[PATCH v2 2/2] dmaengine: xilinx: dpdma: Add support for cyclic dma mode

Tomi Valkeinen tomi.valkeinen at ideasonboard.com
Wed Mar 27 05:53:04 PDT 2024


On 28/02/2024 06:21, Vishal Sagar wrote:
> From: Rohit Visavalia <rohit.visavalia at xilinx.com>
> 
> This patch adds support for DPDMA cyclic dma mode,
> DMA cyclic transfers are required by audio streaming.
> 
> Signed-off-by: Rohit Visavalia <rohit.visavalia at amd.com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
> Signed-off-by: Vishal Sagar <vishal.sagar at amd.com>
> 
> ---
>   drivers/dma/xilinx/xilinx_dpdma.c | 97 +++++++++++++++++++++++++++++++
>   1 file changed, 97 insertions(+)
> 
> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
> index 28d9af8f00f0..88ad2f35538a 100644
> --- a/drivers/dma/xilinx/xilinx_dpdma.c
> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
> @@ -669,6 +669,84 @@ static void xilinx_dpdma_chan_free_tx_desc(struct virt_dma_desc *vdesc)
>   	kfree(desc);
>   }
>   
> +/**
> + * xilinx_dpdma_chan_prep_cyclic - Prepare a cyclic dma descriptor
> + * @chan: DPDMA channel
> + * @buf_addr: buffer address
> + * @buf_len: buffer length
> + * @period_len: number of periods
> + * @flags: tx flags argument passed in to prepare function
> + *
> + * Prepare a tx descriptor incudling internal software/hardware descriptors
> + * for the given cyclic transaction.
> + *
> + * Return: A dma async tx descriptor on success, or NULL.
> + */
> +static struct dma_async_tx_descriptor *
> +xilinx_dpdma_chan_prep_cyclic(struct xilinx_dpdma_chan *chan,
> +			      dma_addr_t buf_addr, size_t buf_len,
> +			      size_t period_len, unsigned long flags)
> +{
> +	struct xilinx_dpdma_tx_desc *tx_desc;
> +	struct xilinx_dpdma_sw_desc *sw_desc, *last = NULL;
> +	unsigned int periods = buf_len / period_len;
> +	unsigned int i;
> +
> +	tx_desc = xilinx_dpdma_chan_alloc_tx_desc(chan);
> +	if (!tx_desc)
> +		return (void *)tx_desc;

Just return NULL here?

> +
> +	for (i = 0; i < periods; i++) {
> +		struct xilinx_dpdma_hw_desc *hw_desc;
> +
> +		if (!IS_ALIGNED(buf_addr, XILINX_DPDMA_ALIGN_BYTES)) {
> +			dev_err(chan->xdev->dev,
> +				"buffer should be aligned at %d B\n",
> +				XILINX_DPDMA_ALIGN_BYTES);
> +			goto error;
> +		}
> +
> +		sw_desc = xilinx_dpdma_chan_alloc_sw_desc(chan);
> +		if (!sw_desc)
> +			goto error;
> +
> +		xilinx_dpdma_sw_desc_set_dma_addrs(chan->xdev, sw_desc, last,
> +						   &buf_addr, 1);
> +		hw_desc = &sw_desc->hw;
> +		hw_desc->xfer_size = period_len;
> +		hw_desc->hsize_stride =
> +			FIELD_PREP(XILINX_DPDMA_DESC_HSIZE_STRIDE_HSIZE_MASK,
> +				   period_len) |
> +			FIELD_PREP(XILINX_DPDMA_DESC_HSIZE_STRIDE_STRIDE_MASK,
> +				   period_len);
> +		hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_PREEMBLE;
> +		hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_IGNORE_DONE;
> +		hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_COMPLETE_INTR;

You could:

hw_desc->control |= XILINX_DPDMA_DESC_CONTROL_PREEMBLE |
		    XILINX_DPDMA_DESC_CONTROL_IGNORE_DONE |
		    XILINX_DPDMA_DESC_CONTROL_COMPLETE_INTR;

Although... Shouldn't control always be 0 here, so you can just 
hw_desc->control = ...;

> +
> +		list_add_tail(&sw_desc->node, &tx_desc->descriptors);
> +
> +		buf_addr += period_len;
> +		last = sw_desc;
> +	}
> +
> +	sw_desc = list_first_entry(&tx_desc->descriptors,
> +				   struct xilinx_dpdma_sw_desc, node);
> +	last->hw.next_desc = lower_32_bits(sw_desc->dma_addr);
> +	if (chan->xdev->ext_addr)
> +		last->hw.addr_ext |=
> +			FIELD_PREP(XILINX_DPDMA_DESC_ADDR_EXT_NEXT_ADDR_MASK,
> +				   upper_32_bits(sw_desc->dma_addr));
> +
> +	last->hw.control |= XILINX_DPDMA_DESC_CONTROL_LAST_OF_FRAME;
> +
> +	return vchan_tx_prep(&chan->vchan, &tx_desc->vdesc, flags);
> +
> +error:
> +	xilinx_dpdma_chan_free_tx_desc(&tx_desc->vdesc);
> +
> +	return NULL;
> +}
> +
>   /**
>    * xilinx_dpdma_chan_prep_interleaved_dma - Prepare an interleaved dma
>    *					    descriptor
> @@ -1190,6 +1268,23 @@ static void xilinx_dpdma_chan_handle_err(struct xilinx_dpdma_chan *chan)
>   /* -----------------------------------------------------------------------------
>    * DMA Engine Operations
>    */
> +static struct dma_async_tx_descriptor *
> +xilinx_dpdma_prep_dma_cyclic(struct dma_chan *dchan, dma_addr_t buf_addr,
> +			     size_t buf_len, size_t period_len,
> +			     enum dma_transfer_direction direction,
> +			     unsigned long flags)
> +{
> +	struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
> +
> +	if (direction != DMA_MEM_TO_DEV)
> +		return NULL;
> +
> +	if (buf_len % period_len)
> +		return NULL;
> +
> +	return xilinx_dpdma_chan_prep_cyclic(chan, buf_addr, buf_len,
> +						 period_len, flags);

The parameters should be aligned above.

> +}
>   
>   static struct dma_async_tx_descriptor *
>   xilinx_dpdma_prep_interleaved_dma(struct dma_chan *dchan,
> @@ -1673,6 +1768,7 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>   
>   	dma_cap_set(DMA_SLAVE, ddev->cap_mask);
>   	dma_cap_set(DMA_PRIVATE, ddev->cap_mask);
> +	dma_cap_set(DMA_CYCLIC, ddev->cap_mask);
>   	dma_cap_set(DMA_INTERLEAVE, ddev->cap_mask);
>   	dma_cap_set(DMA_REPEAT, ddev->cap_mask);
>   	dma_cap_set(DMA_LOAD_EOT, ddev->cap_mask);
> @@ -1680,6 +1776,7 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
>   
>   	ddev->device_alloc_chan_resources = xilinx_dpdma_alloc_chan_resources;
>   	ddev->device_free_chan_resources = xilinx_dpdma_free_chan_resources;
> +	ddev->device_prep_dma_cyclic = xilinx_dpdma_prep_dma_cyclic;
>   	ddev->device_prep_interleaved_dma = xilinx_dpdma_prep_interleaved_dma;
>   	/* TODO: Can we achieve better granularity ? */
>   	ddev->device_tx_status = dma_cookie_status;

While I'm not too familiar with dma engines, this looks fine to me. So, 
other than the few cosmetics comments:

Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>

  Tomi




More information about the linux-arm-kernel mailing list