[PATCH 1/2] arm64: dts: rockchip: enable gpu on rk3588-jaguar

Heiko Stübner heiko at sntech.de
Wed Mar 27 13:30:55 PDT 2024


Am Mittwoch, 27. März 2024, 16:41:16 CET schrieb Rob Herring:
> 
> On Wed, 27 Mar 2024 12:21:19 +0100, Heiko Stuebner wrote:
> > From: Heiko Stuebner <heiko.stuebner at cherry.de>
> > 
> > Enable the mali gpu node and add the board-specific supply-regulator.
> > 
> > Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y rockchip/rk3588-jaguar.dtb' for 20240327112120.1181570-1-heiko at sntech.de:
> 
> Error: arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts:248.1-5 Label or path gpu not found
> FATAL ERROR: Syntax error parsing input tree
> make[3]: *** [scripts/Makefile.lib:427: arch/arm64/boot/dts/rockchip/rk3588-jaguar.dtb] Error 1
> make[2]: *** [scripts/Makefile.build:485: arch/arm64/boot/dts/rockchip] Error 2
> make[2]: Target 'arch/arm64/boot/dts/rockchip/rk3588-jaguar.dtb' not remade because of errors.
> make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1387: rockchip/rk3588-jaguar.dtb] Error 2
> make: *** [Makefile:240: __sub-make] Error 2
> make: Target 'rockchip/rk3588-jaguar.dtb' not remade because of errors.

just for the record, that error fixes itself because the patch gets applied only after
the main series adding that gpu node ;-)


Heiko





More information about the linux-arm-kernel mailing list