stm32: Update button on stm32mp135f-dk

[patrice.chotard at foss.st.com]

From: Patrice Chotard <patrice.chotard at foss.st.com>

On schematics, 2 buttons are available on stm32mp135-dk board:
  _ button "user1" connected to GPIOA14
  _ button "user2" connected to GPIOA13

Reflect that on device tree.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 52171214a308..f7e03bc7eccb 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -48,9 +48,15 @@ optee at dd000000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button-user {
-			label = "User-PA13";
+		button-user-1 {
+			label = "User-1";
 			linux,code = <BTN_1>;
+			gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+
+		button-user-2 {
+			label = "User-2";
+			linux,code = <BTN_2>;
 			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 		};
 	};
-- 
2.25.1